All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; An oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products. General Specifications: Installed power of the lines: 14 kW Rolling speed: from 8 to 12 lin m/min Accuracy of rolling along the length: ± 2 mm per 6 m Quantity of reduction mills: from 14 to 17 pieces Lifting capacity of the uncoiling machine: 7 tons (10 tons) Attendants: 1 person Maximum overall dimensions of the used roll: Width: 1,250 mm; Outer diameter: 1,600 mm; Inside diameter: 500…600 mm. Receiving stacker length: 6 m Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm. Working temperature range for equipment operation: from +2 to +40 o
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; a stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
Wind turbine controller, charge controller, solar panel turbine controller, hybrid charge controller.
Home Appliances, Electrical Equipment, Food, Machinery, Construction Materials, Construction Materials, Plastic Products.
Home appliances & electronic products like washing machines, dishwashers, refrigerator, vacuum cleaner, TV, coffee maker.
Hdpe/ldpe t shirt bags (with or without logos), die cut bags (with or without logos), patch handle bags (with or without logos), side and bottom seals and shrink film (shrink wrap)..
Machine made carpets.
Air jet looms spare parts.
Mining Equipment S Like Dozers Drill Rigs And Rock Drills..
Waterproofing, Heat insulation.Design of offices and houses, all type of insulation works
Medical Equipment.
Agricultural equipment.
Size, Cm : 50*50 Unit - M2 Price, Usd Ex-works Vat Exclusive : 4.7 Weight, 1 Piece: ( Kg) - 4.45 Number Of Tiles In 1 (one) Pack: ( Pieces) - 6 Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50 Weight Of 1 (one) Pack: ( Kg) - 26.7 Number Of Packs On 1 (one) Pallet: ( Pieces) - 48 Volume Of Tiles On 1 (one) Pallet: (2 ) - 72 Weight Of 1 (one) Pallet: ( Kg ) - 1310
Size, Cm : 50*50 Unit - M2 Price, Usd Ex-works Vat Exclusive : 4.7 Weight, 1 Piece: ( Kg) - 4.45 Number Of Tiles In 1 (one) Pack: ( Pieces) - 6 Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50 Weight Of 1 (one) Pack: ( Kg) - 26.7 Number Of Packs On 1 (one) Pallet: ( Pieces) - 48 Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72 Weight Of 1 (one) Pallet: ( Kg ) - 1310
Size, Cm : 50*50 Unit - M2 Price, Usd Ex-works Vat Exclusive : 4.7 Weight, 1 Piece: ( Kg) - 4.45 Number Of Tiles In 1 (one) Pack: ( Pieces) - 6 Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50 Weight Of 1 (one) Pack: ( Kg) - 26.7 Number Of Packs On 1 (one) Pallet: ( Pieces) - 48 Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72 Weight Of 1 (one) Pallet: ( Kg ) - 1310
Size, Cm : 50*50 Unit - M2 Price, Usd Ex-works Vat Exclusive : 4.7 Weight, 1 Piece: ( Kg) - 4.45 Number Of Tiles In 1 (one) Pack: ( Pieces) - 6 Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50 Weight Of 1 (one) Pack: ( Kg) - 26.7 Number Of Packs On 1 (one) Pallet: ( Pieces) - 48 Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72 Weight Of 1 (one) Pallet: ( Kg ) - 1310
Size, Cm : 40 x 40 Unit - M2 Weight, 1 Piece: ( Kg) - 2.74 Number Of Tiles In 1 (one) Pack: ( Pieces) - 8 Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.28 Weight Of 1 (one) Pack: ( Kg) - 21.9 Number Of Packs On 1 (one) Pallet: ( Pieces) - 52 Volume Of Tiles On 1 (one) Pallet: (2 ) - 66.56 Weight Of 1 (one) Pallet: ( Kg ) - 1166
