Specification For Hard Wood Charcoal High heating value Smokeless Energy saving and environmental protection Low ash content Raw material: Orange Wood Shape: Quadrilateral and Hexagon Burning time: 3-5 hours Length: 10-30cm Diameter: 3.8-4.2cm Fixed carbon content: Above 95% Water content: Below 4% Calorific value: Above 8000(cal/kg) Carbonization Temperature: 800 C Ash content: 4% Moisture: 4%-5% Package: 10kg/carton Box Package: According customers requirement One Box Charcoal Weight: 10Kg
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply: Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels. Key characteristics of Diesel D6 may include: High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery. Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards. Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates. Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed. For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries. Origin: Kazakhstan / Russia.
We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous. Excellent Wood Pellet Standard Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo. 80% pine - 20% beech (white) pellets Diameter: 6 mm Lenght: < 30 mm Humidity: < 10% Calorific value: 4300 +/- 0,05 Kcal/kg Sulfur: < 0,03% Ash content: < 0,7% Additives: < 2% Pine wood pellets 6mm 4-40mm lenght, moisture
Class A1 Pine Wood Pellets 6mm DIN+ plus & ENplus A1/A2 ( BSL Approved Wood Pellets In 15kg bags ) We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous. Excellent Wood Pellet Standard Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo. 80% pine - 20% beech (white) pellets Diameter: 6 mm Lenght: < 30 mm Humidity: < 10% Calorific value: 4300 +/- 0,05 Kcal/kg Sulfur: < 0,03% Ash content: < 0,7% Additives: < 2% Pine wood pellets 6mm 4-40mm lenght, moisture
Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel. Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits. Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.
Kiln Dried Firewood oak birch/ Firewood beech dry wood Birch ash oak firewood For Sale Firewood is made of locally supplied timber. The wood species we use to make firewood are beech, Ash, Oak, Birch, Alder, Pine, and Fir. Each log can be cut into pieces of 25, 30 or 45 cm, split 4-6 times for 8-15 cm diameter and stacked into 1m�³, 1,8m�³, 2m�³ or 2,2m�³ boxes or bags of 9.5 L, 21 L, 30 L, 40 L or 60 Liters. It is sold in 3 levels of moisture: fresh (35-55%), air-dried (25-35%) or kiln-dried (
Kiln Dried split firewood: 1. Descriptions: Kiln dried split firewood is a renewable resource, fuel that is already widely available in the world nowadays. The wood log is been split into smaller quantities. This is a hot process and the natural ligin in the wood shavings melts and binds the dust together, holding the wood in shape and giving it that characteristic seen on the outside. 2. Economic efficiency: Kiln dried split firewood are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distance. Electricity generated from kiln dried split firewood in converted coal plants is almost the same cost as electricity generated from natural gas, diesels. 3. Environmentally friendly: Kiln dried split firewood is a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also brings additional environmental and social benefits. 4. Using scopes: Dried kiln split firewood replaces fossil fuels in power plants, stoves, boiler of textile, food, leather, animal feeding, dye industrials and animal bedding.
QUALITY SPECIFICATION FOR FIREWOOD: Measures outside: 1.2 m * 0.8 m * 2.0 m. Split length: 15-25 cm width of the split: 8-16cm Wood fire size: 33 cm or 50 cm; Fire wood diameter 7 - 19 cm; Humidity: 8-12% 1 pallet= 2cbm = 1 TON 28 pallet= one container 40FT container MATERIAL: Oak/Ash/Beech/hornbeam/Alder/Birch/Pine/spruce etc We also do have,Charcoal,woodpelets,
Color Black or brown, varying shades Texture Can be smooth, granular, or banded Hardness Soft to hard, depending on coal type Luster Dull to shiny Density Varies depending on coal type, typically around 1.2-1.5 g/cm�³ Porosity Varies, can be porous Composition Mainly composed of carbon, along with hydrogen, sulfur, oxygen, and trace minerals Moisture Content Can range from a few percent to over 30% Volatile Matter Varies, typically 20-45% Fixed Carbon Varies, typically 40-90% Ash Content Varies, typically 3-30% Heating Value (BTU/lb) Varies depending on coal type, typically 8,000-14,000 BTU/lb Heating Value (MJ/kg) Varies depending on coal type, typically 24-33 MJ/kg Combustion Characteristics Burns to release heat, producing carbon dioxide and other gases
Cetane Number 51 min Density at 15�°C 820-845 Kinematic Viscosity 2.0-4.5 at 40 C Sulfur Content 10 max Distillation, 90% Recovered at �°C 370 max Total Contamination 24 max Copper Strip Corrosion, 3 hrs at 50�°C Class 1 max Water Content 200 max Sediment Content 0.05 max Cloud Point -5 max Pour Point -15 max Ash Content 0.01 max
We have diesel EN 590 10ppm Please contact us for more information
The Accu-Chek FastClix lancing device is the first lancing device with a one-click system and a lancet holder. The unique technology ensures quick, easy and virtually painless injection. The rotating hood has eleven depth settings that allow you to adjust the device to your skin type. The lancing device has a holder with six pre-filled lancets, so you do not have to handle the lancets separately. Fast and easy pricking with one click Loading slide for easy selection of a new lancet Rotating hood with eleven depth settings for different skin types Lancet holder is preloaded with six lancets so you don't have to touch needles The window next to the loading slide shows the number of lancets remaining in the holder No sharps container required Less chance of accidental pricking Thanks to the Clixmotion technology, the lancet movement is controlled with minimal vibration and rotation for comfortable puncturing Tapered, tri-cut point with optimal angles, 30G (0.3mm) lancets AST function (alternate puncture sites) is available upon request
EN590 diesel is a high-quality, ultra-low sulfur fuel designed for modern diesel engines, ensuring cleaner combustion and improved efficiency. It is widely used across industries, including transportation, construction, and power generation.
Type of wood: Hard wood and Soft wood Packaging size: 40L net bags Log length: 12,5 - 20 cm Weight of the crate: 500-650 kg Humidity: 12-15% Transportation options: Container or truck
Type of wood: birch, alder, ash, hornbeam, oak Length: 25 cm Moisture content: 10-18% Bag size: 40cm x 60cm Weight of a bag: 8-12 kg Transportation options: Container or truck
Type of wood: birch, alder, ash, hornbeam, oak Length: 25-50cm Moisture content: raw, seasoned, kiln dried Volume: 1m3 | 1,8m3 | 2 m3 Packing: Crate Transportation options: Container or truck
- Diameter 4,5 cm - Length 10-40 cm - 10kg/carton 03 layer - Carbon: 80% - Ash : < 3% - Sulfur: < 0.01% - Heat: 7,000-8,000 kcal/kg - Moisture: max 7 % - Capacity: 50-200 tons - Burning time: 4-5h - Container 40DC: 26mts (+- 10%)
Specification: - Material: mixxed sawdust - Shape: Four-edged or Hexagon - Length: 40 cm - Dia: 4,5cm - Strength: hard used for making BBQ charcoal
- Material: 100% rice husk - Size: Dia 8-10mm - Moisture: 8 % - Ash: max 13% - Calorie: 3800-4100 kcal/ kg - Packing: 50kgs/pp bag
- Material: 100% rice husk - Size: - Length 15-40cm - Dia: 8,5cm - Moisture: 8 % - Ash: max 13% - Calorie: 3800-4100 kcal/ kg - Packing: 40kgs/pp bag
