Size: 11-13mm, 13-15mm+ Humidity of kernels - atletiko b 103c: 6, 0 %; Broken with mechanical damages: 0, 5 %; Shrunken, underdeveloped: 1, 0 %; Rancid, mustiness: 1, 0 %; Dockage with nutshell and with a touch: 0, 2 %; Ph û value: 6, 2; Fattiness: 45-68%; Proteins: 16-22 %; Ash content: 2, 5 %; Cadmium: max. 50mg/kg Lead: max.500mg/kg In jute sacks per 40-50 kg
Application Solvent Applications, Chemical Intermediates, Pharmaceuticals, Acetone Feature IPA is produced by the direct propylene hydration process. IPA meets the diverse needs from solvent industry. Our division has been a stable supplier of raw materials for related industries. IPA is used for cleaning semiconductor wafer and LCDs. This highly value-added product has been enjoying rapid increase in demand in accordance with the development of such areas as information, communication and multimedia. High Purity We have high performance purification process to manufacture high purity IPA products. Our IPA maintains superior quality characteristics through products of high purity.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; a stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; An oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products. General Specifications: Installed power of the lines: 14 kW Rolling speed: from 8 to 12 lin m/min Accuracy of rolling along the length: ± 2 mm per 6 m Quantity of reduction mills: from 14 to 17 pieces Lifting capacity of the uncoiling machine: 7 tons (10 tons) Attendants: 1 person Maximum overall dimensions of the used roll: Width: 1,250 mm; Outer diameter: 1,600 mm; Inside diameter: 500…600 mm. Receiving stacker length: 6 m Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm. Working temperature range for equipment operation: from +2 to +40 o
It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds. Main functions of a glass pane: natural lighting, thermal and noise insulation. Glass panes are categorized by manufacturing process: standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing. Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology. As defined in GOST 24866, glass pane are categorized as follows: by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on. by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm By glass type: regular energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type) noise-resistant triplex sun-screening tinted or film-coated glass shutterproof glass with a high protection class.
River sand, screenings, sheben, gravel, clinker .
Specialized news letters, analytical reports and monitoring products.
