These requirement specifications apply to special-purpose distillate for AMG-10, RM and RMTs oils designed to obtain low pour point hydraulic oils of AMG-10, RM and RMTs oil grades. Example of product designation at ordering: “Special-purpose distillate for AMG-10, RM and RMTs oils acc. to requirement specifications TU 38.1011286-89”.
Naphtenic acids acids exudes from alkaline wastes after leaching distillates of diesel oil and kerosene naphtenic oils are effective stimulators plants growth. Oil growth substance is represent as water solution sodium salt of naphtenic acids 40%. (OGS) steep seeds before sowing use mixture with chemical fertilizers during vegetation for plant spraying in blooming period. Using the OGS grout concentration in water from 0, 001 to 0, 4 sharply to raise cotton productivity, winter wheat and other products. The OGS is supplied: 1. OGS increased growth (evolvement) of plants especially in initial stage and vegetation stage. Influence effect is depend on plant nature, soil nature, conditions and etc. 20-25% at a speed almost always rise, on the whole this indices are contained in interval from 20% ( it is was not lawyer) and it can exceed 100% over. 2. OGS increased crops productivity. In converting to productiveness from 1m2 in total due to increase speed and growth of yields quantity effect is very seemly. 40% 3. OGS sharply resistibility diseases and survival rate extreme conditions
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
Application: used in production of lacquer materials designed for improvement of colouring agent wet-out and dispersion, increase of sedimentation stability of pigment suspension for 20-30%, reduction of light organic pigment flotation, dispersion time reduction for 30-50%. Due to surface activity and complete compatibility with different organic solvents, copper naphthenate is adsorbed on pigments, decreases discharge of main desiccants for 25-30% at the same time possesses activity synergism with Co and Mn, increases enamel coating firmness and reduces drying time to level 3. Trade dress: calcium naphthenate as a solution in white spirit. Appearance: unclouded homogenous light yellow liquid.
Increase of ecological requirements to emissions of car engines and toughening of operation terms of modern combustion engines require usage of various additives to petrols in larger scales. Restrictions on sulfur content until 0,001 and 0,005% were set forth in Sweden for the 1st time in 1991, and until present they are the strictest one. In 1993 the restriction of sulfur in fuel till 0,05 was applied in USA, in 1994 – in Canada, in 1997 – in Japan. Since 2000 diesel fuel with sulfur content no more than 0,035% is applied. Supposedly, since 2005 sulfur content in fuel wont exceed 0,005%. Along with decrease of harmful emission in exit gases, application of ecologically pure diesel fuels entailed a number of problems: breakdown of fuel pumps, due to decrease of lubricating ability of diesel fuels and .increase of corrosion activity, related with removal of surfaceactive substances able to form protective film. In 2005-2010 stiffer norms on sulfur content are proposed: up to 10 ppm and polycyclic aromatic carbohydrates up to 2%. Starting from 2000, the indicator of lubricating properties of diesel fuels under ISO 12156-1 at HFRR device is included in European standard regarding the diesel fuel EN 590, basing on it the norm is set forth: diameter of wear scar is no more 460 mkm. Requirements to quality of diesel fuels under EN 590
Stable development of our country directly depends on competitive ability of domestic products, which, in its turn, depends on quality control (i.e. level of testing labs). Specificity of analytic labs requires special system of their competitiveness recognition. Their accreditation synthesizes general approaches to accreditation of testing labs and peculiarities of analytic operations. In relation with it the actual is application of international standards: 1.management system of lab quality and application of standards 2. Lab-information systems in quality management system 3. Modern analytic equipment and automatization of separate processes in lab activity. Karvan-L” company lab repeatedly passed accreditation in Azerbaijan State Committee of Attestation, accreditation certificate No. AZ 031.01.11.02.49.07 dated on 14.03.2007. Lab possesses modern equipment for conduction of wide range of analysis in oil chemistry and oil-chemical and organic synthesis, as well as of initial products of synthesis. Particularly, Karvan-L” company lab is fitted by up-to-date machinery for quality control of oily acids, and initial raw material for production of paintwork materials based on pentophtalein, acryl, vinilcetate, polyurethane and etc. film-making clay compositions, driers, initial components of alkyds, acryl, and polyurethane enamels and emulsions, water and oil soluble inhibitors of corrosion, deemulsifiers, additions to oils, oil solvents, aromatic carbohydrates, processed oils and paints, plant oils, sewage of analogical production.
o this day, petroleum acids are still being studied by a number of researchers. Interest in the above class of organic compounds is not only attributed to practical perspective, but also to general humanitarian purposes. According to S. Nametkin, "... composition and structure of petroleum acids are closely related not only to the genesis of oil, but to the origin of life on Earth as well". Depending on their origin, oils may contain different amounts of naphthenic acids, extremely insignificant in all cases. Naphthenic acids are extracted from oils using alkali alcoholic solutions. Structure of naphthenic acids in any oil is the same and depends on the nature of oil. Among the oil produced worldwide, and particularly in the CIS region, Azerbaijan's oil features the highest content of petroleum acids. Oils of Bibi-Heybat, Romani, Binagadi, Balakhani, Sabunchi and other fields are rich in petroleum acids, which content in some crude oil grades reaches 1.5 – 2%. Due to the fact that acids extracted from naphthene-base crude of Baku oil fields have the same composition and physical-chemical properties as synthetic naphthenic acids, they are often referred to as natural naphthenic acids.
Purpose: According to GOST 24211-91 ?«Additives for concrete?» softener is applied to regulation plasticity of concrete and concern I groups of a class. Action: Plasticity mark P1 up to P5 increases sdditives of softener. After 28 days of drying hardness raises on 30-60% and norms of charge of cement on 1 m3 is reduced on 60-100 kg thus it intended for improvement of otheres building ??“ technical qualities of concrete. Quality parameters are resulted below: Color – colorless Density – 1,16 gr/m3 pH – 8-9 In the additive there is no chlorine.Norms of the charge calculated on the dry rest weight of cement of 0,4-1,0%. Guarantee: Guarantee for 6 month. Packaging on metal and plastic drums, transported in 250 kg metal containers.
Description IC series corrosion inhibitors a 98-100% active amido- or amino- imidazoline derived from naphthenic acids used to formulat corrosion inhibitors for use in drilling, production, transporting and refining of crude oil. Application Dissolved acid gases and biological deposits can cause severe corrosion to occur in oilfield water handling system. Corrosion by product such us iron sulfide, iron oxides and biological mass can cause plugging of downstream injection wells. Over a period of time, water system corrosion causes costly leaks and failures IC series corrosion inhibitors finds application for surfactants or corrosion preventives in all types of oil system. It can be used in concentrated form diluted for application. Advantages Concentrated corrosion inhibitor Effective in multiple applications Highly cationic amine compound Surfactant or corrosion preventive for oil systems Usage Optimum treatment concentration will vary depending on the specific application.
Quick details: Place of origin: baku, azerbaijan Material: pe Applilcation: agriculture. Color: optional colors or specify by clients. Description: Packaging plays an important role in the process of storage for agricultural products. Improving packaging technology helps to reduce the loss of products during transportation and storage, the better preservation of the quality of products. It is known that the most efficient for transport and storage of foodstuffs and other products, is a reusable plastic packaging. You will find a wide selection of high-quality polyethylene packaging. Also, in our proposed assortment mnogoborotnye boxes for storage and transportation of vegetables, fruits, mushrooms, berries, herbs and sprouts. Plastic box with perforated walls and a bottom intended for natural and remove excess moisture condensation. Also, the perforation allows the container to facilitate its weight, and the necessary rigidity and strength is provided by the structural ribs. Available sizes (400x300x180) mm (500x300x200) mm
Iron casting, steel casting, ductile iron, pigiron, aluminum casting, cast metal, aluminum ingots....
Steel pipes, steel coils, tubing pipes, drilling pipes, casings, aluminium billets and aluminium wire, copper cathodes, BOP, drilling tools, submarine power and optic cables of LV, MV, HV, cable termination and connectors,V-belts, mud and drilling pumps and spare parts, rubber and plastic products, natural gas heaters, fire handling facilities, power panels.Transportation
180 ml plastic cup, made out of high quality and clean raw material
Home Appliances, Electrical Equipment, Food, Machinery, Construction Materials, Construction Materials, Plastic Products.
Second hand and scrap tyres.
Copper cathodes, copper scrap.Seller agent
Labeling, coding , ink jet, ink, solvent (make-up), all kinds of security seals, motor drivers, pumps for hazardous, peristaltic pumps, industrial valves, process flow, automation processes, hospital equipments.
Cooper wire is produced in Azerbaijan.HS Code 7404 . Certificate: Copper rod for electrical purposes. Cert. valid until 02.05.2025
Round billets, 4140 and 4145 quality.
Copper Scrap, Aluminum Scrap.
