TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery
Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery
Product Description
Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring.
Technical Specifications
Production Output (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Speed in r/min: 740 r/min
Blade extension from grid in mm: 2.5 - 7.5 mm
Rail Diameter in mm: 5132 mm
Total Height in mm: 3864 mm
Power in Kw: 4.1 Kw
Weight in Kg: Around 1600 Kg
Product Description
Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process.
Technical Specifications
Beater Width: 1720 mm (Special) & 2300 mm (Normal)
Production Kg/h: 1000 Kg/h & 1500 Kg/h
Basic Pile Weight: 6000 Kg & 7500 kg
Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
â??Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time
Calender Roller Dia.�¦130 mm Both Sides; Middle �¦116 mm
Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min
Installed Power: 8.6 Kw & 10.6 Kw
Overall size: 22030*5212*3082 & 22030*6648*3082
Net weight: 6000 Kg & 6500 Kg
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery
Product Description
Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing.
Technical Specifications
Machine Type: TMI 60.5.1.200412a
Production: 800 Kg/h
Width: 1060 mm
Beater type: Hedgehog
Beater diameter mm: 610
Beater rotating speed r/mm: 480
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L WH): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412b
Production: 600 Kg/h
Width: 1060 mm
Beater type: Card wire roller
Beater diameter mm: 600
Beater rotating speed r/mm: 540
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412c
Production: 600 Kg/h
Width: 1060 mm
Beater type: Sawblade
Beater diameter mm: 600
Beater rotating speed r/mm: 600
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L X W X H): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
This innovative 6 Spindle Module Set is designed for high-speed, versatile production of a wide range of fancy yarns. Ideal for both experienced and novice operators, this user-friendly system offers exceptional flexibility and efficiency.
6 Independent Spindles: Allows simultaneous processing of multiple yarns with diverse colours, textures, and effects.
High-Speed Operation: Delivers increased output and reduced production time.
Versatile Yarn Creation: Can produce many fancy yarns, including slub, boucle, chenille, and more.
Easy Setup and Operation: Intuitive controls and a user-friendly interface minimize training time and maximize productivity.
Robust Construction: Built with durable components for long-lasting performance and minimal maintenance.
Compact Design: Efficiently utilizes space while maintaining optimal production capacity.
