Stearyl alcohol cas 112-92-5 basic information
Product Name: 1-Octadecanol
CAS: 112-92-5
MF: C18H38O
MW: 270.49
EINECS: 204-017-6
Stearyl alcohol is white flakes or granules.Stearyl alcohol can also be called 1-Octadecanol and Octadecanol .The Melting point is 59.4-59.8�??�?�ºC
Stearyl alcohol / Octadecanol / 1-Octadecanol cas 112-92-5
Application
Used in the manufacture of surfactants
Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control
Application
Lithium metasilicate is an inorganic compound that has a high resistance to heat and acid. It is used as an additive to zirconium oxide membranes, which are used in membrane separation processes. It has been shown to have a high transport capacity for water vapor and sodium carbonate. This property makes it suitable for use in the clinical setting where it has been shown to have biological properties and clinical relevance.
HEDP.Na2 is an organophosphonic acid corrosion inhibitor, it can chelate with Fe, Cu, and Zn ions, it can dissolve the oxidized materials, it has good scale and corrosion inhibition effects even under 250 C,it is stable under high pH value, not easy to be hydrolyzed, not easy to be decomposed under normal light and heat condition, its acid/alkaline and chloride oxidation tolerance are better than that of other organophosph- onic acids. HEDP.Na2 can form six-ring chelating compounds with metal ions in water system, Ca2+ in particular. HEDP.Na2 has good scale inhibition effects and obvious dissolution threshold effects. When usedwith other Water Treatment Chemicals, the synergistic effects is better.
Application scope and method of use
HEDP.Na2 is widely used in circulating cool water system, medium and low-pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc. In light woven industry, HEDP.Na2 is used as detergent for metal and nonmetal. In dyeing industry. The dyes the industry fixing agent in non-cyanide electroplating used as chelating agent.
5510 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Benzalkonium Chloride / Dodecyl dimethyl benzyl ammonium chloride is a kind of cationic surfactant, belonging to nonoxidizing boicide. It can efficiently withhold algae propagation and sludge reproduction.
Benzalkonium Chloride also has dispersing and penetrating properties, can penetrate and remove sludge and algae, has advantages of low toxicity, no toxicity accumulation, soluble in water, convenient in use, unaffected by water hardness.
1. Benzalkonium chloride (BKC) is widely used in petroleum, chemical, power, textile and other industries in the circulating cooling water system, to control the bacteria Algae breeding in circulating cooling water system.
2.Benzalkonium chloride (BKC) can be also used as anti-mildew agent, antistatic agent, emulsifying agent and amendment agent in woven and dyeing fields.
3.Benzalkonium chloride (BKC) is also widely used as a disinfectant in the Hospital, Livestock and Personal Hygiene sectors. Dual biocidal and detergency properties ensure high efficacy against Bacteria, Algae and Fungi and enveloped Viruses at exceptionally low ppm concentrations.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5 is white crystal, soluble in organic solvents such as DMSO, derived from tea.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5 is the most effective active ingredient in catechins, accounting for about 8% to 13% of the gross weight of green tea, and (-) -Epigallocatechin Gallate CAS NO. 989-51-5 is also the component with the highest content in catechins.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5The ester formed by benzopyran with gallic acid has phenolic antioxidant properties, and (-) -Epigallocatechin Gallate CAS NO. 989-51-5 molecular structure has six adjacent phenolic hydroxyl groups, thus having many properties superior to other catechins.
BHMTPMPA is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale.
BHMTPMPA has good water-soluble properties and heat tolerance.
BHMTPMPA has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C.
BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler.
Dimethyloldimethyl hydantoin is a popular preservative with moderate sensitizing potential, it is used to control against mold, mildew, and bacterial spoilage. This preservative is similar to imidazolidinyl urea, as both act by releasing formaldehyde into the formulation. Cosmetic expert panels have determined that Dimethyloldimethyl hydantoin has an excellent safety record for use in both leave-on and washoff cosmetic preparations. Maximum-use concentrations are set at 0.2 percent in the u.S. and 0.6 percent in the european union. Dimethyloldimethyl hydantoin stands for dimethylimidazolidine, though in a listing the acronym is rarely spelled out.
Fungicide, used in paint, pigment, leather, wood, etc. It is an effective antiseptic and antiseptic, mainly used in cosmetics, daily chemicals, paint, leather, plastic, wood, metal cutting fluid, wood discoloration control, Textiles, paper industry, ink, adhesives, etc. This product is a new anti-dandruff, antipruritic, bactericidal and antiseptic. At the same time, this product is low-toxic and non-irritating at the use concentration ( 0.1%).
1,2-Pentanediol is an important organic intermediate for the synthesis of propiconazole, a special fungicide for commercial crops; it also has excellent moisturizing properties and antiseptic effects.
It is used in various skin care products such as skin cream, eye cream, skin lotion, baby care products, sunscreen, etc. It is also an important raw material for the production of polyester fibers, surfactants, pharmaceuticals and other products.
ZIP is used in shampoo to reduce dandruff, which can inhibit the growth of gram-positive and negative bacteria and mold. It can effectively care for the hair, delay the aging of the hair, and control the production of white hair and hair loss. Pyrithione zinc ZPT has a strong killing effect on fungi and bacteria and can effectively kill the fungi that produce dandruff and play a role in anti-dandruff.
Sodium bromide can be used as raw material in the preparation of liquid photographic film; medically as sedative, the brominating agent in printing and dyeing; it can also be used in synthetic fragrances and other chemicals. In addition, it can also be used for organic synthesis and so on.
Polyvinyl alcohol is an excellent water-based adhesive. The general product is flake, granular or flocculent. It is not easilyÃ???Ã?? soluble in cold water. Heating is generally required during dissolution. After being finely pulverized and surface treated, it hasÃ???Ã?? better cold water dissolving performance. But because of its thermoplasticity, pulverization becomes particularly difficult. OurÃ???Ã?? factory adopts a special liquid nitrogen low temperature cooling process to ensure that the powder of the crushed material isÃ???Ã?? uniform. So that the material has excellent water solubility.
Redispersible emulsion powder, commonly known as dry powder adhesive.It has outstanding waterproof performance, good bonding strength, increases the elasticity of mortar and has a long opening time, endows mortar with excellent alkali resistance, improves the adhesion, adhesion, flexural strength, plasticity, wear-resisting performance and construction property of mortar, and has stronger flexibility in flexible crack resistant mortar.
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�??�?�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�??�?�°C, reduced to CoO at 200�??�?�°C, and reduced to cobalt metal at 250�??�?�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
Characteristic.
Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation,
aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine.
As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant.
Application
-Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance.
-Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,
Reddish metal (face-centered cubic); very ductile. It is a good conductor of heat and electricity (next to silver).
Widely used in powder metallurgy, electrical carbon products, diamond tool products, electronic materials, conductive materials, chemical catalysts, pharmaceutical chemicals, filters, radiating tubes and other mechanical and electrical parts and electronic aviation field.
Product name
Copper powder
CAS No
7440-50-8
Size
8~12um
Sublimation
500 degree
Shape
Powder
MW
63.55
Specific gravity
3.597 g/mL at 25 C
Applications
1. Used as a raw material for smelting and electrolyzing copper;
2. Used in powder metallurgy parts, diamond saw blades, friction materials, electrical carbon products and chemical catalyst;
3. It is mainly used to make conductive devices and alloys (bronze, brass, white copper, etc.);
4. Mainly used as raw material for copper smelting industry.
The main function of polyglutamic acid in cosmetics and skin care products is moisturizing agent and skin conditioner. The risk factor is 1, which is relatively safe and can be used at ease. Generally, it has no effect on pregnant women, and polyglutamic acid is not acne-causing. Polyglutamic acid can promote the activity of fiber bud cells and has revitalizing effect. It can be used for anti-aging and anti-wrinkle cosmetics. Larger molecular weight of polyglutamic acid on fiber bud cell activity promotion is not as small molecular weight, but its stable foam, moisturizing ability, adsorption on the hair performance is better than small molecular weight products, used in the hair water, can be antistatic, hair soft 'polyglutamic acid has the effect of whitening skin.
SPT is mainly used for antisepsis and mould proofing in the fields of personal care product (shampoo and hair care products), building coating, adhesive, sealant, pesticide, textile, leatherware, metal processing liquid. It also can used to formulate antiseptics, washing chemical and broad-spectrum dermatological antifungal medicine. Moreover, it is an effective bactericide for fruit trees, peanuts, wheat and vegetables and antiseptics for silkworm use. Therefore, SPT and its like products are widely used in relative fields due to its properties of high efficiency, broad-spectrum and low toxicity.
5510 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
