1. This model is suitable for different kinds of textile, non-woven material, industrial materials precise cutting. If equipped with the auto-feeder, it can ensure continuous and automatic cutting process with batch of production.
2. With upper and nether exhaust system, it ensure the cutting process clean without pollution.
Technical Parameter
Laser type : CO2 laser generator
Laser power : 40W, 70W, 100W, 150W Optional
Cutting area : 1600mm*3000mm each head working area 2500mm*10000mm,The four heads can cut simultaneously
Cutting table : Vacuum absorb conveyor working table
Cutting (No-load) speed : 0-36000mm/min
Repeating location : 0.2mm
Cooling system : Professional constant temperature water chiller for laser cutting machine
Moving system : Servo system, safety alarm system, embed offline control system
Laser power adjustment : Following laser power adjustment
Power supply : AC220V, 5%/50Hz
Format support : AI, BMP, PLT, DXF, DST etc,can meet demand for most of garment CAD design output in time
Standard collocation : Up exhaust filtration system, assisted air-compressor
Select collocation : Outside exhaust pipe, auto feeder system CCD Camera Mark device
*Cutting area and laser cutting power can be customized according to requirement.*.
Working range Polyster yarn
Reed width (cm) Nominal:150, 170, 190 , 210, 230 260, 280 330 360
Useful reeding width:reduct 0-60cm
Filling selection 1 color 2 color at will
Weft density rang 6-60pick/cm
Motor 3.5kw, 4.6kw selected according to the certain model
Shedding Plain type 2-8pcs heald frame
Positive cam machine, 4-10pcs heald frame
Dobby(mechanical), upper negative dobby or electronic dobby, 2-16 heald frame (according to customer¡¯s demands)
Let-off Electronic let off-elo
Mechanical let-off
Flange diameter:800mm
Take-up Mechanical take-up
Electronic take-up
Upper and down temple(according to the varity of fabric)
Waste filling removel Mechanical take-up 3 roller
Cutter Mechanical cutter
Operation Start ¨c driven by rush start motor.Stop by electromagnetic brake at prgrammed position
Arrange, run, forward inching, reverse inching, programmed position stop after
One cycle reverse rotation.
Beating Crank beating, sword beating system oil bath lubrication system.
Filling insertion : Single pump (plunger type spring pressure system)
Double nozzle (needle type ceramic ) stbilizer system
Feeler ¨c ir feeler or opf feeler, using optical cable.
Yarn package stand Floor mounted horizontal stand for ¨c 4 package.(2 colour )
Catch cord Spindle twisting system.
Temple Top mounted, 2 barrel type with 2 ring each.
Water suction Slit tube suction (blower type ).
This series machine are new and improved models,desighed to increase overall machine architecture to expand the beams supporting area,machine stabilty.
Models can be matching pairs of single pump spray dual punp,dual jet ,double pump ,three jet ,e-free jet weft selection ,cam shedding ,dobby shedding .
2.
water jet loom Main technical parameters
Oprional rate:Maximum 2280m/minute
Number of heald frame piece:
a)Plain loom up to 8
b)cam openings loom 2,4,6,8,10 film
c)a maximum of 16 Dobby Loom
Installed power:3.5kw,4.6kw
Weft density range:6-60pick/cm
Speed:the designed maximum speed 1200rpm/min(actual speed according to the fabric sizing)
For yarn type:
(1)nylon filament(2)nylon with wire-free pulp(3)multi-resin raw silk(4)Multiple lipid retractable wire(5)Multiple lipid rayon(6)multi-resin hard twist yarn(7)Multiple lipid extension wire (8)Multiple lipid-free pulp with silk(9)elastic fiber yarn (10)lmitation silk cotton.
Product name YETEK Digital T-Shirt Printer
Model YTJ-330
Net Weight 28kg
Volume 1000mm(L)¡Á565mm(W)¡Á400mm(H)
Package size 1100mm¡Á665mm¡Á500mm
Printing method Micro Piezo Head)
Ink(water based) CMYKLmLc (or CMYK+WW) ; Cyan+Light Cyan+Magenta+Light Magenta+Yellow+Black (or CMYK+2whites)
Ink tank volume 220ml
Output size(Max) 329mm¡Á483mm(super A3)
Printing direction Artificial intelligence type ,bi-direction
Printing speed Colortext 9ppm(A4), Full Color 1.3ppm(A4, 360dpi)
Interface IEEE 1284 compatible 8bit parallel interface (Nibble mode supported)
USB interface
Environmental condition Temperature 10~35 degree, Humidity 20~80%RH
Control code EPSON ESC/P Raster
Editing S/W Photoshop, Corel draw, illustrator, etc
Print S/W(for textile or Dark color) YETEK RIP S/W
Printing supply method YETEK standard supply method
Material used T-shirt, Garments(Clothes), Paper £¬Carton, etc
Preprocessing process Only for dark textile printing
Rated power used AC 220V/110V, 15W(in power saving mode 2.5W)
Printer driver Windows 95/98/2000/XP, VISTA, Win7, NT4.0, Mac OS(USB)
Package method Carton
The term of quality guarantee 1year (excluding printhead)
Product name YETEK Digital T-Shirt Printer
Model YTJ-330
Net Weight 28kg
Volume 1000mm(L)¡Á565mm(W)¡Á400mm(H)
Package size 1100mm¡Á665mm¡Á500mm
Printing method Micro Piezo Head)
Ink(water based) CMYKLmLc (or CMYK+WW) £ºCyan+Light Cyan+Magenta+Light Magenta+Yellow+Black (or CMYK+2whites)
Output size(Max) 329mm¡Á483mm(super A3)
Printing direction Artificial intelligence type ,bi-direction
Printing speed Colortext 9ppm(A4), Full Color 1.3ppm(A4, 360dpi)
Interface IEEE 1284 compatible 8bit parallel interface (Nibble mode supported)
USB interface
Environmental condition Temperature 10~35 degree, Humidity 20~80%RH
Control code EPSON ESC/P Raster
Editing S/W Photoshop, Corel draw, illustrator, etc
Print S/W(for textile or Dark color) YETEK RIP S/W
Printing supply method YETEK standard supply method
Material used T-shirt, Garments(Clothes), Paper £¬Carton, etc
Preprocessing process Only for dark textile printing
Rated power used AC 220V/110V, 15W(in power saving mode 2.5W)
Printer driver Windows 95/98/2000/XP, VISTA, Win7, NT4.0, Mac OS(USB)
Package method Carton
The term of quality guarantee 1year (excluding printhead).
In firm carton.
5581 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
Features:
1.The coiling machine produces bonell type spring from steel wire. It is completely mechanical .
2.In a single production cycle, the wire is coiled to spring, knotted at both ends and heat treated.
The machine can make different coils springs for mattresses according to different heights and features.
3.A different wire diameter can be used to achieve a different degree of rigidity of springs and spring units.
Technical data:
Spring type Bonell spring
Capacity 65 springs / minute
Spring outer dia. 65-85mm
Steel wire dia. 1.8-2.5mm
Spring turns 4-8turns
Weight 1500kg
Power requirement 380v/220v, 50hz/60hz.
1.It is suitable for mattress panel, mattress pad,bedspreads,comforters,bedding ,upholstery and more.
2.New fabric loading design, easy loading material.
3.Tilted body design, easy to operate and maintain.
4.Thread brake detector.
5.Using air cylinder for thread cutting tail length.
6.Operated using high quality sealed bearings that do not need lubrication.
7.Adjustable presser foot lifting mechanism enables you to quilt a broad range of material thickness.
8.Emergency safety devices.
9.Improved quilting software control system allows more precise and stable quilting operations.
10.CAD pattern drawing pattern system allows you to create your own designs.
11.Machine comes with 100-300 design patterns.
12.Error problem detection system.
13.Pattern compensation.
Model SS-2500
Size (length*width*height)5100*1500*2000mm
Weight 4500kg
Quilt width 2450mm
Rotation speed 600-1200RPM
Production speed 80-230m/h
Needle type120/21,140/22,160/23,180/24
Needle arrangement (50.8,76.2,127)(76.2,76.2,152.4)
Max.horizontal movement 450mm
Needle space 25.4mm
Power supply 380v/220v 50Hz/60Hz
Stitch size 2-7mm
Quilting thickness ¡Ü80mm
power 7kw.
Features:
1.The machine is mainly used for taping edge of mattress panel and soft cushion.
2.Rather than moving around, the head is fixed but can move up and down to adapt to different height of mattress.
3.The angle of the head is adjustable.
4.When working ,the conveying belt drives the mattress to proceed. when one side is finished ,the machine can turn 90 degree automatically to start taping the next side .
5.The taping of the corner is finished while turning.
6.When the top four sides are completed ,the machine can turn the mattress over for taping the other four sides.
7.The machine needs only one person and there is no need for him to move around or overturn the mattress manually.
8.The machine is with a higher efficiency and need less labor .
Technical data:
Mattress thickness:150-420mm
Head lifting range:125-450mm
Table size:2000*3950*900mm
Machine size:2380*1830*1650mm
Power supply:3-phase,380V,50HZ
Total power:3KW
Air supply 0.7-1.0 mpa
Total weight:1300KG
Capacity :18 units /h.
Spring type : Barrel and cylindrical
Spring diameter : 45-60mm
Waistline of spring : 55-75mm
Spring wire gauge : 1.6-2.3mm
Pocket spring height : 70-110,110-150,150-210
Spring height before bag : 100-130,140-170,180-250
Non-woven fabric width : 260mm-600mm
Non-woven fabric thickness : 55-100g/m2
Non-woven fabric diameter : Max .500mm
productivity : 47pcs/min
Power requirement : 380v 3p or 220v 3p
Motor power : 5.5kw
Control system : PLC control and operator's panel ,can set number of springs for cutting.
pocket spring machine comprises : Spring coiling device
Heat treatment with cooling channel
Fabric folding device
Ultrasonic welding units
Wire swift for reel up to 1000kg with automatic speed control and safety system.
Features:
1.This machine is for assembling bonnell springs.
And this machine can be operated by one person efficiently.
2.Coils upper and lower springs together at same time automatically.
And spring rows can be set on the computer .
3.Helical wire is coiled, cut ,and clamped at both ends automatically and spring units can be
ejected automatically when the number of set rows is achieved.
4.Accept different steel wire gauge, spring end ring, spring height and produces
spring units within a certain limitation.
5. The springs are manually inserted and, at the end of each row, the operator presses the pedal and starts the assembling cycle.
6 The machine is equipped with one set of jaws, to be chosen among those indicated in the technical data.
Spring type Bonell spring
capacity 80sheets/8 hours (1.8m*2.0m)
Spring steel wire gauge 1.8mm-2.4mm (option 2.5mm)
Spring height 80-190mm (option 190-210mm)
Max width 2m
Helical steel wire gauge 1.3-1.5mm (option 1.6mm)
Jaws specification 68mm jaws Spring dia.:62-70mm
78mm jaws Spring dia.:68-75mm
88mm jaws Spring dia.:75-82mm
98mm jaws Spring dia.:82-95mm
Total power 3kva
weight 990kg
power requirement 380V/220V,50HZ/60HZ.
This line is the professional manufacturing non-woven fabric equipment. Our company conjugates overseas advanced technology and domestic producing situation, gives a sober assessment of the situation, developed autonomously into the professional equipment. It is featured by lower investment, compact construction, small area, simple production technology, simple operation, saving of labour and widely compatibility and so on.
Application
The equipment produces non-woven fabric with polypropylene (PP), adopts the technology of air drawing into webbing by negative pressure, make into PP spun bond non-woven fabric, and the product is featured by uniform cover, great intensity, good breathable feature and good feeling and so on. It has been in wide use in medical and protective products, household and hotel accessories, beauty care disposable product. Agricultural cover, clothes package and architecture and so on.
Product Description
This line is the professional manufacturing non-woven fabric equipment. Our company conjugates overseas advanced technology and domestic producing situation, gives a sober assessment of the situation, developed autonomously into the professional equipment. It is featured by lower investment, compact construction, small area, simple production technology, simple operation, saving of labour and widely compatibility and so on.
Application
The equipment produces non-woven fabric with polypropylene (PP), adopts the technology of air drawing into webbing by negative pressure, make into PP spun bond non-woven fabric, and the product is featured by uniform cover, great intensity, good breathable feature and good feeling and so on. It has been in wide use in medical and protective products, household and hotel accessories, beauty care disposable product. Agricultural cover, clothes package and architecture and so on.
Technical Advantages
1) The whole line is well-structured and easy to operate.
2) The whole line is highly automated.
3) Control elements are of well-know make, high performance and reliable technologies.
4) The whole line are controlled by PLC and operated with touch-screen.
5) The allocation of the main frame and auxiliary equipment can be special designed and adjusted according to customers requirement.
Product Description
This line is the professional manufacturing non-woven fabric equipment. Our company conjugates overseas advanced technology and domestic producing situation, gives a sober assessment of the situation, developed autonomously into the professional equipment. It is featured by lower investment, compact construction, small area, simple production technology, simple operation, saving of labour and widely compatibility and so on.
Application
The equipment produces non-woven fabric with polypropylene (PP), adopts the technology of air drawing into webbing by negative pressure, make into PP spun bond non-woven fabric, and the product is featured by uniform cover, great intensity, good breathable feature and good feeling and so on. It has been in wide use in medical and protective products, household and hotel accessories, beauty care disposable product. Agricultural cover, clothes package and architecture and so on.
Technical Advantages
1) The whole line is well-structured and easy to operate.
2) The whole line is highly automated.
3) Control elements are of well-know make, high performance and reliable technologies.
4) The whole line are controlled by PLC and operated with touch-screen.
5) The allocation of the main frame and auxiliary equipment can be special designed and adjusted according to customers requirement.
Product name Digital all-purpose (flat-bed) printer
Model PSTJET 200
Weight 32kg
Printing method Ink-jet (Micro Piezo Head)
Ink Cyan, Light Cyan, Magenta, Light Magenta, Yellow, Black
Output size 335mm * 487mm(Max)
Printing direction Artificial intelligence type two-way method
Printing speed Color text 9ppm(A4), Full Color 1.3ppm(A4, 360dpi)
Interface IEEE 1284 compatible 8bit parallel interface (Nibble mode supported)
USB interface
Environmental condition Temperature 10~35 degree, Humidity 20~80%RH
Control code EPSON ESC/P Raster
Editing S/W Photoshop, Corel draw, illustrator, etc
Print SW YETEK RIP SW
Printing supply method YETEK standard supply method
Material used Acryl, ID card, ballpoint pen, mobile phone, metal product, plastic
Preprocessing process Coating of chemicals for adhesion of ink
Rated power used AC 220V, 15W(in power saving mode 2.5W)
Printer driver Windows 95/98/2000, NT4.0, Mac OS(USB)
The term of quality guarantee 1year (excluding head and vacuum cleaner).
Auto doffer for ring spinning frame and twisting machine for improving doffing efficiency and saving labor. Machines fit for most of the ring frame like Chinese FA series, EJM series, DTM series, Rieter, Toyoda, Zinser and Indian Laxmi. We have electrical and manual typeÆs auto doffers for choice. Main characteristics: A. Short doffing time: 25~35 seconds per 220 spindles. B. With security power voltage (for electrical type only, without power, electrical type still works as manual type). C. Light, small, high level automatic, easy operation and simple maintenance.
Automatic bobbin winder feature :
1.Dm-2a automatic bobbin winder is specially designed to produce small bobbins for embroidery machines.
2. It is applicable for different counts of yarn, such as 40/2, 60/2, 75/2, 70/2, 80/2 of polyester yarn, cotton yarn, high stretch yarn and mercerized yarn.
