Natural spring bottle water.Manufacture
Mineral water.
Nonalcoholic soft drinks, bottled lemonades, sparkling water.
Confectionery, export, chocolate, candies, fmcg.
Juice bottles, and water bottles, and more..
Condensed milk, hazelnut kernels, drink water, lemonades.
Food, meat, agriculter products, mineral waters and Etc..
Meat, meat products, water, fruit and vegetables, wood, juice.
1.CALCIUM CHLORIDE/CaCl2 APPLICATION Calcium Chloride/CaCl2 is widely used in snow & ice melting,oil & gas drilling,moisture-absorbing,Mutli-use Dryer, Dehydration agent,cryogen,removing agent,dust collecting agent,polycoagulant,refrigeration,Buiding antifreeze, rubber and petroleum industries. 2.BRIEF SPECIFICATION OF CALCIUM CHLORIDE/CaCl2 Content of CaCl2 94.53% PH 8.0 Nacl 3.10% Mgcl2 0.12% Ca(OH)2 0.10% Water Insoluble 0.10% Heavy Mental(as Pb) conforms Arsenic conforms specification flakes,powder,granuler,pellet,ball
SVEZA Deck 350 is a special film faced plywood with a grid pattern intended for slab formwork. It comes with 25, 50, and 100 mm grid patterns. These types of lines simplify plywood marking and cutting, as well as rebar placement. This allows to reduce labor costs at the construction site. Production process of plywood with layout grid is patented.* SVEZA Deck 350 is a high-strength plywood made of 100% birch veneer, all layeers are smooth, without cavities inside. Its edges are coated with special acrylate-based waterborne paint with low water permeability. SVEZA Deck 350 surface is smooth, and coated with wear resistant film (wearing capacity is 350 Taber test rotations). * Registered in the State Register of Utility Models RF 01.20.15, RF patent number 150519. Standard sizes: 1220 2440 8mm 1250x2500x18mm 1250x2500x21mm
Naphthenic acids, imidazoline, corrosion inhibitors, additives driers, demulsifiers, fruits like apple and vegetables.
Fruit juices like peach and orange juices, mineral water, lemonade.
Rose damascena essential oils, lavander augustofolia essential oils, peppermint essential oils, wormwood essential oils, dry rose petals, rose water, rose hydrosol, peppermint hydrosol, lavender water, lavender hydrosol, dry lavender petals..
Water-dispersing acryl filler. It is used for elimination of surface defects and levelling for further painting. Filler is highly durable, dries fast, has no odour, soluble in water and good sanding properties. Expenditure: 0,5-1,0 kg per 1m2. Drying time: 4-8 hours at 200C.
For external and internal painting works. It is designed for painting of buildings and facilities and for interior painting, is weather-resistant, water-resistant, wear-proof and ecologically clean. White coloured, coloured into different shades as per client’s requirements. Solvent: water. Expenditure: 1kg per 2-3 m2.
Is designed for interior works in dry locations, is highly economical and ecologically clean and highly wear-resistant. Solvent: water. Expenditure: 0,15 kg per 1m2. Drying time: 2 hours at 200C
Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent: Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C
Designed for protective and decorative finish of external faces of buildings and facilities with stone porous surface. Protect from contamination and preserve initial natural state of stones. It may require tinting with coloured pigment paste. Solvent: water. Expenditure: 1 kg per 6-8 m2. Drying time: hour at 200C.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 0.9-1.2 mm Item: dip Certification: iso9001 Color: black Standard: ohsas 18001 Specification: as your requirement Od: 12-20 mm Length: 36-40 mm (length of drip component) Drip flow rate: 1.5-4.0 (liter/hour) Distance between drip components: 190-1050 Packaging & delivery: Depends on your order. Description: After cleaning the mixture from sand, clay, water and algae, etc. With the help of special filters, water is transferred in drops directly to the roots of plants through drop irrigation pipes. Drip irrigation pipes can be used in any landscape terrain. Applicaton of this system allows automation of overall irrigation system, which in its turn facilitates to reduce the use of work force. Contrary to surface irrigation method, drip irrigation increases the efficiency factor higher than 95%. Application of drop irrigation components has several positive aspects: • Enables the fertilizer to penetrate with water • Enables maximum equal distribution of water and nutrients • Allows irrigating large territories simultaneously in small portions • As the ground between plants is dry, it prevents the grow of weeds that helps to facilitate pest control. • High pressure is not required in drip irrigation that reduces operating expenses.
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
