Paper boards.
Game Card Board..
Metal roof sheet.
Softwood and hardwood. laminated joint product.
Wood Products Pine Wood, Oak Wood, Red Wood, Birch Wood, Impregnated Wooden Poles, Impregnated Woden Pile, Wooden Pallet Board, Wooden Travers, Log Billet Tree.
Led Tv Display.
Wooden statue like buddha, ganesha, jesus statue,buddha statue,ganesha statue,jesus statue,wooden statue.
plywood sheets.
Melt-blown PP Non-woven 25g affinity layer + Melt-blown PP Non-woven 25g filter layer + Spunbonded PP Non-woven 25g affinity layer EN14683:2014 Type IIR ASTM Performance level : Level 2 Bacterial Filtration Efficiency: >98% Particle Filtration Efficiency: >98% @ 0.1 micron TGA approved - ARTG 333627 Material Composition: Straps PP Non Woven Elastomer Nose Clip Aluminium Inner (PP Spunbonded), Middle (PP Melt blown Non Woven fabric) Outer (PP Melt blown Non Woven Fabric) Approximate weight of product: 2.5g
2 Piece Reusable Health Care Mask (unique in the marketplace) The whole mask is a Triple Layer in standard white (can be made branded and unbranded) Outer Layer Made of a double layer 30GSM non-woven polypropylene spun-bond fabric Inner Filter The third layer is a filter called a' D 15 filter" It is inserted in to an opening at the top of the mask The D15 filter as been specially developed (and tested against Covid-19) It is manufactured in South Africa for use in cloth face masks for general population The filter works effectively by entrapping at least 95% of micro particles above 5�µm (microns) which is crucial in fighting against the Covid-19 Virus Special Features The outer mask lasts approximately 6-7 months if cared for properly The filter can be sterilised 7 times, the needs to be changed The mask will be sent in a recycled plastic storage bag 5 filters will be included which is approximately 35 days The instructions for how to care for the mask will be included
Plywood, formply.
Trading in motherboard scrap, pcb waste and pc board scrap, scrap copper, timber, iron .
Motherboards scraps, keyboards scrap, CD ROM scraps, hard disks scraps, monitors scraps, electronic boards scraps.
Used computers, used computers and parts type: processors, used computers and laptops (i3, i5, i7 processors of 3 5 generations, 4+gb ram) .
What is a Decanter Centrifuge? Horizontal Bowl centrifuges are also known as decanter centrifuges, centrifugal decanters or simply decanter machines and are primarily used for separation of liquids from appreciable amounts of solids. Decanters can separate over 50% (v/v) solids from liquids on a continuous basis. Typical industrial decanter applications include Crude Oil Tank Bottoms; Waste Oil; Industrial Wastewater; Sludge Dewatering; Fish Meal; WVO/UVO De-Sludging; Paint Sludge; Rendering etc. etc. Application: Decanter centrifuge is widely used in industries as municipal and industrial waste water treatment, food processing, chemicals, etc. 1. Decanter centrifuge solid phase dehydration: dehydration effect for processing materials of solid particles. 2. Decanter centrifuge particle size classification: used in the removal of material of large diameter solid particles. 3. Decanter centrifuge liquid clarification: used for removing solid particles in the suspension liquid are clarified
GQ series clarifying centrifuge is mainly used to separate all kinds of suspension liquid which is difficult to separate, especially suitable for solid-liquid separation with small concentration, large viscosity, fine solid particles and small difference between solid and liquid.For example: all kinds of traditional Chinese medicine extract, malic acid, fruit juice purification, all kinds of oral liquid clarification, graphite residue removal, graphite milk subdivision, ink refinement, various proteins, saponins, pectin extraction, the separation of each component protein in the blood, vaccines, mycelium, bacteria, paint, all kinds of resin rubber deep liquid purification. GF105 Milk Cream centrifuge separatoris mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
GF centrifuge separatoris mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
The disc stack separator is also called disc separator. It is a device that rapidly separates solid and liquid through high-speed centrifugal force. The alias is also called disc centrifuge or conical plate centrifuge, which belongs to a type of vertical centrifuge. The disc separator is driven by a motor and rotates at high speed. In the bowl of the disc separator, there is a set of disc-shaped parts nested with each other-commonly known as discs. There is a small gap among the discs, which are used for centrifugal sedimentation of materials. The suspension (or emulsion) to be processed enters the bowl of the disc separator through the feed pipe. When the suspension (or emulsion) flows through the gap between the discs, the solid particles (or droplets) settle on the disc under the action of the centrifuge to form a sediment (or liquid layer). The sludge slides along the surface of the disc to separate from the disc and accumulates in the inner bowl where the diameter is large, and the separated liquid is discharged from the bowl through the liquid outlet. For the 3-phase disc separator, there are two centripetal pumps inside, which can discharge the two immiscible liquid phases having difference densities. The role of the discs in the disc separator is to shorten the settling distance of solid particles (or droplets) and expand the effective settling area of the bowl so as to greatly improve the production capacity of the disc separator. The solids accumulated in the bowl can be discharged through the automatic slag discharge mechanism without stopping the machine. By using the disc separator, solid-liquid-liquid 3-phase separation or solid-liquid separation is realized.
Solid Liquid Separation Drilling Decanter Centrifuge For Drilling Fluid / Oil Field Drilling mud is an integral part of most drilling operations,it is also called drilling fluid, there are some solids suspended in the fluid. Shenzhou Decanter Centrifuge can provide solid-liquid separation technology to your drilling mud application, enabling reuse of the material and more efficient and cost-effective disposal.We have our special design and collocation decanter centrifuge for oilfield and industrial solids control, drilling fluid / mud cleaning and process water treatment. Shenzhou Decanter centrifuges are used to process water-based and oil-based drilling fluids. Oilfield decanter centrifuges mechanically increase the gravitational force exerted on the liquid and solids mixture present in the mud system. We can apply over 3,000 G-forces machine to separate the particles in the fluid. Shenzhou Decanter centrifuges have wide process capacity to meet all ranges as per drilling program.It is commonly and widely used used for oilfield and gas well operations providing efficient solids control while significantly reducing the operator's total mud cost and minimize waste disposal volumes.
Suppository filling production line 1. Automatic suppository production line is suitable for the production of special shapesof slugs such as bulletshape, torpedo shape and duckbill shape, which can meet the production of suppositories of various shapes. (Make a mold according to the sampleor requirement.) 2. From the beginning of the automatic suppository shell molding, to the filling station of the liquid materiel, the recip-rocating cooling setting (liquid conversion solid state), the continuous sealing, the batch number, the finished product cutting (the number of cutting particles is arbitrarily set on the touch screen,1-10 Free cutting) One-time molding suppository for embedded type filling, filling accuracy + / - 2%, filling material barrel has electric heating insulation system, the top is equipped with a uniform mixing machine in order to make materiel, materiel by high precision in VAT filling pump into the filling head, materiel through the other end of the cycle to rest after filling material barrel filling again next time.
