We can supply Zinc Ore with almost 75% of Zinc concentration.
Iron oxides are widely used as inexpensive, durable pigments in paints, coatings and colored concretes. Product Origin : Merco W.L.L Bahrain Actual Chemical Analysis Results : Actual results tested by a competent laboratory on sample taken at load port with the following findings Specifications Results Fe 66.40 PCT FeO 13.12 PCT Sio2 2.79 PCT CaO 1.27PCT Al2O3 0.49 PCT P 0..32 PCT S 0.035 PCT CaO : Sio2 0.46 Moisture 0.12 PCT Size 0-3 MM 37.20 PCT 3-5MM 26.60 PCT 5-10MM 36.20 PCT
Aluminium ingots, zinc.General trading
Iron ore, pellet, alumina, petrochemical.
Copper ore, lead ore, zinc ore, barite, barium sulphate.
Trading, in commodities, agro products, petrochemical , meat and scrap metals of iron, copper , hms, dri, hbi, iron ore, zinc ,and mineral natural and industrial..Sourcing
Titanium dioxide, zinc, copper, tin.
Mill Scale is a waste material rich in iron mostly produced in steel plants. Price of Product (USD) : 65 Product Origin : Merco W.L.L Bahrain Chemical Analyses Parameters Results Total Iron (T.Fe) 70.81% Silica (Sio2) 0.52% Calcium Oxide (c2O) 0.69% Alumina (Al2O3) 0.51% Phosphorus (P) 0.0094% Sulphur (S) 0.009% Manganese (Mn) 0.89% Chromium (Cr) 0.015% Zinc (ZN)- 0.16% Titanium (Ti)- 0.065% Moisture(H2O)- 2.17% Minimum Order size and packgaing detail : loose paking with polythene sheets.
We can barite sulfate lumps for both chemical and drilling grades as shown below: Type A: BaSo4: 92.84 - Specific Gravity: 4.4 (g/cm3) Type B: BaSo4: 82.99 - Specific Gravity: 4.22 (g/cm3) Type C: BaSo4: 88.73.84 - Specific Gravity: 4.34 (g/cm3) Type D: BaSo4: 86.63.84 - Specific Gravity: 4.28 (g/cm3)
We can supply copper Ore with 25% and above of Copper concentration.
Cryolite by difference is above 75%
Test Parameters Method Unit Result Color Density 76.5 Flash
Bitumen 60/70 shall be 50 % and Kerosine 50% Packed in Flexi Tank
Grog Or Refracory Bricks Are Available From Bahrain, 500 Tons Every Month
Test Parameters Method Unit Result Color Light Yellow Density 0.777 Approx Flash
Test Parameters Method Unit Result Color White Density 0.67 Flash
Test Parameters Method Unit Result Color Water white Density 76.5 Flash
Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion. Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Uses Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. b) Lower costs are incurred due to a considerable saving on fuel for heating purposes. c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil. d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply. Price of Product (USD) : 432 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Type Viscosity @25°C Penetration & Solubility Residue Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38% Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50% Rapid Setting K1-60 -NA & (97.5) 57% Rapid Setting CRS-160- 200 & (97.5) 60% Rapid Setting CRS-2-60- 200 & (97.5) 65% Rapid Setting K1-70NA & (97.5) 67% Medium Setting K2-NA & (97.5)57% Medium Settng CMS 2-60- 200 & (97.5) 65% Slow Setting K3 20- 100 60- 200 & (97.5) 56% Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57% Minimum Order size and packgaing detail 16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80
Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ... of the process is to drive off the oxygen contained in various forms of iron ore. Price of product ( USD price or FOB price) : 300 Product origin : Kingdom Of Bahrain Key Specifications/Special Features : Al2O3+SiO2 5.90%Max Mgo + CaO 2.00% Max Phosphorous 0.07% Max Sulfur 0.01 Max Minimum Order Size and Packgaing details : MOQ: 1000MT To Max 10000 MT Packaging: Loose In Continers
Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius. Price of Product (USD) : 503 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Test Name Test Method Unit Result Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06 Penetration @25°C ASTM D5 mm/10 60/70 Softening Point °C ASTM D36 °C 49/56 Ductility @25°C ASTM D113 cm 100 min Loss on Heating (wt%) ASTM D6 wt% 0.2 max Drop in Penetration after heating % ASTM D5-D6 % 20 max Flash Point °C ASTM D92 °C 232 min Solubility in Trichlorethylene ASTM D2042 wt% 99 min Spot Test A.A.S.H.O.T102 Negative Minimum Order size and packgaing detail we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes Drum Size 200 kg Drum Height 980mm Diameter 520 550mm Thickness 0.6 –0.8mm
