Is alkyd varnish based enamel and provides durable coating, possesses excellent features. It is used for internal and external application. It is prepared as gloss and matt enamels, and flooring enamel. Solvent: White spirit. Expenditure: 130-150g per 1m2. Drying time: 24 hours at 18-220C
Designed for protective and decorative finish of external faces of buildings and facilities with stone porous surface. Protect from contamination and preserve initial natural state of stones. It may require tinting with coloured pigment paste. Solvent: water. Expenditure: 1 kg per 6-8 m2. Drying time: hour at 200C.
Is used for colouring of organic diluted enamels and paints: pentaerythritol-modified phthalic , glyptal; Colours: red, black, blue, green, yellow.
For external and internal painting works. It is designed for painting of buildings and facilities and for interior painting, is weather-resistant, water-resistant, wear-proof and ecologically clean. White coloured, coloured into different shades as per client’s requirements. Solvent: water. Expenditure: 1kg per 2-3 m2.
Glass partitions represent a very good designer solution. They visually extend the room space and improve movement of light. Fully transparent all-glass partitions and doors can be used in office, production and trading premises as well as for facade shopwindow glazing. Furthermore, translucent structures can represent different models: various degrees of mattness and tint, decorated with fretwork and logos. Stained-glass windows are most popular of them. Glass partitions are fabricated of up to 20 mm thick shutterproof tempered glass, which improves the light flux up to 85%. Glass Partitions Provide The Following Advantages The all-glass partitions represent an advantage in that they do not visually cumber the rooms or obstruct the light flux. The all-glass office partitions and doors are secured to walls and ceiling with special fasteners; this is an advantage compared to frame-type translucent partitions as their installation takes less time and is easier, plus there is no need to use non-transparent fastening elements. A glass partition today is not only a cost effective and convenient but also a lovely item. Such partition will fit just nice into the interior. Office glass partitions installed in premises allow deploying a big number of employees due to the better noise suppression. This helps improve the psychological environment and ensure it benefits the productive teamwork. The thick shutterproof glass keeps warmth inside and creates a cozy atmosphere to each employee’s request. The glass partitions and doors are durable, heat-resistant, require no maintenance and are virtually safe.
A winter garden represents a special architectural element with glass walls and roof and is decorated with various decorative plants Year over year there are more country mansions and cottages with special attention to winter gardens. They can give certain flair to the indoor scene and become a lively garden-like place for cozy pastiming and enjoying the beauty of the nature. Winter gardens of different price can be erected as an individual building or a part of a house, housing different plants of different sizes. It is quite problematic and not worth to build a garden on one’s own, so you can easily use our company’s services and order one. Main reasons why Karvan-Glass: 1. high material quality guarantee; 2. excellent design; 3. short order delivery time.
The all-glass enclosing structures of elevator shafts provide the main advantage of perceptible fragility and exquisiteness combined with guaranteed reliability and long life. The panoramic glazing of elevator shafts with architectural shutterproof glass (which is more commonly referred to as a panoramic elevator) has an advantage to conventional enclosed shafts. The main type of elevator shaft glazing Karvan-Glass apply is point glazing: glass is attached to the bearing structure made of stainless or construction steel using point fittings specially designed to compensate for dynamic loads that occur during operation of an elevator. In doing so, the maximum transparency is achieved. The versatility of elevator shaft designs using architectural safety steel is virtually unmatched among other materials. It ranges from full transparency which gives a panoramic view to passengers in an elevator through to modern photoprints on glass capable of embodying any designer’s concept. For instance, hidden glass fittings enable to create a solid structure that shares concept with the decorative glazing of walls.
Glass doors are the integral part of architecture today. This is a fantastic choice for any kind of premises, from business centers through to apartments. One may think glass is not a strong material, but it is a misconception. Tempered glass manufacturers have long been offering the product that easily provides a good heat and noise insulation and boasts an outstanding strength and long life. Broad product range The broadest selection of glass doors, fittings and door cases enables to pick a door for any indoor scene. Quality High quality glass from world’s top manufacturers. Simplicity Leaf made of environmentally friendly and easily maintainable material. Safety Safety in use – tempered glass is very strong and does not form sharp splinters if broken. Long life Always the same appearance throughout the life.
Glass arbors, just like arbors made of more conventional materials, are a fine choice for their key function, which is providing comfort in a garden or a park. Among advantages of a glass arbor: the glass structure can be opening type, so your can rest in an open arbor and enjoy fresh air and flower scent while the weather is good, but hide behind the glass if it aggravates; you can enjoy watching the environment through the translucent façade without perceiving the thin boundary in between; the arbor glazing is a great protection from the weather and wind without impairing the feeling of ‘being in the wilds’; the laced and transparent structure of an even big arbor will not create a visual impression of obstructed space in your garden. What are the design features of glass arbors? The most widespread type of arbor glazing in modern construction is either shutterproof glass of different thickness or safety glass. This material has a number of undisputable advantages: high strength which enables to withstand big wind loads and humming blows; safety in operation which guarantees no cuts in case the glass is broken after all; long life.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.25-7.5mm Item: Single-Layer Corrugated Pipes Protection Rating: IP65 Structure: Bellows inside and outside Certification: ISO9001 Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Standard: OHSAS 18001 Specification: AD7.0MM-AD106.0MM OD: 7.0-106.0mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines. Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material. Advantages and properties: - They do not rot and corrosion; - Resistant to chemicals; - Resistant to external loads and shock resistance; - Waterproof and resistant to moisture; - Non-conductive, so they eliminate the risk of electric shock if cable damaged; - They provide protection against mechanical damage; - Long life of at least 50 years; - They retain their characteristics and properties during the entire lifetime; - They have a wide operating temperature range; - They can be laid open and a closed manner; - These types of cables are flexible and do not need additional coupling fittings; - These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables; - For the installation they do not require special skills and special equipment; - They are lightweight, easy to carry, for loading/unloading, handling and storage; have a low cost; - They have environmentally friendly and safe material. Material HDPE Application Areas: 1.Protection of high and low-voltage conductors from mechanical impacts 2.Protects environment from aggressive impacts when cabling under ground 3.Concealed mounting inside of concrete and installation 4.Sewage, ground and storm water disposal Working temperature: From -40ºC till+90ºC Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Pipe wall color can be changed with the consent of consumer.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-70.5mm Item: PE 100 pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black Standard: OHSAS 18001 Specification: As your requirement OD: 16-1200 mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Preparation of ?? 100-based polyethylene Pipes is considered as a beginning of a new phase in plastic Pipes production. These Pipes are considered more contemporary and characterized by high pressure resistance. As distinguished from other brands of Pipes (?? 63, ?? 80), these Pipes with less wall thickness have higher mechanical characteristics. Pipes ?? 100 are applied in the following areas: • Underground and surface drinkable and technical water pipeline network • Water drainage system • Field irrigation systems • Oil fields • Chemical and petrochemical industry • Construction of buildings and industrial facilities • Construction of main and local gas pipelines Advantages of PE100 Pipes: • Durability. ?? 100 Pipes obtain 50 years of minimal guarantee, this duration can be extended during operation. • High shock resistance, cracking resistance • High chemical resistance • Resistance to sunlight • Manufactured in standard sizes and in roll form • Smooth inner surface • Suitable for the usage in seismically active areas • Freeze resistance • Wide range of pressure Range of pipe sizes produced under normal pressure • DN - outer diameter of pipe, (mm) • s - pipe wall thickness, (mm) • SDR - Standard Dimension Ratio • M - Estimated weight (kg/m) 20 bar - SDR 9 DN: 16- 630 mm S: 2-70.3 mm M: 0.09-123 kg/m 16 bar - SDR 11 DN: 20-710 mm S: 2-64.5 mm M: 0.116-131 kg/m 12,5 bar - SDR 13,6 DN: 25-1000 mm S: 2-73.5 mm M: 0.148-214 kg/m 10 bar - SDR 17 DN: 32-1200 mm S: 2-71.1 mm M: 0.193-252 kg/m 9,5 bar - SDR 17,6 DN: 40-1200 mm S: 2.3-68 mm M: 0.281-242 kg/m 8 bar - SDR 21 DN: 40-1200 mm S: 2-57.2 mm M: 0.244-206 kg/m 6,3 bar - SDR 26 DN: 50-1200 mm S: 2-45.9 mm M: 0.308-167 kg/m 5 bar - SDR 33 DN: 63-1200 mm S: 2-36.7 mm M: 0.392-134 kg/m 4 bar - SDR 41 DN: 75-1200 mm S: 2-29.4 mm M: 0.469-108 kg/m
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Item: Winding Pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black (inside yellow) Standard: OHSAS 18001 Specification: As your requirement OD: 800-3500 mm Length: 1-6 meters ( in specific order 12-18 meter) Packaging & delivery: Depends on your order. Description: Winding pipes of large diameter,high and low pressure.Standart length of this pipes: L= 6 meters.This length makes easy to package them in a raw,storage and transporting.Possibility: 1-6 meters for special targets.Some situation needs pipes with length,larger than standart,and less number of joints,so we could offer pipes of 2-3 sections with length 12 and 18 meters. Nominal diameter of the pipe corresponds to its inner diameter. Applied wall construction leads to the simplicity and strength of the pipe ring. Compared with other pipes, they dare less weight and wall structure of these pipes allows a higher tolerance to static loads. Structural rigidity depends on the type of profile. Profiles type PR: This type has a smooth inner and a ribbed outer surface. Low weight can be obtained a high hoop strength. Profiles type OP: This profile type also has a smooth inner and a ribbed outer surface. The external profile has the shape of "Olympic rings". It is also light weight and high strength ring.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Packaging & delivery: Depends on your order. Description: Until recently in the construction of sewage wells used only concrete and iron structure. However, it is much better to use plastic manholes. Plastic wells used in the networks of household, storm sewage and lubricant. Plastic wells are also used for arranging industrial technological channels. Wells provide access to drains, shut-off and control valves and measurement technology. In addition, they can be used as drainage, rain receivers and inspection chambers. Plastic wells nesomnitelnymi have the following advantages compared to other types of wells (concrete, cast iron, brick) • a small proportion (compared with concrete) • easy installation, transportation and storage • easy maintenance • long service lines and trouble-free operation • high impact resistance material • connection leaks • resistance to mechanical damage, corrosion resistance • ductility of the material, its resistance to low temperatures, abrasion, UV radiation. • resistance to aggressive chemical environments • blocking leakage of sewage into the soil • high strength of the well shaft • lack of height restrictions • complete sealing of all joints and penetrations • Products are not afraid of frost and mechanical loads. Offered by our company options polyethylene manholes are used for a variety of purposes sama, subdivided into: • Inspection • Stormwater • Drainage • For measuring devices and valves • In order to establish the electrical, instrumentation and automation Also polymer wells divided by functionality: Sight - allowing to carry out maintenance work, which are used in floatable, household and storm water channels. Heavy - intended to collect rainwater, often with sand trap. Perepadnaya - allowing you to connect a channel on a mark above the bottom of the tray portion of the well. Cable plastic well to order - for laying the cabling in the electrical connection. Distribution of plastic wells - sharing household and sewer racks for several tanks settling.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: 78*78-325*380 O.D: 50-100 mm Model Number: HDPE Thickness: Depends on your requirement Color: White Material: PE Standard: OHSAS 18 001 Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°. Packaging & delivery: Depends on your order. Description: Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance. Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry. Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical parameters: Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Tee Reducing Cross T 90 dgr., Tee Reducing T-Joints 90 dgr. Packaging & delivery: Depends on your order. Description: Thermoformed fittings for PE 100 pipes.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black Material: PE Standard: OHSAS 18 001 Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr. Packaging & delivery: Depends on your order. Description: PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change. PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set. PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.
Quick details: Place of origin: baku, azerbaijan Item: seat Material: pe Applilcation: university, stadium, arena, school, etc. Color: optional colors or specify by clients Installation: simple mounting Packaging & delivery: Depends on your order. Description: Polymer products plant produces high-quality seat stadium, as well as for all other outdoor and indoor sports and concert facilities. Plastic seat has an ergonomic and attractive design, easy to install and maintain. Plastic seats for the stadium are mounted on any surface by fixing in 4 points. Products provided with clear and detailed instructions for assembly and use, in addition, the company's specialists are always ready to carry out installation and supervision of installation work on the installation of plastic seats anywhere in the country, and if necessary, in countries near and far abroad.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 0.9-1.2 mm Item: dip Certification: iso9001 Color: black Standard: ohsas 18001 Specification: as your requirement Od: 12-20 mm Length: 36-40 mm (length of drip component) Drip flow rate: 1.5-4.0 (liter/hour) Distance between drip components: 190-1050 Packaging & delivery: Depends on your order. Description: After cleaning the mixture from sand, clay, water and algae, etc. With the help of special filters, water is transferred in drops directly to the roots of plants through drop irrigation pipes. Drip irrigation pipes can be used in any landscape terrain. Applicaton of this system allows automation of overall irrigation system, which in its turn facilitates to reduce the use of work force. Contrary to surface irrigation method, drip irrigation increases the efficiency factor higher than 95%. Application of drop irrigation components has several positive aspects: • Enables the fertilizer to penetrate with water • Enables maximum equal distribution of water and nutrients • Allows irrigating large territories simultaneously in small portions • As the ground between plants is dry, it prevents the grow of weeds that helps to facilitate pest control. • High pressure is not required in drip irrigation that reduces operating expenses.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 1.9-15 mm Item: polypropylene ppr pipesprotection rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 20-90.0 mm Type: pn-10, 16, 20 Length: as your requirement Packaging & delivery: Depends on your order. Description: Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 2.7-12.5 mm Item: three-layer fiber glass pprc Rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 16-75 mm Length: as your requirement Packaging & delivery: Depends on your order. Description: Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices. Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed. • Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.
