Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ... of the process is to drive off the oxygen contained in various forms of iron ore. Price of product ( USD price or FOB price) : 300 Product origin : Kingdom Of Bahrain Key Specifications/Special Features : Al2O3+SiO2 5.90%Max Mgo + CaO 2.00% Max Phosphorous 0.07% Max Sulfur 0.01 Max Minimum Order Size and Packgaing details : MOQ: 1000MT To Max 10000 MT Packaging: Loose In Continers
Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius. Price of Product (USD) : 503 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Test Name Test Method Unit Result Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06 Penetration @25°C ASTM D5 mm/10 60/70 Softening Point °C ASTM D36 °C 49/56 Ductility @25°C ASTM D113 cm 100 min Loss on Heating (wt%) ASTM D6 wt% 0.2 max Drop in Penetration after heating % ASTM D5-D6 % 20 max Flash Point °C ASTM D92 °C 232 min Solubility in Trichlorethylene ASTM D2042 wt% 99 min Spot Test A.A.S.H.O.T102 Negative Minimum Order size and packgaing detail we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes Drum Size 200 kg Drum Height 980mm Diameter 520 550mm Thickness 0.6 –0.8mm
Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen. The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied. Application Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their Price of Product (USD) : 503 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Cutback Classification Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback. Grades & Properties Grade Curing Speed Viscosity Penetration of Residue MC 30 Medium 30-60 120- 150 MC 70 Medium 70-140 120- 150 MC 250 Medium 250- 500 120- 150 MC 800 Medium 800- 1600 120- 150 MC 3000 Medium 3000- 6000 120- 150 RC 70 Rapid 70-140 80- 120 RC 250 Rapid 250-500 80- 120 RC 800 Rapid 800- 1600 80- 120 RC 3000 Rapid 3000- 6000 80- 120 Minimum Order size and packgaing detail Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.
Iron oxides are widely used as inexpensive, durable pigments in paints, coatings and colored concretes. Product Origin : Merco W.L.L Bahrain Actual Chemical Analysis Results : Actual results tested by a competent laboratory on sample taken at load port with the following findings Specifications Results Fe 66.40 PCT FeO 13.12 PCT Sio2 2.79 PCT CaO 1.27PCT Al2O3 0.49 PCT P 0..32 PCT S 0.035 PCT CaO : Sio2 0.46 Moisture 0.12 PCT Size 0-3 MM 37.20 PCT 3-5MM 26.60 PCT 5-10MM 36.20 PCT
Information on basic physical and chemical properties a) AppearanceLight yellow formed solid b) OdourFaint but characteristic rotten egg c) Odour Threshold0.47ppb hydrogen sulphide d) pHNot applicable e) Melting point/freezing point118-120°C f) Initial boiling point and boiling range-444.7°C g) Flash point168-207°C (molten sulfur) h) Evaporation rateNo data available. i) Flammability (solid, gas)Combustible solid j) Upper/lower flammability or explosive limitsUpper explosion limit 35g/m3 % sulfur dust in air Lower explosion limit 1400g/m3 % sulfur dust in air k) Vapour pressureNot applicable l) Vapour densityNot applicable m) Relative density1.92-2.07 n) Water solubilityInsoluble in water o) Partition coefficient: (n- octanol/water)No data available p) Auto-ignition temperature 248-161°C (molten sulfur), 190°C (sulfur dust cloud) q) Decomposition temperatureNo data available r) Viscosity 8 mm2/s at 140°C (molten sulfur) s) Explosive properties None NONE t) Oxidizing properties None NONE Price of Product (USD) : 67 Product Origin : Merco W.L.L Bahrain
Anode butts are the residual electrode left in the electrode holder at the end of electrolysis with prebaked carbon anodes. The anode carbon is being consumed by ohmic resistive heat and electrolytic oxidation. However the part of anode just above the melt is being continuously subjected to high temperature reactions with fluoride melt and atmospheric oxidation, which ultimately results in impurities left in the discarded anode butts.At the end of their use, the left over part of the anode (called butts) are crushed and recycled to produce new anodes. However, while recycling the butts the built-up of sodium concentration is closely checked and controlled in order to avoid harmful effect of excess sodium in newly formed anodes. Good quality anodes should be oxidation resistant in gaseous environment in order to minimize oxidation on the expose surface (C + O2 2CO) [19] Price of Product (USD) : 300 Product Origin : MERCO W.L.L BAHRAIN
contact us for more details
We can barite sulfate lumps for both chemical and drilling grades as shown below: Type A: BaSo4: 92.84 - Specific Gravity: 4.4 (g/cm3) Type B: BaSo4: 82.99 - Specific Gravity: 4.22 (g/cm3) Type C: BaSo4: 88.73.84 - Specific Gravity: 4.34 (g/cm3) Type D: BaSo4: 86.63.84 - Specific Gravity: 4.28 (g/cm3)
We can supply copper Ore with 25% and above of Copper concentration.
We can supply Zinc Ore with almost 75% of Zinc concentration.
BAUXITE: (Au 1.00 gr/ton) (Ag 453.00 gr/ton) (Al2O3 45.22%) ( Cl 16.72%) (SiO3 8.94%) (FeO2 7.17%) (CaO 6.27%) (MnO 0.81%) (CuO 3.30%) (K2O 6.05%) (Pbo 0.11%) (SrO 0.29%) (ZnO 1.24%) (TiO3 1.29%) (AsO3 0.01%)
The standard Cornerboard is manufactured by laminating several layers of strong paperboard into a rigid right angle. Our packaging solution with cornerboard. * Replaces expensive packaging material. * Saves work and material. * Is environmentally friendly. * Is suitable for food packaging and can be sent all over the world without any need of extra treatment, such as the fumigation required for wooden material. * Allows optimise transportation space by multiple - stacking * Strengthens package and minimizes transport damage.
The flexible wrap around corner board is easy to use for inside or outside protection of reels/rolls.
Products like bitumen 60/70, cut back bitumen, furnace oil, waste oil, fuel oil.
Bitumen, fuel oil, jet oil, gasoil, crude oil, petroleum products.
All paper products like kraft liner board, colored board, fluting tl xtr, steel slag mill scale.
Hydraulic pneumatic, PLC & CNC machineries equipments, cranes.
Brass inserts for pvc, cpvc and upvc fittings, hose connectors, couplings, metal hubs, cable glands.
Tyres, lubricants and batteries and new and used cars.
Bitumen4. oxidized bitumen, d 41 bitumen primer, solvents., and others like carbon anodes, oxide pellet fines, mill scale, refractory bricks, sulphur, rubber items and rubber solvent..Shipping
