Full Auto Cool&Hot Water supply Comsist Group --Self-clean direct drinking water purifier +auto water boiler outlet water capacity: minimum 20L/h, max:210L/h Auto Adding water, auto anti-dry protection,auto keep warm ,auto water temperature indication, auto water level indication etc .auto self-clean for water purifier
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant) Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc. Operating Limits and Conditions of Membrane Element Max. Working Pressure 600 psi(4.14MPa) Max. Feed Water Temperature 45 Max. Feed Water Flow 17.0m3/h(8040),3.6m3/h(4040) Max. Feed Water SDI15 5.0 Free Chlorine Concentration of Feed Water 0.1mg/L pH Range of Feed Water during Continuous Operation 3-10 pH Range of Feed Water during Chemical Cleaning 2-12 Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
Function and service description of Seawater Desalination Plant -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis -Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter. -Automatic low speed chemical cleaning and dosing system. - Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China - World-wide aft-sales service and maintenance upon request Performance system function of RO Seawater Desalination Plant 1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm 2) Whole system under control and monitoring via PLC 3) Automatic cleaning and back-flushing system equipped for sand filter, 4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention. 5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention. 6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity) 7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention. 8) Potential-free alarm and running indication available for extension. Technical parameter of RO Seawater Desalination Plant Product: 1m3/d-200m3/day Raw water: â?¤ 3000PPM~45000PPM Inlet temperature: 5~35° C PH value of Raw W: 3.0~10.0 Boosting inlet pressure: 0.1~1kg/cm2 (Positive) Salt content of product water: â?¤ 10~600PPM Desalination rate: â?¥ 98.5% Product water pressure: â?¤ 0.3Mpa Recovery: 36% Power supply: 380VAC/50Hz/3Ï? or as request Power consumption: 18.5KW(Include boost pump) Control cabinet: 220VAC Control voltage: 220VAC IP: IP55 Potential-free extension for running indication and common alarm available. Motor: IP: IP55 Insulation class: "F" Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm Weight: Dry weight 2500kg
Applications Marine sewage treatment plant belongs to the key devices for prevention of prollution form ships in seas and oceans according to the revised Annex IV of the International Convention of the Prevention of Pollution(MARPOL 73/78).This device is applicable to treat the sewage,which means human body wastes and the wastes from the toilets on vessels and which is also called "black water". The device also can be used in terrestrial sewage,besides in ship vessels and oil platform.The water quality after treatment can reach the national reuse water quality requirements.It's also applicable to treat the galley,shower drainage which is called"gray water" on condition that the "gray water" is pretreated and these should select a bigger capacity model to match with. Features CCS,BV,EC Approved IMO MEPC.227(64) Resolution Meet resolution of MEPC.227.(64) enacted on Jan.1, 2016. Used for seaport,dock,industry,petroleum ,various vessels Description The Sewage treatment plant adopts the principle of Activated Sludge,Bio-contact Oxidation and Membrane Biological Reactor(MBR) to digest organic pollutant.MBR can treat organic pollutant efficiently,drastically and cleanly to ensure the effluent can meet the requirements of the resolution MEPC.159(55) and other much harsher requirements. Specifications 1.Adopting horizontal circular design,ellipse closures on both ends,pressure resistance and compact structure 2.The device is adopted auto-control,and compliance with the requirment of 24h unattened cabin. 3.Adopting the "MBR" technology,devices allow to the narrow size,and solve the conflict of small space of carbin,but big volume of device. 4.The intermittent aeration in bio membrane tank and hollow fiber membrane tank,form the process of "aerobic-anoxic",and resolve the problem of "nitrogen and phosphorus removal. 5.The device is adopting the principle of "air lifting" to transfer the sludge from sediment tank and membrane tank to aeration tank,meantimes the "pump stops and air never stopped",so as the scale on the membrane surface comes dowm.Due to back flushing and clean the membrane "online" usd technol;oge patent. 6."Online" cleaning technology,making the dirt on membrane off automatically,recover membrane flux.It can be solved the problem of openning the cleaning or replacement of the membrane difficultly caused by the small space in cabin. 7.The effluent after further treatment can be reached at the requirment of "water recov
Bases on the latest technology, to create a high effective disinection unit for drinking water, we developed UIV series UV-sterilizer, which covers wide capacity for reaching different applications in industry and marine fields. Main features of UV-sterilizer - Stainless steel chamber with no corrosion - Long life UV lamp up to 8000 HRS -User friendly interface with PLC for easy operation and understanding -UV lamp status monitoring system indicating clearly which lamp to the change Model UIV-1.3 UIV-4 UIV-10 UIV-20 UIV-30 UIV-50 Capacity 1.3 4 10 20 30 50
Specifications and other Attributes about this H2O Elite EWC 350 Water Descaler:- A. Body Construction : Strong B. Condition : Good C. Performance : Excellent D. Strength : High E. Maintenance Cost : Less F. Operation Type : Easy G. Durability : Long Time Period H. Source of Power : Electric
Details about this H2O Elite EWC 2000 Water Conditioner:- Product Type : Electronic Descaler Application : Residential, commercial, Industrial Condition : New H2O Elite EWC 2000 Water Descaler became the first and only electronic descaler to be successful in the residential, commercial and industrial markets. Many of the worlds largest companies use H2Oelite to solve their hard water problems without the need of salt, chemicals or maintenance.
Features and Specifications about this H2O Elite Electronic Water Conditioner - 150:- 1. Condition : New 2. Body Design : Sturdy 3. Performance : Stable 4. Maintenance : Low 5. Power Source : Electric 6. Durability : Long Term
Function and service description of Seawater Desalination Plant -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis -Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter. -Automatic low speed chemical cleaning and dosing system. - Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China - World-wide aft-sales service and maintenance upon request Performance system function of RO Seawater Desalination Plant 1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm 2) Whole system under control and monitoring via PLC 3) Automatic cleaning and back-flushing system equipped for sand filter, 4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention. 5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention. 6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity) 7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention. 8) Potential-free alarm and running indication available for extension. Technical parameter of RO Seawater Desalination Plant Product: 1m3/d-200m3/day Raw water: â?¤ 3000PPM~45000PPM Inlet temperature: 5~35° C PH value of Raw W: 3.0~10.0 Boosting inlet pressure: 0.1~1kg/cm2 (Positive) Salt content of product water: â?¤ 10~600PPM Desalination rate: â?¥ 98.5% Product water pressure: â?¤ 0.3Mpa Recovery: 36% Power supply: 380VAC/50Hz/3Ï? or as request Power consumption: 18.5KW(Include boost pump) Control cabinet: 220VAC Control voltage: 220VAC IP: IP55 Potential-free extension for running indication and common alarm available. Motor: IP: IP55 Insulation class: "F" Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm Weight: Dry weight 2500kg
General description Subject technical proposal specify requirement technical details, supply scope, testing scope, testing standard, packing, delivery and aft-sales service. Availability The technical proposal specify design scheme, inspection protocol, and to be confirmed as attachment of contract. System requirement 2.1 Subject proposal relates the flow diagram, which comply with standard requirement of customer. 2.1. 1 Fresh water standard comply with WHO 2.1. 2 Capacity: =20m3/D 2.1. 3 Salt content: 600mg/L 2.2 Subject proposal conclude with follow requirement. 2.2.1 Raw water: Sea water 2.2. 2 Other basic design condition related Model of Reverse Osmosis: One stage Reverse Osmosis Purpose: Marine and offshore Power supply: 380VAC, 50 Hz, 3P Function and service description -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis Cleaning and fore & back flushing system with compressed air acceleration of sand filter. Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant) Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc. Operating Limits and Conditions of Membrane Element Max. Working Pressure 600 psi(4.14MPa) Max. Feed Water Temperature 45 Max. Feed Water Flow 17.0m3/h(8040),3.6m3/h(4040) Max. Feed Water SDI15 5.0 Free Chlorine Concentration of Feed Water 0.1mg/L pH Range of Feed Water during Continuous Operation 3-10 pH Range of Feed Water during Chemical Cleaning 2-12 Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
low pressure ro machine
Ro membrane 4040
Ro membrane 8040
NF membrane 4040
Whole waste water treatment includes sludge feeding system,flocculant adding system,dewatering system,filter cake delivery system and PLC control system. The main equipment of sludge dewatering complete system is decanter centrifuge.There are basically two application types in the wastewater treatment industry for the decanter centrifuge: sludge thickening and sludge dewatering duties.Also .it can be used for Sludge classification and Sludge clarification. With the decanter centrifuge,it is possible to separate the particles from suspending liquid with equivalent diameter bigger than 0.003mm,solid-liquid weight ratio less than 10% or volume ratio less than 70%,difference in specific gravity bigger than 0.05g/cm3 Applications: Sludge dewatering complete system could be used in the following fields: Municipal sludge treatment,paper mill sludge,starch factory waste water treatment,stell mill sludge,printing and dyeing mill sludge,water works sludge,pharmaceutical waste sludge,PVC sludge,sewage desulfurization sludge,grain stillage,power plant ash sludge,dairy sludge,beer sludge,drilling fluid ,electroplating liquid,fermented liquid manure,oil refining sludge,soap sludge,leather sludge and etc. My Email:shenzhou61@126.com Mobile:8618041915856
This machine consists of a pair of rollers with diamond groove, rack and transmission system. By the relative movement of the front&back rollers, the machine presses and flatten the raw material, dewatering the rubber and removing the impurities. Due to different speeds between the two rollers, the raw material is pressed to crepe sheet with honeycomb surface. The machine is very easy to operate and is with the features of compact structure, high efficiency, low noise and low power consumption etc.
Concept of UF system: UF system refers to ultrafiltration system. Application: UF system applies to food, beverage, chemical industry, also can be key unit of water purification device in community, industrial park, etc. Features: 1) Food-grade stainless steel 304 for the parts in contact with water, meet the food industry standard. 2) PLC automatic control with world famous brands like Mitsubishi, Siemens, Omron, etc., good stability. 3) Water pumps with world famous brands like Grundfos, CNP, etc., good stability. 4) UF membranes with world famous brands like Toray, Dow, Hydranautics, etc., good stability. 5) Standard machine parts, easy to do maintenance work, greatly reduce the maintenance costs and improve work efficiency. 6) Emergency stop and other safety features provide unparallel operator safety. 7) All parts and service plans available. UF water purification equipment, Machine specifications are as below: 1 Water Pump CNP brand or Grundfos brand [Optional] 2 Tank/Vessel Stainless steel 304 or Fiber glass [Optional] 3 UF membrane DOW/Hydranautics/ Toray or Equal brand [Optional] 4 CIP system CNP brand or Grundfos brand [Optional] 5 PP filter Stainless steel 304 or Fiber glass [Optional] 6 PLC control Omron/Mitsubishi/Siemens brand [Optional] 7 Electronic component Schneider brand [Optional] 8 Pipeline Stainless steel 304 or U-PVC [Optional] 9 Production capacity 8000L/H
Pro bac ae100 is a blend of essential micronutrients that nourishes the essential bacteria within a wastewater or sewage treatment system. By stimulating and strengthening these microbes, the product helps to increase the rate at which organic effluent can be broken down. Pro bac ae100 Improves mlss settling in the clarifier. Increased bod degradation by higher metabolism. Increases capability for sustaining bod shock loads. Increases capability for sustaining flow based shock loads. Increases break down of complex compounds into simpler forms
Y4000 Multiparameter Water Quality Sonde Overview Y4000 second generation Multiparameter Water Quality Sonde with integrated wiper system is an easy solution for in-situ water quality monitoring for rivers, lakes, streams, estuaries, or oceans. The wiper can effectively clean debris, bubbles and prevent bio-fouling for extended instrument deployment. All calibration data is saved in sensor memory and the system supports sensor field calibrations and field exchange. Total of 7 parameters (6 sensors) can be measured simultaneously, which include DO, CT, Turbidity, pH, ORP, Chlorophyll, Oil-in-Water, and NH3. Y4000 Multiparameter Water Quality Sonde Key Features * Digital sensors, support RS485, MODBUS *All calibration data is stored in sensors, sensors can be replaced in field easily * With integrated anti-fouling wiper for extended period of deployment * Optical DO, 4-electorde CT, Turbidity, pH, Chlorophyll, BGA and many other digital sensors can be chosen * Support 6 sensors, measure 7 parameters simultaneously
