Brazilian Electronic Scales Suppliers and Manufacturers

Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Rated output 2.0 ± 5% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal

Detailed Product Description Weighing Controller IN-420 Interchangeable With ATRAX 420 PLUS INDICATOR RS485/RS232 signal output with Modbus rtu available 2 RELAYS(Optional) Free PC software with programable for all function Special Function Fast speed High accuracy Weight Controller Function: � Auto zero scale � Auto zero tracking � Normal weighing � Peak � Counting � Zero scale � Gross/Net � Tare � RS-232C � RS-485 � Print interface (PS805 Printer) Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles per second and drives up to eight 350Ω or sixteen 700Ω load cells. With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000. COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000 COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000 Material: Stainless steel SS304 IP Rating: IP66 LED 6-digit display Power Supply: AC adaptor, 100-240VAC, 50-60Hz Parameter and calibration settings are performed on the front panel LABRADOR computer software for parameter and calibration settings Units of Measurement: kg, lb Improper operation and fault indication Two way relay signal output Equipped with RS-232 and RS-485 connecting ports Print functions with programmable print format Built-in clock Weight Controlloer Data Enclosure MaterialStainless steel SS304 Units of Measurementkg, lb Working Humidity�90% RH Working Temperature-10°C to 40°C/14°F to 104°F Dimensions (mm)226mm x 71mm x 161mm Dimensions (in)8.9in x 3.7in x 6.34in Display TypeLCD Display Digits6 digits Digit Height25.4mm/1in Display Dimensions143mm x 41mm/5.6in x 1.6in Power SupplyAC adaptor, 100-240VAC, 50-60Hz IP Rating IP66 Division1, 2, 5, 10 Tare Range100% of Cn Maximum Number of Load Cells8350Ω or 16700Ω Maximum Power Consumption6VA Excitation Voltage5VDC ± 5% Fusible Link Fuse (slow blow)1A Communications InterfaceRS-232C, RS-485 Print InterfaceSerial interfacr

Detailed Product Description Categories canister and compression load cell Model IN-RC3 Pattern Column Cylinder Type Transform Type Resistance Strain Out-Wire 4-Wire Output Signal Type Analog Type Material Stainless Steel/Alloy Steel Capacity 5T, 10T, 20T, 30T IP Rating IP68 Application Truck Scale Accuracy OIML C2 C3 FOB port SHANGHAI Terms of Payment L/C

Detailed Product Description 0.1G High precision Batching Controller - BS-50000-------------Accuracy up to 0.1g batching scale controller Batching Controller Advantages * Accuracy up to 0.1g --- Can auto calibrate the close time of valve according to batching speed to reach high precision * Output port function for site programming * Can be widely applied to chemical, building materials, food, feed and other industries quantitative packaging or multi-material automatic batching system. * Super strong communication function, so that the host computer can easily and reliably send a variety of ingredients to a number of controllers, or from a variety of controllers to read a variety of data to form a large-scale batching system. Batching Controller Function *Auto zero tracking *Panel digital calibration, capacity, division value, decimal point, overload value, zero range all can be set by panel digital *Formula table and material table both can be programmed by keyboard and host computer Can store 10 kinds of formula and material table of 10 kinds of materials *Add in weigh & loss in weigh optional * Can set continuous batching times * Overshoot value auto modify, jog feeding * With 4-way programmable switch value input * With 4-way programmable switch value output * Gross weight, net weight, tolerance display optional when batching * Manual discharge, feeding optional * With WATCH DOG circuit * With RS232C and RS485 serial communication interface, baud rate optional, can set the communication address for multi-machine communication * Can do various operations by panel keyboard, switching output or host computer communication * Built-in load cell bridge power supply * With alarm like overload, underload, over tolerance, material blocking and other working state prompt

Detailed Product Description Touching electrostatic eliminator also named human body electrostatic eliminator. With the rapid development of industrial economy, more and more appear particularly important to eliminate static electricity. The human body electrostatic eliminator which adopts a passive circuit, the circuit works by electrostatic human body, finally to eliminate the electrostatic effect. Its features are: small size, light weight. Without power supply. Convenient installation. The characteristics of static elimination without feeling. Touching type electrostatic eliminator, the appearance is made of stainless steel tube and the ball is made of stainless steel, which is suitable for chemical industry, metallurgy, military, oil, fireworks, computer room, high-grade hotels,hotel, office and other inflammable and explosive places. The circuit principle and the other is basically the same, it is the biggest characteristic of energy at the temperature of -50~100 â?? normal work. Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Technical indicators 1). The human body electrostatic voltage: V 20KV 2). Static release time: t 100mS 3). The maximum release current: I 0.1mA 4) the environment temperature: 20 5). Environmental humidity: 80% (40) Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Test conditions and results The human body electrostatic voltage: 18KV environment temperature: 20 â?? The five fingers release time + 0.091s residual voltage -10V The five fingers release time - 0.090s residual voltage -10V Palm release time + 0.084s residual voltage -9V Palm release time - 0.082s residual voltage -9V Electrostatic elimination time conforms to the ESD standard The use and installation methods: just a finger touch the metal ball 0.1s can eliminate the static electricity of the human body. The base type electrostatic elimination ball: first through a screw nut screw at the bottom of the tube on the stainless steel wire, grounding wire with the best of not less than 0.3 square multi strand wires to the ground. No base type electrostatic eliminating ball: the ball electrostatic eliminator ahead buried underground needs at least 400mm, a header body upward, thus completed the installation. Maintenance: Do not enter the debris inside the steel tube, especially metal objects, because there are the original circuit, if the metal circuit does not work.

Detailed product description Antistatic tooth brush esd brush, antistatic brush, cleaning brush Antistatic tooth brush esd brush, antistatic brush, cleaning brush species: 1 anti-static brushes according to shape can be divided into: Brush type (also known as crank type), paint brush type, u type, abnormalfour. 2 according to the brush hair softness can be divided into: Hard hair, fur two. According to materials can be divided into 3: Pp plastic handle with pa nylon bristles; Wooden handle with animal hair. Plastic anti-static brushes that Antistatic toothbrush brush on the market can be divided into: large, medium and small, suitable for cleaning of various electronic components, pcb board, pcb board also can brush. Paint brush brush can be divided into: round handle, straight handle two kinds, each with size, suitable for cleaning of various electronic components, pcb board. U type brush is also divided into large, medium and small, suitable for cleaningof various electronic components, pcb board, pcb board also can brush. Special brush for some processes for aluminum alloy special design, such asplastic printing production of anti-static brush. How to choose: The brush hair anti-static brushes of the soft and hard choice, should be based on the components in the pcb board to clear requirements to be, afraid of being scratched by selecting suitable soft brush, but the effect of cleaningbristle brush dominant.

A complete instrument to make pH measurements at water and solutions. Auto balanced for compensate the temperature. Microprocessed with a friendly software to calibrate and measure. Follow standard solutions (pH = 4,0 and 7,0) electrode for pH in water and temperature sensor. A box with 400 mm x 450 mm x 350 mm protect against mecanic shock by poliuretane foam case inside the box.

Microprocessed instrument with friendly software to calibrate and make turbidity measurements. Follow turbidity standards with 6 (six) cells. A box with 450 mm x 400 mm x 350 mm dimension. Protected with poliuretane foam case inside. Weight 10.0 pounds.

Microprocessed instrument to make conductivity measurements with a friendly software. Auto temperature compensation. Follow a 500 ml of conductivity standard to calibrate the instrument, the conductivity platinum cell index 1.0 and the temperature sensor. A box with 450 mm x 400 mm x 350 mm dimension. Protected with a poliuretane foam device inside the box. Total weight 10.0 pounds.

UVA MESA DOCE . PRODUÃ??Ã??O ANO TODO. CX 10 DISPLAY 500G 5531 985751097 5531 991553059 vittafoodsbr@gmail.com

Digital bioimpedance balance .

Electronics.

Electronics.

Electronics.

Electronics.

Electronics.

Electronics.

Electronic transformers, electronic ballasts, dimmers, relays.

Programmable logic controler