Instructions for use 01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
Complete kit with faucet and fittings. Two filters, sediment and carbon. 25 kilos.
Manufacturer Henan UTERS Industrial Technology Co.,Ltd Brands UTERS / Negotiable Filter Type Hydraulic Oil Filter Element Size Data Please contact our sales manager if you need to confirm parameters. End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc. Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials Filter Accuracy 1~100um; filtration ratio: Xâ?§100. Collapse Pres. 21bar~210bar Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc. Operating T. -30â??~+100â?? Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa. Position On the suction line, pressure oil line, return line, bypass, and separate filter system. Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields. Packing Plastic bag inside,paper box outside / Negotiable Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services. Production Time 10 Work Days After Payment / Negotiable Warranty 12 months/ 365 days after shipment. Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid ISO 3723 filter element-end-to-end compliance test ISO 3724 filter element-determination of fatigue characteristics ISO 3968 Filter Element-Differential Pressure Flow Characteristics ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics
4 stage filtration system taking main or rain water and providing pure water through 4 stage filtration and reverse osmosis .
Air purification equipment Bio-oxygen air purifiers are designed to be installed inside central air handling units to clean, disinfect and deodorise the supply air as the air flows through the central air handling unit.
Air sterilization Air sterilization equipment Bio-oxygen air sterilizers are installed in the mixing plenum of a central air handling units where they continually clean, disinfect and deodorise the supply air as the air flows through the central air handling unit. Individually packed.
Air purifiers Bio-oxygen air purifiers are installed inside the mixing plenum of an air handling unit where they continually clean, disinfect and deodorise the supply air and the air flows through the mixing plenum. Individually packed
Filtration.
Built to design for use worldwide a commercial unit to clean water upto 1000's of litres per hour. Complete with filters, pumps, housings, tanks, centrifuge etc.
Ceramic tiles.
Ceramic wear parts : PF bends, mill parts, cyclones, standard ceramic wear resistant tiles, ceramics.
T shirts, jewellery rings necklaces, bracelets bulk jewellery sets, auto parts oil filters, air filters, fuel filters, auto bolts, nuts, car globes, hair colours and products, toilet paper, facial tissues bulk.
Glass.
Application: 1.Environmental protection city life of dirt, power plants, petrochemical refinery sludge sludge, coking, industrial sludge concentration, sludge dewatering. 2.Food and drink fruit juice slag, slag of animal oil, plant oil, soy protein isolates of dehydration, concentration of fish protein, wheat starch B dehydration. 3.Chemical * barium dehydration, kaolin industry classification and grade of graphite and PPT, classification of drilling mud. 4.Coal tar, coal tar dehydration and slag, adapted to the different viscosity and water (emulsion) of coal tar separation, after the separation of reach national standard tar. 5.Oil separation, vegetable oil, like avocado oil, olive oil, sesame oil, soy oil and so on. animal oil, pork oil, fish oil, chiecken oil, beef oil ect. waste oil like the waste heavy oil, fuel oil, other waste oil.
3 phase Decanter Centrifuge: Principle of threephase decanter centrifuges is as shown in the above figure. The substance to be separated is fed by the feeding tube into the accelerating cavity of the spiral conveyor, then enters high speed running drum wall. As the light liquid, heavy liquid and insoluble solid contained in the substance have different specific gravities, the three materials are subject to varied centrifugal forces: the insoluble solid settles into the inner wall (outside) due to its highest specific gravity and subject to maximum centrifugal force; the light liquid settles maximum far away from the inner wall (outside) due to its lowest specific gravity and subject to minimum centrifugal force; and heavy liquid settles in the middle place. The insoluble solid is discharged from the solid discharge port by a spiral feeder which has relative differential speed with the drum; and the light and heavy liquids are then separated by different structures inside the machine wherein the heavy liquid is discharged by the centripetal pump, and the light liquid is discharged via the force of gravity, thus the purpose of three phase separation is achieved.
Outdoor and indoor air purifier, indoor sterilizer, street light air purifier.International business consulting, asia marketing consulting
Catalytic converter.
Ionized Water Ionizer Technology.
Alkaline water filters.
