Transit-time ultrasonic flowmeters, ultrasonic water meters, ultrasonic heat flow meter, doppler ultrasonic flow meter, partially filled pipe ultrasonic flow meter, open channel ultrasonic flowmeter, explosion-proof ultrasonic flowmeter, gprs systems, ultrasonic level meter, ultrasonic thickness guage, low flow meter.
Electromagnetic Flowmeter model No FMF 2500 Manufacturing Unit in Coimbatore
Features It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. Working Conditions Cold Water Temperature: 50C Water Pressure: 1MPa P < 0.03 MPa (APS Marines & Logistics)
Features Dry register and register with 5 or 8 numbered roller. Brass body can be painted or nickel coated. High accuracy. Measuring unit is m The meters conform to ISO4064 Standard Class B. Working Conditions Water temperature 30 C; hot water meter 90 C Water pressure 1MPa (PN:1.6MPa/16bar) P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% (Hot water meter: �±3%) (APS Marines & Logistics)
Description Electromagnetic Flow Meters follow the Faraday Law of Electromagnetic Induction. They are used to accurately measure the flow rate of liquids which are electrically conducting. Nominal Size: 25-200 mm Electrode Material: SS 316L Lining Material: FEP Flange Material: Carbon Steel Flow Sensor Housing: SS 316 Flow Sensor Protection Class: IP 65 Power Supply: 85VAC 240VAC Signal Output: 4~20mA Pulse Output: Adjustable from 0.001 to 1000 L Pulse Communication: RS 485 with Galvanic Isolation, MODBUS Cable Length: 5M Features No moving parts. virtually no pressure lost. Corrosion protection, abrasion resistant. High accuracy, stable performance. High level of anti-vibration and anti-jamming, wide measuring dimensions. Multi output interface: 4~20mA, Pulse, Alarm outputs, RS â?? 485 (Modbus) communication. Working Conditions Pressure Rating: PN16 Temperature Rating:
Description Water Meter for Hot & Cold water is manufactured using advanced technology, in which the register device is combinated pointers and rolling counters for convenience, clarity & correctness as well as nice appearance. The register system is designed by means of magnetic drive, which is hermetically sealed and completely separates register system from water. These water meters have high accuracy of measurement and steady error curve of flow rate. The performance is more advanced than existing ISO â?? Standard Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% (APS Marines & Logistics)
Features It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. Working Conditions Hot Water Temperature: 90 C Water Pressure: 1MPa P < 0.03MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Hot: Exclusive: + 3% Application Dismountable spiral hot water is for recording discharge, flowing through its pipe. It can not record the amount of polluted water end corrosive liquid (APS Marines & Logistics)
Description Type LXSG-15E-50E water meter for cold water is manufactured by using advanced technology, in which, the register device is combinated pointers and rolling counters which is convenient, clear and correct for reading as well as nice appearance. The register system is designed by means of magnetic-drive, which is hermitically-sealed and completely separates the register system & water. It however can not be influence even if in pure water condition as well as corrosion of indicating dial. These water meter have high accuracy of measurement, steady error curve of flow rate. The performance is more advanced than existing ISO standard. Working Conditions Water Temperature < 50 C Water Pressure < 1MPa P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Application This water meter is used for measurement of total quantity of water passing through the pipeline. It is available for water flowing in a single direction. (APS Marines & Logistics)
Description Product Standard: ISO 4064 Class B End Details: Flanges as per DIN:2533 RF (PN16) Drilled Features It is dismountable and it can be pulled out easily for repair. The recorder is sealed so that readings are clear. The pressure loss is small and it has big flow capacity. It can be installed vertically or horizontally. Working Conditions Pressure Rating: PN 1.6 (16 Bar) Hyd. Maximum Temperature: 45 C Working Pressure: 1.0 MPa Hyd. Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: +5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: +2% (APS Marines & Logistics)
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customers house, when the meter is kept away from customers reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customerâ??s house, when the meter is kept away from customerâ??s reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
Feeder of Raw meal includes steady flow feeder, mass flow meter, gas-solid injector and FB-DACS5000 control system. It has a great effect on improving the stability of kiln working conditions, improving the working time and clinker strength, saving energy and prolongs the service life of refractory materials. Accuracy: +/- 0.5% Weighing Range: 100-1200 m3/h
1.Dual SIM card(Failover mode) 2.Supports OpenVPN which rescue data security 3.Supports Mainstream cloud platform protocols(MQTT SSL, AWS IOT�¯�¼?Azure, Ali Cloud and Huawei Cloud) 4.Various I/O ports(4AI,2DI and 2DO ) 5.Quick access to cloud platform with RS485 master and support Modbus to convert MQTT 6.Automatically monitor the status of LAN port (disconnect alarm) to realize real-time monitoring of the network.
GMF200-W ultrasonic water meter is designed for water metering settlement and production of a high performance products, with the remarkable features of low power consumption, wide measuring range ratio, stable and reliable measurement .Each component reaches IP68 protection class, to ensure long term operation though water in the inside meter.
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss. The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000.
Products: 1. MULTI JET WATER METER : DN 15, DRY DIAL, CLASS B 2. MULTI JET WATER METER : DN 20, DRY DIAL, CLASS B 3. MULTI JET WATER METER : DN 25, DRY DIAL, CLASS B Accuracy : Class B Application: Cold and Hot Water Type: Dry Dial Construction Material of Meter Body: NYLON 66 Working Pressure: 16 BAR OR above Flow Standard: As per latest version of Q3 Accessories: Set of Connectors(4 pcs) and Inlet Strainer Design Standard: ISO4064
We are TRUIN robot manucfacture from China, supply industrial robot including welding robot ,handling robot and Scara robot. Payload includes: 3 kg, 10kg, 20kg, 30kg, 50kg, 60kg, 165lg, 210kg, etc.
NAGMAN Instruments & Electronics Private Ltd. Chennai, INDIA. COMPANY PROFILE & PRODUCTS INTRO Nagman is an ISO 9001:2015 Certified Instrumentation Company involved in the Manufacture of Temperature, Pressure & Signal Calibration Instruments & Systems since 1972. Our Products are exported to over 100+ Countries worldwide. Nagman had developed & introduced several Innovative & Novel Import Substitute Products including Advanced Microprocessor/Micro-Controller based Dry Block Temperature Calibrators, Micro Oil Baths, Black Body Sources etc. Several Models of our Temperature Calibrators are manufactured as perCE Norms. Select Models of our Temperature & Pressure Calibrators are DNV Certified. We are also a Member of the IMPA. In addition, Nagmans developments & introduction in the Pressure Range included Microprocessor based Precision Pressure Calibrators (upto 1000 bar), cost-effective range of Dead Weight Testers (Pneumatic & Hydraulic) (upto 1200 bar) and Comparators/Master Gauges (upto 1400 bar), Hand Pumps (OEM) - Pneumatic (upto 60 bar) & Hydraulic (upto 1000 bar). Nagman, expanding on their technical expertise on portables, developed Calibration Test Benches/Workstations- Primary & Secondary Standard Calibration Test Benches, Temperature Calibration Test Benches, Electrical & Electronics Calibration Test Benches, Multifunction/Multi-parameter Calibration Test Bench Workstations and Computer Aided Calibration Systems - comparable in design, performance, features and accuracies to reputed/established International brands. Have supplied more than 2500 Test Benches to major industries in India & Worldwide. Nagman offers its customers Complete & Comprehensive Calibration Lab Packages including Calibrators (Systems / Test Benches / Portables), integrating System Software, a wide range of Test & Measuring Instruments, Tools and Tackles etc. Nagman also offer Consultancy for Calibration Lab Setup & conducts Training Workshops on Calibration Management Techniques. Nagmans CUSTOMER BASE includes Power Stations (Thermal / Hydro & Nuclear); Oil & Gas; Petrochemicals & Refineries; Process Industries (Chemicals & Pharmaceutical, Breweries, Fertilizers, Cement, Glass, Sugar, Synthetics, Steel, Metallurgical); Heavy Engineering Industries; Marine (Defence, Merchant Ships)/Ship Building, Off-Shore Companies, Naval Dockyard; Aeronautical Industries; Educational Institutions; EPC Contractors / Turnkey Project Consultants and National Calibration Laboratories / Test Labs like IDEMI / STQC ERTL / ETDC / CSIR etc.
Micro Meter Carbon Steel Chrome Plated Specification Size (Inch.) Size MM Outer Box (Qty.) 1 25 100 2 50 60 3 75 40
0 integrated / split electromagnetic flowmeter using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also be measured acid, alkali, salt and other corrosive liquids. Widely used in chemical fiber, food, mining and metallurgy, environmental protection, steel, petroleum, pharmaceutical and other fields. The innoMag 300 electromagnetic flowmeter consists of an electromagnetic flow converter and an electromagnetic flow sensor that can be used to measure and record the volumetric flow of conductive fluids. Using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also measure acid, alkali, salt and other corrosive liquids.
