Canadian Petroleum By Products Suppliers and Manufacturers

KAZAKHSTAN AVIATION TURBINE FUEL JET A1/TS-1 KEROSENE Quantity: 1,000,000-5,000,000 Barrels CIF Price: Gross $85USD per Barrels / Net $80USD per Barrels FOB Price: Gross $80USD per Barrels / Net $88 USD per Barrels TERMS & OPERATIONAL PROCEDURE: C.I.F 1. Buyer issues ICPO must be with buyer company letterhead and buyer banking information. 2. Seller issues Draft Contract (open for any amendments) to Buyer. Buyer signs, seals and returns the Draft Contract to Seller for final endorsement with letter of acceptance. Seller gives Partial proof of products. (A) Certificate of Origin (B) Product quality passport (Analysis test Report) By KAZAKHSTAN standard gost R (C) Commercial Invoice (D) Statement of availability of product 3. Within 7 banking days, Buyers bank sends Transferable SBLC, DLC, BG via MT760/MT700 Letter Credit according to sellers fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, should buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $ 400,000 by TT wire transfer for security guarantee to enable seller charter vessel and commence shipment, and this payment will be deducted from the total cost of product after inspection at discharge port, Sellers Bank issues Full POP Documents to the Buyers Bank alongside with the 2% Performance Bond (PB) a) Copy of license to export, issued by the department of the Ministry of Energy, KAZAKHSTAN Federation. b) Copy of Approval to Export, issued by the Ministry of Justice, KAZAKHSTAN Federation. c) Copy of statement of availability of the product. d) Copy of the refinery commitment to produce the product. e) Copy of Transnet contract to transport the product to the loading port. f) Copy of the port storage agreement. g) Copy of the charter party agreement to transport the product to discharge port h) Copy of Vessel Questionnaire 88. i) Copy of Bill of Lading. j) SGS Report at loading port. k) Dip test Authorization (DTA) & ATB l) NOR /ETA m) Certificate of Ownership Transfer n) Allocation Transaction Passport Code Certificate (ATPCC) by Ministry of Energy Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyers discharge port within 5- 25 days. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 4. Buyer releases payment to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS/CIQ at destination port. 5. Seller pays commission within 48 hours by swift MT103 to all intermediaries as signed NCNDA/IMPFA.

PRODUCT ORIGIN: GEORGIA, KAZHAKSTAN UAE, EUROPE, SINGAPORE ETC (NON-SANCTIONED) Quantity: 700,000 Bbl - 2,000,000 Bbl Trial lift Quantity: 2,000,000 Bbl 5,000,000 Bbl per Month x 12 Months Price FOB: USD $63 Gross / USD 61 Net Per Barrel Price CIF: USD $83 Gross / USD $81 Net Per Barrel Loading port: Houston ,Rotterdam, Batumi, Poti , Akta, Kuryk UAE -SINGAPORE

Sales Specifications Appearance: Black Powder/Granules pH: 5.15 -5.63 Moisture as Packed: 3.2- 4.6 Iodine Number (mg/g): 1110.05 - 1120.79 -40 Mesh: 0.5 -1.55% Hardness Number: 98 Total Ash Content: 3.5 -3.7% Packing 55.12 LB Bag, 40 bags per pallet

ESPO (Eastern Siberia-Pacific Ocean) oil is a premium blend of crude oil primarily exported from Russia. This light, sweet crude has gained significant traction in the global market. ESPO oil is extracted from fields in Eastern Siberia and transported via the Eastern Siberia-Pacific Ocean pipeline. Pipeline: The ESPO pipeline, stretching from Taishet in Irkutsk Oblast to the Pacific port of Kozmino, facilitates the transportation of this crude. ESPO crude has an API gravity typically around 34-35 degrees, classifying it as a light crude oil. It has a low sulfur content, usually between 0.5% and 0.6%, making it a sweet crude. This low sulfur content is advantageous for refining into high-quality fuels with lower environmental impact. ESPO oil is known for its low metal and salt content, further enhancing its desirability for refineries seeking to produce cleaner fuels. ESPO crude often commands a premium price compared to other Russian crude grades like Urals, due to its superior quality and favorable location. Pricing for ESPO oil is typically benchmarked against Dubai/Oman crude prices. Espo has low sulfur content in ESPO oil translates to lower sulfur dioxide emissions when refined, contributing to reduced environmental impact compared to higher sulfur crude oils. Price: FOB $68/$64 CIF $65/$61 Availability: In Stock Origin: Russia / Kazakhstan. For more details contact us.

Liquefied petroleum gases (LPG): A group of hydrocarbon gases, primarily propane, normal butane, and isobutane, derived from crude oil refining or natural gas processing. These gases may be marketed individually or mixed. Liquefied petroleum gas, also referred to as LPG or LP gas, is� a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, n-butane and isobutane. LPG, any of several liquid mixtures of the volatile hydrocarbonâ??s propene, propane, butene, and butane. It was used as early as 1860 for a portable fuel source, and its production and consumption for both domestic and industrial use have expanded ever since. A typical commercial mixture may also contain ethane and ethylene, as well as a volatile mercaptan, an odorant added as a safety precaution.

liquefied natural gas (LNG), natural gas (primarily methane) that has been liquefied for ease of storing and transporting. Liquefied natural gas (LNG) is 600 times smaller than natural gas when the latter is in its gaseous form, and it can be easily shipped overseas. LNG is produced by cooling natural gas below its boiling point, â??162 �°C (â??259 �°F), and is stored in double-walled cryogenic containers at or slightly above atmospheric pressure. It can be converted back to its gaseous form by simply raising the temperature. Natural gas is a hydrocarbon mixture consisting primarily of saturated light paraffins such as methane and ethane, both of which are gaseous under atmospheric conditions. The mixture also may contain other hydrocarbons, such as propane, butane, pentane, and hexane. In natural gas reservoirs even, the heavier hydrocarbons occur for the most part in gaseous form because of the higher pressures. They usually liquefy at the surface (at atmospheric pressure) and are produced separately as natural gas liquids (NGLs), either in field separators or in gas processing plants. Once separated from the gas stream, the NGLs can be further separated into fractions, ranging from the heaviest condensates (hexanes, pentanes, and butanes) through liquefied petroleum gas (LPG; essentially butane and propane) to ethane. This source of light hydrocarbons is especially prominent in the United States, where natural gas processing provides a major portion of the ethane feedstock for olefin manufacture and the LPG for heating and commercial purposes.

Light Cycle Oil (LCO) is a diesel boiling range product from� fluid catalytic cracking� units. flexible process to process LCO into desired products such as very-low sulphur diesel and high- octane high-aromatics naphtha. It is a light lubricating oil that is suitable for use on bicycles and similar equipment. It is a diesel boiling range product� from fluid catalytic cracking units. Light cycle oil is a poor diesel fuel blending component. LCO are produced at the bottom of the fluidized catalytic cracking (FCC) process in a refinery and are enriched with� 50-80 wt% heterocyclic aromatic compounds, 3 wt% S, and 600 ppm N.

Crude oil is a naturally occurring, unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds. It is the raw material that is used to produce a variety of refined petroleum products, including gasoline, diesel fuel, and heating oil. Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products. Crude oil has a wide range of physical properties. Crude oil is made up of 84.5% carbon, 13% hydrogen, 1â??3% sulfur, and less than 1% each of nitrogen, oxygen, metals, and salts. REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions. It is a high-quality crude oil that is known for its low sulfur content and low viscosity. The middle east light crude oil is also high-quality crude oil. The GOST 51 858-2002 specification refers to the Russian standard for REBCO, which outlines the crude oils characteristics and performance requirements. Gost 51 858 2002 offers from exporters, manufacturers, suppliers, wholesalers and distributors globally by price, and quality of the oil. REBCO is an important commodity in the global energy market, and it is carefully regulated to ensure that it meets the necessary standards for safety and performance. Maximum Sulfur Content 1,8% Paraffin Content 6,0%, Maximum Water & Sediment Content 1,2%, Distillation, Weight 21% Up to 200 N min 21, Up to 300 N min 41, Up to 350 N min 50 and Maximum salts content, MG/L 100.

The term bitumen refers to a substance produced through the distillation of crude oil. Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. The two Bitumen grades are 60/70 and 80/100. The difference between 60/70 and 80/100 penetration grade is the penetration range.� Bitumen 60/70 has lower penetration which means it is harder than bitumen 80/100. Bitumen 60/70 is better suited for use in hot climates and can withstand heavy traffic loads, unlike bitumen 80/100. According to the ASTM D36 method,� the softening point of bitumen 60/70 is between 49 to 56�°C, and the flash point of bitumen 60/70 is 250 �°C. Another important factor is density. Due to the ASTM D70, the density of bitumen 60/70 is equal to 1.0344. Bitumen Penetration Grade 85/100 is� a standard penetration grade. Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Base oil 150N is defined as a light base oil at the lower end of the specification compared to a Class II light base oil. They are mainly used in the production of lubricating additives and lubricants. . Because it is a Group II base oil, it has undergone hydrocrack treatment steps to remove any impurities.