Miniature car engine oils Heavy-duty truck engine oils Transmission and gear oils Technical lubricants Industrial oils Greases Marine oils
Miniature car engine oils, heavy duty truck engine oils, transmission and gear oils, technical lubricants industrial oils, greases, marine oils.
Specifications: API GL-5 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
Approvals: MB-Approval 229.51 Meets the requirements of: BMW LL-04 GM DEXOS 2 RN0700/0710 MB 229.51/31/226.5 Specifications: API SN/CF ACEA C2/C3 TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.
Meets the requirements of: GM DEXOS1 GEN2 Specifications: API SN ILSAC GF-5 TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.
Meets the requirements: MB 229.1/229.3 VW 502.00/505.00 PSA B71 2300 RN 0700/0710 Specifications: API SN/CF ACEA A3/B4 Packaging: 1 L plastic 12 units / case 4 L plastic 4 units / case 5 L plastic 4 units / case 208 L drum - TECHNOL GOLD 10W-40 is a synthetic technology engine oil that has been developed to cover the most stringent requirements of engines of both gasoline and diesel passenger vehicles. Satisfying rigorous standards by vehicle manufacturers, this engine oil provides resistance to oxidation with its high quality base oils and additives, ensures good engine cleanliness, reducing particle accumulation through efficient dispersant power, and long-term wear protection of parts, increasing engine life.
Specifications: API SJ/CF Packaging: 1 L plastic container 12 units / case 4 L plastic container 4 units / case 5 L plastic container 4 units / case 208 L drum - TECHNOL SILVER 15W-40 has been developed to fulfill the most stringent requirements of both gasoline and diesel engines of passenger and light commercial vehicles. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. Thanks to its antioxidant, antirust, antifoaming, antiwear and anticorrosion properties, this engine oil provides resistance to oxidation and ensures good engine cleanliness. It has viscosity stability and can be used under all operating conditions in all seasons.
Specifications: API SG/CD Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.
Meets the requirements of: MB 228.1 MAN 3275 Volvo VDS-3 Deutz DQC III CAT ECF-1a Cummins CES 20077 Mack EO-N MTU 2.0 Renault RLD-2 JASO DH-1 Specifications: API CH-4/SJ ACEA E7-2016 TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.
Meets the requirements of: Cummins CES 20081 MB 228.31/228.51 MAN M3677/3477/3575/3271-1 Volvo VDS-4 RVI RLD-3/RLD-2 JASO DH-2 MACK EO-N Premium Plus MACK EO-O Premium Plus CAT ECF-3 Detroit Diesel 93K218 MTU Oil Category 3.1/2.1 Deutz DQC-IV-10 LA Scania LA Scania LDF-4 Voith Class B / MB 235.28 Specifications: API CJ-4 ACEA 2016 E4/E6/E7/E9 TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.
Meets the requirements of: VW 502.00/505.00 MB 229.5/226.5 PORSCHE A40 RN 0700/0710 PSA B71 2296 Specifications: API SN/CF ACEA A3/B4 Packaging: 1 L Plastic 12 units / case 4 L Plastic 4 units / case 5 L Plastic 4 units / case 208 L Drum -
Meets the requirements of: MB 228.1 MAN 3275 Volvo VDS-3 Deutz DQC III CAT ECF-1a Cummins CES 20077 Mack EO-N MTU 2.0 Renault RLD-2 JASO DH-1 Specifications: API CH-4/SJ ACEA E7-2016 Packaging: 7 L plastic container 3 unit / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.
Meets the requirements of: Dexron III H Ford Mercon MB 236.20 Ford ESP M2C 166-H Ford ESP M2C 138-CJ CAT TO-2 Allison C4 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting. 208 L drum -
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT RED G12 is Monoethylene Glycolbased antifreeze coolant of red color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines of modern vehicles It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts prevents foam formation and ensures heat transfer It does not contain amines nitrites or phosphates It must not be mixed with different colors or types of antifreeze coolant
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT BLUE G11 is Monoethylene Glycolbased antifreeze coolant of blue color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT GREEN G11 is Monoethylene Glycolbased antifreeze coolant of green color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Packaging: 0.9 kg plastic container 12 4 kg plastic container 1 15 kg plastic container 1 175 kg drum - TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.
Packaging: 0.9 kg plastic container 12 4 kg plastic container 1 15 kg plastic container 1 175 kg drum - TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.
Specifications: API CF Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 7 L metal container 3 units / case 208 L drum - TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.
