Solubility: can be can be dissolved in water at any ratio
Hand feeling:instantly hydrophilic
Features And Advantages
This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric;
1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general;
2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent;
3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO.
Usage
1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more;
2. After thinning, you can use exhausting method and continuous padding mothod:
Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking;
Packaging and storage
50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Physical and chemical property:
Appearance: Yellowish or Transparent Liquid
Ionic properties: Slight Cation/Nonionic
Solid content: 60 1%
PH value (1% aqueous solution 20): 6-8
Product characteristics
1.Super smooth and soft
2.Especially suitable for polyester fabric and blends
3.Suitable for continuous process techniques, no stick roller
4.Without APEO
Usage Method
Diluted with water at ratio 1:5-7, self-emulsifying.
Exhausting: recommended usage: 2--4% (O.W.F)
Padding: 1540g/l
The special process, please appropriate adjustments according to the samples.
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 12 months of storage expiry.
Physical and chemical property:
Appearance: Yellowish or Transparent Liquid
Ionic properties: Slight Cation/Nonionic
Solid content: 60 1%
PH value (1% aqueous solution 20): 6-8
Product characteristics
1.Super smooth and soft
2.Especially suitable for polyester fabric and blends
3.Suitable for continuous process techniques, no stick roller
4.Without APEO
Usage Method
Diluted with water at ratio 1:5-7, self-emulsifying.
Exhausting: recommended usage: 2--4% (O.W.F)
Padding: 1540g/l
The special process, please appropriate adjustments according to the samples.
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 12 months of storage expiry.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 60 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package and Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Solubility: can be dissolved in water at any ratio
Hand feeling: special soft, smooth
Features And Advantages
This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing;
Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect.
Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing;
Dilution and use the method
This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value;
After thinning, you can use exhausting method and continuous padding method,
Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180
Package And Storage
50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 60 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package and Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
5W-30 is full synthetic multigrade engine oil of
premium quality manufactured using high quality
additives and base oils for fuel efficiency and superior
performance for petrol and diesel engines equipped
with or without DPF technology and/or TWC emission
systems. This oil is suitable for light duty CDI engines
with EGR and DPF emission systems.
