This automated ball fiber machine is used for polyester ball fiber making, opening and filling into pillow, cushion etc. High degree of automatic, adopt PLC control system and auto clamp, so whole line only need 2 operators, save labor cost, simple operation and reduces the dependence for operators. Main technical parameter: 1.Capacity:250-300 kg/h 2.Dimension:4950X2220X2500mm 3.Voltage:380V 50Hz 3phase 4.Power:13.95kw 5.weight:1100kg. Wooden case.
The toy stuffing machine is used for pillows, cushions and sofa pads, large size plush toys soft stuffing productions. The suitable material is 2 or 3 dimensional hollow conjugate siliconized polyester fiber that shorter than 100mm length. Automatic raw material feeding conveyer sends the raw material into the opening component automatically which will save a big labor cost. Main technical parameter: 1.Capacity: according to the filling weight and production material difference 2.Dimension: 3000X2500X2500mm 3.Voltage: 380v 50Hz 3phase 4.Power: 3kw 5.Weighing error: 1g 6.Air pressure: 0.5-0.8MPA.
This pillow filling and sealing machine has been researched and developed according to our customers experience and advise from their daily operation, so and their requirement; also based on the automatic theory of the textile equipments. Main technical parameter: 1.Capacity: 7pcs/min, 360-420pcs/h 2.Installation area: 13000X5000X2300mm 3.Mixer capacity: Continuously by the opened feeding storage. 4.Power: 15.6kw 5.PLC: Siemens brand, More option: AB, Omron 6.Air pressure: 0.2Mpa 7.Operator need: 1 operator 8.Weight: 4.2MT. Wooden Case.
Technical Specifications: Cutting length: 180-220cm Cutting width: 160-220cm Cutting thickness: up to 6.5cm of compressed fabric. Max speed: 100m/min Acceleration: 1g 9KW+15KW Operating Temperature: 10¡ãC-40¡ãC Operating Humidity: 30%~80% Weight: 4000kg Main Features & Functions: Digital control of all components, to obtain maximum precision and possibility of feed back in real time Self-learning system to obtain automatically maximum efficiency Possibility to optimize energy consumption Auto-diagnosis system to identify and advice eventual errors or anomalies Clever vacuum system to maintain automatically the level of suction required, improving the cutting quality and optimizing the consumption Washable filter for vacuum pomp Automatic calculation of cutting window and route optimization Full compatibility with other systems by standard file ISO/ANSI Two ways off-loading conveyor User interface easy and intuitive with possibility to display in real time cutting process and production data.
Laser engraving & cutting machine is used to cut cloth, leather, rubber, wooden product, bamboo, crystal, Plexiglas, ceramic tile, jade, resin, acrylic and other materials. With imported components and advanced design, Laser engraving & cutting machine performs perfect functions: 1 High cut precision: the max deviation
* Efficient inspection of medium & heavy quality fabric. * Efficient inspection through top & bottom illumination. * Tensionless movement of fabric on inspection table. * Full forward & reverse run of fabric. * Speed variable from 0 v 50 mtrs/ min. * Compact & crease free rolling on winding tubes. * Max. Roll dia. Up to 1000 mm. * Length measurement by reputed counter meter. * Straight & uniform roll winding through efficient selvedge guider. * Operator friendly, improves productivity reduces labour.
Perfect Rolling:- * Speed variable from 0 to 50 mtrs/ min. * Compact & crease free rolling on winding tubes. * Max. Roll dia. From 300mm to 1000mm. * Length measurement by reputed counter meter. * Straight & uniform roll winding through efficient selvedge guider. * Operator friendly, improves productivity, reduces labour.
Fabric sample cutting machine:- * Most accepted machine for small swatch and sample cutting * Sizes available from blade width 14 inches up to 32 inches * Equipped with 1 no. Serrated blade and 1 no. Cutting board * “polyurethene” cutting board for extended life of blade * Safety is equipped with p.L.C controls for two-hand safety operation. * Model ‘perfect cut’ is equipped with electro mechanical drive. * Solidly built table is provided with millimeter graduation * Machines manufactured following the safety classes of eu. * M.S. Rigid frame to with stand vibration * Maximum of 2 inches of fabric sample can be cut in one quick cycle * Proxy sensor mechanism provided to hault the machine automatically after single blade stroke * Blade reverse & forward provision to set the blade at desired cutting point * Most economical machine in its range.
A186L Production rate (g/m): 3.5-6.5 Output (kg/h): 40 Working Breadth (mm): 1020 Multiple of Elongate: 67-120 Working diameter of licker-in (mm): 250 Working speed of licker-in (r/min): 980(for man-made fibres) 1070(for cotton) Working diameter of Cylinder (mm): 1289 Working speed of Cylinder (r/min): 330(for chemical fibre) 360 (for cotton) Working diameter of doffer (mm): 760 Working speed of doffer (r/min): 21.3-38.2 Root of cover plate (working cover plate/total no. of cover plate): 40/106 Speed of cover plate (mm/min): Purified Cotton 177 214 266 Chemical fibre 81 98 122 Applicable cotton item canister (mm) (diameter¡Áheight): ¦Õ600¡Á900/¦Õ600¡Á1100 Dust cleaning apparatus: Cylinder, doffer trigonal area, licker-in cover, Air volume(continuously): 1300cube meter/h Air pressure: 500-600pa Total power: 4.4kw Size (length¡Áwidth): 3809x2092mm Weight (ton): About 4.5 ton Safe seaworthy package
Character & Power: Machine Width: 1.6, 1.8, 2.2, 3.0m Roll weight (Maximum): 100kg Roll diameter (Maximum): 60cm Spreading height: 25cm Maximum speed per minute: 80m Operator side: Right (Normal)/Left Voltage: Single phase, 220v/50Hz Power supply: 1.7kw Standard Equipment: Loosing Fabric Device Automatic loading and unloading rolls Automatic Edge Controlling Device Automatic lifting Device Automatic Fabric Cutting Device Spreading Layers Counter Clamp Device Digital Touch Screen Security sensors emergency stop Other technical characteristics Ability to program all steps in a spread Diffuse reflection sensor ensure fabric edge alignment Encoder counter ensure high accuracy Automatic start checks control when machine is switched on Four-wheel drive (2*2) Self-adjusting brakes ramp according to speed of machine and programmed acceleration Stop when material is used up Spreading any kind of fabric: Knitting fabric and woven fabric Unidirectional cutting spreading and Zigzag spreading Optional Devices Folding platform Zigzag device & fixed clamp together Air-blowing table Power track Operator platform Mobile table Automatic loading device Unfolding/spreading device.
Specifications: Model RP-MJ135 RP-MJ180 RP-MJ220 RP-MJ300 Max. plotting width 138cm 183cm 223cm 303cm Max. paper width 140cm 185cm 225cm 305cm cartridges 24 Receiving paper system Automatic paper receivin Max paper weight 35kg Max plotting speed 72square meters per(two cartridges), 140square meters per(four cartridges) Ink box type HP45 ink box Plot precision 0.025mm Paper 30-120g paper Communication USB port, LAN port Data format HPGL Motor type Servo motor Power AC220V(110V)/50Hz+10% Storage temperature -20-50 Working temperature 0-40.
55 sulzer weaving machines TW11 153" ES 105 e10 cam off loom take-up w/press roll, 6 harness frames, 1 beam per loom, dropwires and heddles as fitted.
Al-hamd enterprise, is pleased to offer you the below; brand new, high quality pp spunbond nonwoven production line. More than 80% of Chinese textile companies are using this brand. Application The line is used to produce PP nonwovens through spinning, web forming and solidifying by calender. The products can be used in the fields of health care, hygiene, hospital aprons, kitchen aprons, kitchen towels, construction fabrics, waterproofing material, used in bedsheets & handbags, packing material, geotextile or household material, such as disposable and wearable material. Main Technical Data Width: 1600mm, 2400mm, 3200mm Titer of single filament: 1.8 dtex - 2.5 dtex Output: Single beam: 1500 tons/anum ~ 3000 tons/anum Double beam: 3000 tons/anum~6000 tons/anum Web Weight: 10g/m² - 150g/m² Mechanical speed: Single beam: 150m/min Double beam: 210m/min~350m/min Process Flow Polypropylene (PP)chips and additives -> dosing and mixing device -> screw extruder -> (extruding, melting and filtering) -> spinning machine -> cooling and drawing system web spreading machine -> calender -> winding machine -> splitting machine -> finished product. Features -- Suction, dosing and mixing device is controlled by inverters with high precision and reliability; automatic alarm is realized in case of unsuitable material level. -- Screw extruder adopts high-precision helical gear reducing box and tri-closed loop electrical control, so that it works at high precision, high reliability, high safety, and long service life. -- Melt distribution line is heated by electricity and wrapped with insulation material, which features short melt flow distance and automatic control for heating system. -- Spin beam is of integral slot structure with special melt distribution chamber to ensure even melt distribution. The integral spinneret is adopted to achieve uniform filament distribution. -- Quenching system adopts double-sided symmetric blowing structure, in which the air duct is fixed with multi-layer air rectifying device. -- Drawing duct adopts slot type, in which the filament is drawn by air flow, with the widths of the lower drawing duct and the diffusion duct being adjustable. -- Web spreading machine comprises main driving system, traveling lattice, frame, suction duct, correcting device, tension device and son on. -- Suction duct and diffusion duct are separated with the surroundings by brush and sealing roller, which forms a single control system to meet the requirements of different processes. -- Recycling system.
Single carriage single system. Digital technology is adopted to realize transfer, tuck, pointelle, jacquard, open narrowing and other regular patterns. Basic knitting fabric, multi-color irregular jacquard, cabling and other weft knitting fabrics can be knitted. It is applicable to weaving sweaters, coats, scarves, caps and cloth accessories which are made of real silk, spun silk, compound silk, wool, acrylic, etc. Size 2.6,0.95,1.89M Packing size: 2.9,1,1.8M N.W/GW:1150KG/1650KG Power:1.5KW.
Single carriage three system. One working system is added on the basis of the double system. Three system can work together or individually, thus improving production efficiency greatly. It is designed for jacquard fabrics and shows higher work efficiency. It is applicable to weaving coats, scarves, caps, artware and cloth accessories which are made of real silk, spun silk, compound silk, wool, cashmere, acrylic, blends, yarns, etc. Size 2.9,0.95,1.85M Packing size: 2.9,1,1.8M N.W/GW:1300KG/1800KG Power:2.0KW.
Single carriage double system. This series is the computer flat knitting machine with take down comb. Advanced scissors, clips and take down comb are added on the basis of the double system series. The machine includes two scissors and four clips which are controlled by the six motors separately. The program instruction can be executed simultaneously or separately to increase the production efficiency and reduce the waste of yarn. The take down comb adopts closed U type compound needle to hold and knocks over the yarn reliably. Size 2.9,0.95,1.85M Packing size: 2.9,1,1.8M N.W/GW:1350KG/1850KG Power:1.7KW.
Single carriage three system. This series is the computer flat knitting machine with take down comb. Advanced scissors, clips and take down comb are added on the basis of the three system series. The machine includes two scissors and four clips which are controlled by the six motors separately. The program instruction can be executed simultaneously or separately to increase the production efficiency and reduce the waste of yarn. The take down comb adopts closed U type compound needle to hold and knocks over the yarn reliably. Size 2.94,0.95,1.85M Packing size: 2.9,1,1.8M N.W/GW:1400KG/1900KG Power:2.0KW.
