As the official wholesaler & distributor in korean domestic market, sunmotors co., ltd expand our market for exporting the genuine spareparts to worldwide potential market and customers.
Hyundai & kia's exporting genuine standard package.
Compatible with the newest cars which require a direct can connection for diagnostics including all golf-5 platform cars and latest audi a3, a6 and a8, q7, etc.
Protocol timing indistinguishable from a real vag/vas tool. Works reliably even with "difficult" control modules such as the 1991-1994 1z audi tdis and the 1993-1994 audi 2.6l with hella ecu. Built-in vag-saver functionality -- instantly alerts the user if either the k/k1 line or the l/k2 line is shorted to ground or vbatt.
Full support for dual-k lines found in "new" (b6/8e chassis audi a4 and 2002+ audi a6, a8, q7, etc.
Clip's main menu allows you to:
Fªfp see all the information relating to the vehicle
Fªfp look at the function you want to use:- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (obd tests)
- base doc (access to technical notes)
- physical measurements
- antipollution
- multimeter
Renault can clip set includes :
Fªfp can clip interface
Fªfp 2 cables for can clip <-> car connection
Fªfp 1 cable for can clip <-> pc connection
Fªfp 1 software cd (clip v80, can be installed on any pc)
It's very simple to diagnose a vehicle using renault can clip diagnostic interface: just select the vehicle make, enter the v.I.N. And press enter.
An essential piece of kit for the majority of vehicle owners - save time and money with this handy palm sized MaxScan 405 VAG code reader which enables you to troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC's) that appear when the "check engine" light is showing.
DTC's are codes that are stored by the car's in-board computer system in response to a vehicle issue. Codes relate to a particular problem and are made up of a 5 digit alpha-numeric sequence and are used as a guide to help locate the fault in order for you to fix the vehicle.
This scanner reads and erases all DTC codes of the engine, airbag, ABS and A/T and turns off the MIL lights of the engine, airbags, ABS and automatic transmission
Benefits:
--Reads and erases DTC's and re-sets 'Check Engine' light
--Reads both generic and manufacturer specific codes
--Identifies and displays pending codes
--Determines MIL status
--Reads freeze frame data
--Retrieves the VIN on 2002+ vehicles that support Mode 9
--Displays I/M readiness status
--Large 128 x 64 pixel LCD screen with back light and contrast adjustment
Extra Benefits Specific to Audi, Seat, Skoda and VW's:
--Reads and erases DTC's and re-sets service lights on the ABS, airbags, automatic transmission, climate control, engine immobilizer plus others
--Resets Oil Service Light
--Retrieves the VIN
--Turns off MIL lights for the ABS, auto transmission, airbags and engine as well as the majority of the other systems
Will the MaxScan 405 work with my car?
This reader works with the majority of OBD 2, EOBD and CAN-BUS vehicles manufactured worldwide including the following:
Acura Kia
Asuna Land Rover
Audi Lexus
Bentley Lincoln
Buick Mazda
Cadillac Mercury
Chevrolet Mini
Chevy Murkur
Chrysler Nissan
Citroen Oldsmobile
Daewoo Opel
Dodge Peugeot
Eagle Plymouth
Fiat Pontiac
Ford Porsch
Geo Renault
GM Rover
GMC Saab
Honda Saturn
Hummer Scion
Hyundai
Infinity
Isuzu
Jaguar
Jeep
Plus VAG vehicles such as:Audi, Volkswagen, Seat and Skoda vehicles manufactured since 1990 - even with newer models that require a direct CAN connection
If your car has a 16 pin 'OBD style' data link connector (DTC) the code reader is compatible, however if it has an older-style 2x2 DTC then it will depend whether there are 3 or 4 wires connecting to the pins. If there are 4 wires then the scanner will work but if there are only 3 wires, leaving one pin disconnected, then, sorry, but this product will not work.
If your vehicle is the 2x2 DTC 4 wire style you will need a 2x2 cable adapter. (Not included in this sale)
The scanner works with the following protocols:
--J1850 PWM
--J1850 VPW
--KPW 2000
--ISO 14230-04
--ISO 9141
For specific compatibility information please check your vehicle's user guide or with the manufacturer. Please do bear in mind that while we do our very best to provide accurate information we cannot be held responsible in the unlikely event that this code reader does not work with a certain car or van.
Specifications:
--Display: backlit 128 x 64 pixel display with contrast adjustment
--Operating temperature: 0 to 50¿¬pC (-32 to 122¿¬pF)
--Storage temperature: -20 to 70¿¬pC (-4 to 158¿¬pF)
--Power: 8.0 to 15.0V - provided by vehicle's battery
--Dimensions: 17.5 x 9 x 3cm (7 x 3.5 x 1 ")
The MaxScan 405 is brand new and is supplied with OBD2 cable, serial cable (for upgrading the scanner via the internet), nylon storage/carry case and instruction manual
We're positive you'll have many happy years of use from this product, however we understand things can occasionally go wrong, which is why we are pleased to offer a superior 1 Year Warranty with this sale that covers you in the unlikely event that you experience any problems.
STAR software upgrades ensure that your STAR auto scanner is always at its best. Our experienced and dedicated staff will support your Technicians and offer advice and information to help resolve the most demanding vehicle diagnostic problems.
The Star Diagnostic provides full access for automotive repair at the OEM level.
-Full component activation.
-Setting of adaption values.
-Coding of the new control modules.
-Read & Change ECU coding.
Auto Diagnostics
-Multiple task support
-Wide colour touch screen
-Printing Function Supported
-Online updating
-Unrestricted CF card downloading
-Large automobile maintenance database
Product Function
-Printout function
-Live data graphic display
-Circuit diagram reference
-Internet update function
-Education Demo with projector
-Multiple language display function
Technical Parameter
-128 MB CF card
-Built-in USB port
-7.4" colour touch screen
-I/O of main unit: standard serial port RS232
-Microprocessor of 32 bit with 60MHz frequency
Features:
ELM327 USB is the latest PC-based scan tool. It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327 USB. The output protocol (connection to laptop) is USB.
Processor: ELM327 USB
Output protocol: RS232
Baud rate: 9600 or 38400
Operating voltage: 12V, internal protection from short circuits/overvoltages
Nominal idle current: 45 mA
Description:
OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms - DOS and Windows.
The program lets you perform the following operations:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others...
Upcoming Features:
Data graphing and logging
Freeze Frame data
Continuous and Non-Continuous Oxygen Sensor test results
Free software:
Scantool.net
GM Mode 22 Scan Tool by Terry
OBD Gauge for PalmOS and Pocket PC by Dana Peters
OBD Logger by Jonathan Senkerik
OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy)
obd2crazy.com
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
pyOBD by Donour Sizemore for MacOSX and Linux
RDDTC by Pete Calinski
Real Scan by Brent Harris
ScanTest for Pocket PC by Ivan Ganev aka a-ser
wOBD by WDT
MaxScan GS500 this is an extended GS400 with the ability to display live engine data.
The new generation of automotive code readers that support Controller Area Network(CAN) protocol has arrived. The MaxScan GS500 CAN OBD2 / EOBD auto scanner supports all OBD2 protocols, including the newly released Controller Area Network(CAN) protocol, allowing users to keep up with the latest development in automotive diagnostic scanning.
An essential piece of kit for all car and van owners; save time and money with this hand held code reader that enables you to troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC) that appear when the "check engine" light is showing.
DTCs are codes that are stored by the car's in-board computer system (ECU) in response to either a mechanical or electrical vehicle issue. Codes relate to a particular problem and are made up of a 5 digit alpha-numeric sequence and are used as a guide to help locate the fault in order for you to fix the vehicle.
If you have got a connector in your car that looks like this: Then the chances are that this code reader will work for you!
Additionally, this scanner has CAN Protocol Support which gives wider vehicle coverage. It resets the check engine light, reads and clears all generic, and some manufacturer specific DTCs, displays the I/M readiness status, views OBD II freeze frame data, displays pending codes, retrieves vehicle information (VIN) [on supported vehicles], and determines the status of the malfunction indicator (MIL) lamp.
Unlike earlier versions, the GS500 displays the DTC definitions on the backlit and easy-to-read screen. This is the latest MaxScan OBDII scanner and totally out-performs all previous models.
Help prevent costly future engine trouble and identify problems when buying or selling a used vehicle with the GS500 scan tool.
Protocols:
- Works on any Universal OBD2 or EOBD Vehicle.
- Supports ISO, VPW and PWM bus systems as well as can bus systems
- U.S. Models - European - Japanese - Asian - German - Korean:
- Suitable for almost all US cars after 1996 - European cars after 2000.
The GS500 supports:
CAN-BUS
VPW
PWM
KWP2000
ISO9141
EKWP2000
Features & Benefits
Reads Generic Codes(P0, P2, P3, U0) and Manufacturer Specific Codes (P1, P3, and U1)
Erases trouble codes and resets Check Engine Lights
Displays I/M Readiness Status and state OBD check
Detects OBD2 Freeze Frame Information
Determines the malfunction indicator lamp(MIL) status
Identifies and Displays Pending Codes
Retrieves VIN(Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Wider vehicle coverage with CAN Protocol support
Displays Total # of Codes Retrieved
Code definitions displayed on unit LCD screen
View live engine data parameters (PIDs)
Unit upgradeable via flash programming (when available)
Easy to use with friendly menu interface
Large, 128 x 64 easy-to-read backlit LCD display with adjustable contrast
Hot Keys for quick READ & ERASE
Detachable and replaceable 1.8 metre 16-pin OBD2 cable
Specifications
Display: 128 x 64 backlit LCD display
Operating Temperature: 0 to 50degC (-32 to 122 degF)
Storage Temperature: -20 to 70degC (-4 to 158 degF)
External Power: 10.0 to 15.5 Volts provided via vehicle battery or USB
Carry Case
CD
PC Connection Lead
Full Instructions
Please Note
Even though later VAG vehicles are OBD-II compliant, please use the VAG405 VAG Trouble Code Reader or the simpler VAG305.
Vehicle Coverage
European Vehicles
If your petrol passenger vehicle was manufactured for sale in Europe, with the model year of 2001 or newer (and in some cases 2000), you have the EOBD / OBDII interface. EOBD diesel vehicles start with the 2004 model years. Some Asian models such as Subaru were OBD-II before 2000.
US Vehicles
Generally these went OBD-II from around 1996. For example:
GM/Vauxhall/Opel/Holden '96 - Current Year (OBD-II)
Ford '96 - Current Year (OBD-II)
Chrysler '96 - Current Year (OBD-II)
Toyota '96 - Current Year (OBD-II)
Honda '96 - Current Year (OBD-II)
NISSAN '96 - Current Year (OBD-II)
SUBARU Impreza
All other Asian and European '96 - Current Year (OBD-II) i.e. Porsche, Opel, BMW, Mercedes, Volvo, Renault, Peugeot, Citroen, Daewoo, Alfa Romeo, Hyudai, Daihatsu, Lancia, Mazda, Mitsubishi, Kia, Saab, Subaru, Smart etc
CAN-BUS Cars?
The GS500 works on all OBD-II compliant vehicles. A lot of other types of code readers do not work on CAN-BUS based cars; here is a small selection of cars that use CAN-BUS:
All Golf-5 platform cars (A5 platform) including:
2003+ VW Touran (1T chassis)
2004+ VW Golf (1K chassis)
2004+ VW Caddy (2K chassis)
2004+ Audi A3 (8P chassis)
2004+ Seat Altea (5P chassis)
2004+ Skoda Octavia (1Z chassis)
2005+ Seat Toledo (5P chassis)
2005+ Golf Plus (5M chassis)
2005+ Seat Leon (1P chassis)
2005.5+ Jetta (1K chassis)
2006+ Eos (1F chassis)
2003+ Audi A8 and A8L (D3 platform, 4E chassis)
2005+ Audi A6 (C6 platform, 4F chassis)
2005+ Audi A4 ("B7" platform)
2005.5+ VW Passat (B6 Platform, 3C chassis)
This product can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat, VW, VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles.
CAN odometer correction
VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+
CAN read Security Access Code
VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6
K read Security Access Code,odometer correction,
Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Skoda Fabia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)
Key programmer
Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)
