Manley transformers with nickel laminations in mu-metal cases
2 Kohm mic input z with high current 48v phantom power built-in
Hi-Z (100K) direct instrument input
Line & insert inputs (balanced XLR & ¼")
Preamp & eq outputs lo-Z (50w)
Transformer balanced XLR outputs
Transformerless unbalanced ¼" outputs
Stereo link for compressor & de-esser/limiter
Side chain monitor for de-esser
Large illuminated sifam meter with five readout modes
SPECIFICATIONS
VOXBOX Combo
Mic Pre
Frequency response: ±1dB 20Hz-60KHz
Noise Floor (A-weight): -86dB
Signal to Noise Ratio: 113dB
Tube complement: 12AX7LPS and 6414
Gain: 40 to 60dB
EQ
Frequency response: 10Hz - 100KHz
Noise Floor (A-weight); -89dB
Signal to Noise Ratio: 116dB
Tube complement: 5751 and 6414
Gain: unity
Compressor
Ratio: 3:1
Maximum Reduction: 16dB
Attack Times: 4mS to 70mS
Release Times: .3, .5, 1, 2, 5 Sec
De-esser & Limiter
Ratio: 10:1
Maximum Reduction: 32dB
Attack Times: 2mS
Release Times: .5 Sec
De-Ess Notch Frequencies: 3, 6, 9, 12KHz, none (LIMIT)
General Info:
THD + N (1KHz +20dBu): 0.3%
Maximum output: +31dBu
Power Consumption: 24W
Mains Voltage Frequency: 50 ˜ 60Hz
Dimensions: 19" x 5.25" x 10" (occupies 3U)
Shipping weight: 21lb.
The No 533H shares the same basic amplifier module as the No 531H and No532H but is a semi-monoblock design. With power supplies that can be shared across multiple channels, this design lends itself well to multi-channel environments where one channel might need more power at times than others. All other features of the No 533H are identical to the No 531H and No532H and the common design creates a consistent sonic signature for use in multiple amplifier system configurations.
SPECIFICATIONS
Inputs one balanced XLR input per channel; one unbalanced RCA input per channel
Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)
Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at <0.5% THD)
Frequency Response within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms
Input Sensitivity 2.83Vrms output at 130mVrms input
Gain 26.8dB
Input Impedance 60 kO (balanced); 30 kO (unbalanced)
Power Requirements 100V~, 120V~, 230V~, factory set for destination country;
Power Consumption 900W
Height (with feet): 7.65? (19.4cm); (without feet): 6.97? (17.7cm)
Width 17.75? (45.1cm)
Depth 19.83? (50.4cm)
Weight Net Weight: 90.0 lbs (40.8kg) Shipping weight: 100.0 lbs (45.4kg)
The power amplifier platform of the PLM 20000Q integrates several new developments to maintain reliable, sustained output at unprecedented power levels. The Regulated Switch Mode Power Supply (R.SMPS) is a new universal design that connects to any mains supply in the world. (Operating range is 100 V - 265 V, but new Under Voltage Limiting extends operation down to 65 V with reduced output power.) The design also incorporates power factor correction (PFC) to reduce peak current draw from the mains.
Tech Spec:-
5000 W per channel 2.2 – 3.3 ohms
4400 W per channel 4 ohms
2U chassis weighing only 17 kg (37 lbs)
Class TD® output stage
Universal (70 - 265 V) Regulated Switch Mode Power Supply (R.SMPS )works anywhere in the world
Power factor correction (PFC) helps maintain full output during extended power bursts
Copper-finned Intercooler with transverse-mounted output devices
Comprehensive loudspeaker preset database
LoadSmart load verification and SpeakerSafe™ continuousloudspeakerperformance monitoring
Dante low-latency digital network included as standard
Compatible with Lake LM 26, Dolby® Lake Processor and other legacy Lake devices
Primary and secondary network connections
Digitally controlled “amplifier gain” adjustable in 0.1 dB steps
Digital output attenuation in 0.25 dB steps from -inf to 0 dB
Binding post or Neutrik® speakON® output connectors
Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL™) adjustable in 0.1 V steps from 17.8 to 194 V
Power Average Limiter (PAL) with software-controlled Breaker Emulation Limiter (BEL) prevents mains fuse tripping
Under-Voltage Limiting (UVL) enables continued operation with mainsvoltage sags as low as 65 V
High-brightness front-panel LCD display
Moisture resistant silicone touchpad
Dolby Lake Processor Model LP4D12 4in 12out Loudspeaker Management
Description:
Dolby Lake Processor Model LP4D12 4in 12out Loudspeaker Management Today up for sale I have a Dolby Lake Processor Model LP4D12 4in 12out Loudspeaker Management. This unit is loaded with 1 x XLR 4 channel Input card and 3 x XLR 4 channel Output cards.
The Dolby Lake Processor marked the next generation in digital loudspeaker and equalization technology. With unsurpassed audio quality and the most advanced loudspeaker processing available, it will improve the sound of any system. Effortless control is provided through the Dolby Lake Controller software, or the exclusive front-panel Portal metering and control interface.
The Processor platform offers complete, native-digital signal processing functionality, with support for up to 4-in, 12-out loudspeaker applications and 8 in, 8-out EQ applications. The signal processing can also be changed to provide an EQ 4×4 configuration together with a loudspeaker 2×6 configuration.
The Processor includes several advanced technologies for improving sound quality. These include Raised Cosine Equalization (the foundation underlying the Ideal Graphic EQ and Lake Mesa EQ interfaces), plus linear phase crossovers, LimiterMax loudspeaker protection, and Iso-Float ground isolation.
4495 Books Magazines Music Entertainment Suppliers
Short on time? Let Books Magazines Music Entertainment sellers contact you.
This microphone is working perfectly,is with it complete accessories and it was only used 10 times for rentage and its in good condition and still with user warranty
Finest Quality Scottish Kilt. Comes in 5 & 8 yard. Made of tartan. Comes with two buckles for perfect fitting. Available waist size are 28" to 44" Customers custom design facility available. We can produce kilt in any design & tartan.
Each piece is individually packed in a poly bag. 25 pieces master cartoon.
Guitar Pickguard Made of Rosewood better than plastic
condition: New
Made of High Quality Wood Better then Plastic
Beautiful and Functional
CNC cut for Accuracy
Hand Finished
Fits most Stratocaster style electric guitar
Perfect for working on a Guitar project
khalifart offers the Arabic Oud, Lute, Sarangi, Rubbab, Theorbo Large Lute, Knob Tipper, Psaltery, Guitars and many more on the best competitive pricing with the best quality.
