Please click here to check who's online and chat with them.

Find Verified Ambulances Special Purpose Vehicles Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Melbourne   -   Perth  
Sep-28-20
Supplier From Australia
May-24-20
Supplier From Australia
Jul-21-20
Supplier From Australia
May-24-20

L3 D15 Face Mask

$5
MOQ: Not Specified
 
2 Piece Reusable Health Care Mask (unique in the marketplace)

The whole mask is a Triple Layer in standard white (can be made branded and
unbranded)

Outer Layer
Made of a double layer 30GSM non-woven polypropylene spun-bond fabric

Inner Filter
The third layer is a filter called a' D 15 filter"
It is inserted in to an opening at the top of the mask
The D15 filter as been specially developed (and tested against Covid-19)
It is manufactured in South Africa for use in cloth face masks for general population
The filter works effectively by entrapping at least 95% of micro particles above 5�µm (microns) which is crucial in fighting against the Covid-19 Virus

Special Features
The outer mask lasts approximately 6-7 months if cared for properly
The filter can be sterilised 7 times, the needs to be changed
The mask will be sent in a recycled plastic storage bag
5 filters will be included which is approximately 35 days
The instructions for how to care for the mask will be included
Nov-26-21
Supplier From Australia
19 Ambulances Special Purpose Vehicles Suppliers
Short on time? Let Ambulances Special Purpose Vehicles sellers contact you.
Dec-29-21
Supplier From Australia
Feb-16-23
Supplier From Australia
Dec-31-21
 
Continuous automatic industrial pusher centrifuge for salt centrifuge machine,the application of MVR energy-saving technology makes the salt heat source be the repeated use of secondary steam latent heat, improves the thermal economy of steam, achieves the purpose of energy saving and consumption reduction, and saves the operating cost and floor space of the boiler room and circulating water system, saving A large amount of circulating cooling water reduces the emission of waste gas, waste residue and waste water, and belongs to green environmental protection technology and equipment. Resources can be used to reduce costs and improve efficiency.
Dec-31-21
 
3 phase Decanter Centrifuge:

Principle of threephase decanter centrifuges is as shown in the above figure. The substance to be separated is fed by the feeding tube into the accelerating cavity of the spiral conveyor, then enters high speed running drum wall. As the light liquid, heavy liquid and insoluble solid contained in the substance have different specific gravities, the three materials are subject to varied centrifugal forces: the insoluble solid settles into the inner wall (outside) due to its highest specific gravity and subject to maximum centrifugal force; the light liquid settles maximum far away from the inner wall (outside) due to its lowest specific gravity and subject to minimum centrifugal force; and heavy liquid settles in the middle place. The insoluble solid is discharged from the solid discharge port by a spiral feeder which has relative differential speed with the drum; and the light and heavy liquids are then separated by different structures inside the machine wherein the heavy liquid is discharged by the centripetal pump, and the light liquid is discharged via the force of gravity, thus the purpose of three phase separation is achieved.
Dec-31-21
 
Shenzhou Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time.We are committed to reward you with a better quality in return for our interest in and faith toward.We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.

Description :
LW Sedimentation Centrifuge is a horizontal, continuously working and continuously spiral discharging sedimentation centrifuge. It is used in a variety or industries for separating all kinds of solid liquid suspension, defecating liquid phase with graded grains, and dehydrating sludge.
2 phase Decanter Centrifuge:
After entering into the high-speed turning drum, the solid-phase particles in the mixed liquid run and settle on the drum wallunder the action of greatest centrifugal force; the light liquid settles at the innermost place of the drum under minimum centrifugal force; same as the drum's turning direction, a screw feeder also turns at a high speed, and a constant speed difference is generated by the differential mechanism, then the liquid will be discharged by the liquid outlet.
3 phase Decanter Centrifuge:

Principle of threephase decanter centrifuges is as shown in the above figure. The substance to be separated is fed by the feeding tube into the accelerating cavity of the spiral conveyor, then enters high speed running drum wall. As the light liquid, heavy liquid and insoluble solid contained in the substance have different specific gravities, the three materials are subject to varied centrifugal forces: the insoluble solid settles into the inner wall (outside) due to its highest specific gravity and subject to maximum centrifugal force; the light liquid settles maximum far away from the inner wall (outside) due to its lowest specific gravity and subject to minimum centrifugal force; and heavy liquid settles in the middle place. The insoluble solid is discharged from the solid discharge port by a spiral feeder which has relative differential speed with the drum; and the light and heavy liquids are then separated by different structures inside the machine wherein the heavy liquid is discharged by the centripetal pump, and the light liquid is discharged via the force of gravity, thus the purpose of three phase separation is achieved.
Nov-12-24
 
Solid Liquid Separation Drilling Decanter Centrifuge For Drilling Fluid / Oil Field
Drilling mud is an integral part of most drilling operations,it is also called drilling fluid, there are some solids suspended in
the fluid. Shenzhou Decanter Centrifuge can provide solid-liquid separation technology to your drilling mud application, enabling reuse of the material and more efficient and cost-effective disposal.We have our special design and collocation decanter centrifuge for oilfield and industrial solids control, drilling fluid / mud cleaning and process water treatment. Shenzhou Decanter centrifuges are used to process water-based and oil-based drilling fluids. Oilfield decanter centrifuges mechanically increase the gravitational force exerted on the liquid and solids mixture present in the mud system. We can apply over 3,000 G-forces machine to separate the particles in the fluid. Shenzhou Decanter centrifuges have wide process capacity to meet all ranges as per drilling program.It is commonly and widely used used for oilfield and gas well operations providing efficient solids control while significantly reducing the operator's total mud cost and minimize waste disposal volumes.
Nov-12-24
 
Suppository filling production line
1. Automatic suppository production line is suitable for the production of special shapesof slugs such as bulletshape, torpedo shape and duckbill shape, which can meet the production of suppositories of various shapes. (Make a mold according to the sampleor requirement.)
2. From the beginning of the automatic suppository shell molding, to the filling station of the liquid materiel, the recip-rocating cooling setting (liquid conversion solid state), the continuous sealing, the batch number, the finished product cutting (the number of cutting particles is arbitrarily set on the touch screen,1-10 Free cutting)

One-time molding suppository for embedded type filling, filling accuracy + / - 2%, filling material barrel has electric heating
insulation system, the top is equipped with a uniform mixing machine in order to make materiel, materiel by high precision in VAT filling pump into the filling head, materiel through the other end of the cycle to rest after filling material barrel filling again next time.
Nov-12-24
 
A complete palm oil production line is a multi-stage process involving specialized equipment and techniques to convert fresh palm fruit into refined edible palm oil. We provide turnkey palm oil processing plant solutions from oil mill plant layout design to oil machinery manufacturing, onsite debugging, and installation. The palm oil processing plant capacities range from 3tph to 120tph. Our unique patented palm oil equipment and techniques are highly efficient in handling the specific properties of palm fruits and achieving maximum oil yield and quality. We have the best solutions for you in each stage, from palm sterilization and threshing to palm oil extraction and refining. We aim to offer a tailor-made palm oil production plant for every customer and guide you in mastering palm oil extracting and refining technology.
Palm fruit/bunchFFB sterilization threshing digesting clarification purification drying CPO refining bleaching deodorizing RBD palm oil crystallization fractionation RBD olein & RBD stearin
Dec-16-22
Supplier From Australia
Dec-09-22
 
a. Name of product: Manufacture & supply Urea Prilled

b. Price of the product : $440 - $550+ / MT CIF, subject to the pricing formula

c. Product origin: from Kazaks, Georgia, China, Germany, GCC

d. Key Specifications/Special Features
Chemical Name Cas No. EC No. Molecular formula Content
Urea 57-13-6 200-315-5 CH4N2O 98.7%
Biuret 108-19-0 203-559-0 C2H5N3O2 0.8%
Water 7732-18-5 231-791-2 H2O 0.5%
Industrial use only.
White particles, solid.
Slight smell.

e. Harmonization System (HS) Code : 3102100090(M/N)

f. Minimum Order Size :1 Metric Tonne

g. Packaging details: 1MT industrial bags
Sep-23-23
Supplier From Australia
Feb-07-24
Supplier From Australia
Aug-06-23
Supplier From Australia
Apr-02-25
Supplier From Australia
19 Ambulances Special Purpose Vehicles Suppliers
Short on time? Let Ambulances Special Purpose Vehicles sellers contact you.
Explore Ambulances Special Purpose Vehicles related import export discussions