C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14 CAPACITY: Centers height mm 370 400 400 Swing over bed mm 730 800 800 Swing over cross slide mm 485 540 540 Swing in gap mm 920 1050 1050 Width of bed mm 520 540 540 Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150, centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200 SPINDLE: Spindle bore mm 260 315 230 290 260 310 356 Spindle nose DIN /11 DIN/12 160 210 350 410 470 HEAD STOCK: No. of spindle speeds 12 24 24 18 18 Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315 Main motor power kW 11 (15) 15 (18.5) 15 (18.5) FEEDS: Number of feeds 76 88 88 Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72 Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216 THREADS: Number of threads 64 62 62 Metric thread range mm 0.5 - 150 1 - 240 1 - 240 Inch thread range tpi 60 - 13/64 60 1/4 60 1/4 Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120 DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2 CARRIAGE: Cross slide travel mm 420 420 420 Top slide travel mm 145 200 200 TAIL STOCK: Quill diameter mm 105 110 (120) 110 (120) Quill taper Morse No.6 No.6 No.6 Quill travel mm 200 280 280 NET WEIGHT FOR DBC: 1000 mm Kg 4960 5180 - - 1500 mm Kg 5210 5430 4600 5000 2000 mm Kg 5460 5680 5100 5500 3000 mm (3150 mm) Kg 6300 6520 5700 6100 4000 mm (4400 mm) Kg 6820 7040 6500 6900 5000 mm Kg - 6900 7300 6200 mm Kg - 7900 8300.
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
Press is designed for bending of sheet material. * Operational modes: * Single * Free * Impulse * Body: welded and heat treated steel structure * Hydarulic block * Safety mechanical protection * Photo cell of the working area * Mechanical synchronizer * Mechanized rear limiter * Four-profile tool * Visualizer of carriage travel and rear limiter * El.board with pending control panel Technical information Property Pl 100/31 Pl 100/41 Pl 130/31 Pl 130/41 Maximum bending force(kn) 1000 1000 1300 1300 Reverse stroke force (kn) 160 160 210 210 Carriage stroke Minimum ( mm ) 50 50 50 50 Maxmum ( mm ) 180 180 180 180 Distance from the bending axis to the laterals(mm ) 400 400 400 400 Maximum stroke of the rear stop (mm) 500 500 500 500 Main electric motor power(kw ) 7,5 7,5 11 11 Tank capacity (litres) 160 190 160 190 Overal dimensions : Length(mm) 3800 4800 3800 4800 Width(mm) 2000 2000 2000 2000 Height (mm) 2650 2650 2650 2650 Weight (kg) 9800 11500 12000 14000.
Newsprint paper, printing machines.
Exterior armored and safety doors, interior doors and double faced doors for bathrooms and rooms with high moisture level, kids garments.
Hvac equipment and air cleansing devices.
Copy paper.
U=380v/50hz P=28kva Water cooling Phase regulator Time regulator Leg leading or with higher prices-pneumatics Weight - 56kg Dimensions - 45/50/130cm
Technical Data K5-320 K5-400 Planer Max. Planer Width mm 320 400 Work Table Length mm 1560 1920 Max. Planing Thickness mm 4 4 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Cutter Shaft Dia. mm 86 86 El. Motor Power kW 2.2 3 Thicknesser Max. Planer Width mm 320 400 Work Table Length mm 550 690 Max. Planing Thickness mm 180 220 Max. Planing Heigh mm 3 3 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Feeds m/min 8 8 El. Motor Power kW 2.2 3 Boring Device Table Dimensions mm 400/250 (500) 400/250 (500) Longitudinal Travel mm 100 (150) 100 (150) Cross Travel mm 100 (150) 100 (150) Vertical Travel mm 100 (150) 100 (150) Max. Drill Dia. mm 16 16 Drill Speed R/min 5200 5200 Spindel Moulder Spindle Diameter mm 30 (50) 30 (50) Spindle Speed R/min. 6000 6000 Vertical Stroke of Spindle mm 130 130 Max.Ttool Diameter mm 170 170 Dimensions Of Worktable mm 850 / 450 850 / 450 El. Motor Power kW 2.2 2.2 Circular Saw Saw Blade Diameter mm 300 300 Saw Blade Speed R/min. 3700 3700 Max. Depth Of Cut mm 85 85 Dimensions Of Worktable mm 850 / 450 850 / 450 Spindle Dia. mm 30 30 El. Motor Power kW 2.2 2.2 or 3 Tenoning carriage Dimensions of worktable mm 450/750 450/750 Machine dimensions Net weight of the machine Kg 540 580 Length mm 1600 2000 Width mm 1140 1700 Height mm 1000 1100
Circular saws Cutters Cutter heads Shank cutters And many others by customer’s request.
Technical data OL 220 DG OL 222 DG OL 220 DGH OL 220 DGA Type Saw-frame rotation range – left/right Manual 45° - 30° Manual 45° - 30° Semi-automatic 45° - 30° Automatic 45° - 30° Maximum cut off stock Cutting at angle 90° mm 240 240 240 240 mm 220 220 220 220 mm 275x200 275x200 275x200 250x200 Cutting at angle 45° mm 200 200 200 200 mm 175 175 175 175 mm 190x120 190x120 190x120 190x120 Cutting at angle 30° mm 130 130 130 130 mm 125 125 125 125 mm 130x80 130x80 130x180 130x80 Material level mm 960 960 960 950 Minimum rest in automatic mode mm x x x 380 Sawing speed m/min 30 / 60 30 / 60 30 / 60 (15 – 70) 30 / 60 (15 – 70) Saw blade dimensions mm 2940x27x0.9 2940x27x0.9 2940x27x0.9 2940x27x0.9 Stock feeding: single mm x x x 500 repeatedly mm x x x 1000 Power of: main motor kW 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 (2.2) 1.1 / 1.5 (2.2) cooling motor kW 0.18 0.18 0.18 0.18 hydraulic motor kW x x 0.25 0.75 brush kW x x x 0.09 Capacity of: hydraulic l 1.5 1.5 6 15 cooling l 15 15 15 15 Overall dimensions (LxWxH): mm 1500x800x1600 1500x800x1600 1500x800x1600 1500x2400x1600 Net weight kg 475 475 500 1200
Turning tools with indexable carbide inserts Cutters with indexable carbide inserts. Drills with indexable carbide tools High speed steel blanks for lathe tools. Toolholders, collets and tips Live and dead centers for lathes. Reduction sleeves Circular saws, hand- and power hacksaw blades. Multidisk "SIGMA" clutches and brakes . And many others by customer’s request.
Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401 Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600 “T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18 Table swivel – left and right (º) 45 45 45 45 45 Longitudinal table travel - manual mm 820 950 1000 (1250)* 1150 (1250)* 1250 - automatic mm 800 930 980 (1230)* 1130 (1230)* 1230 Cross table travel - manual mm 280 320 360 360 360 - automatic mm 260 300 340 340 340 Vertical table travel - manual mm 410 410 460 460 460 - automatic mm 390 390 440 440 440 Max. Distance from table top to spindle axis mm 440 440 490 490 490 Spindle nose taper ISO 40 40 50 50 50 Number of spindle speeds 18 18 18 18 18 Spindle speed range rpm 40-2000 (50-2500)* 40-2000 (50-2500)* 32-1600 (40-2000)* 32-1600 (40-2000)* 32-1600 (40-2000)* Number of table feeds 18 18 18 18 18 Table feed rate - x,y mm/min 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** - z mm/min 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040 Main motor power kW 4 5.5 7.5 7.5 7.5 Feed motor power kW 1.5 1.5 2.2 2.2 2.2 Machine weight kg 1975 2025 2850 2900 2925 * - option Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds
General purpose on copy-milling operations in materials of medium to high tensile strength such as steels up to 1300N/mm, cast iron, aluminum, copper and non-ferrous metals.
Machinery.
Performance car products.
Oxyfuel and plazma cutting machines.
Agricultural machinery.
Electrocontact spot, butt end seam welding machines.
