Find Verified Textile Machinery Equipments Suppliers, Manufacturers and Wholesalers

Model : merce-03
Origen : made in china, brand is japan
Main specifications
Type merce-03
Spindles 72 spindle（double side）
Spindle width: 288 mm
Wind type: cone
Cone size: 3 ° 30 ′ (paper cone tube)
Drum material: aluminum
Speed: 200-750 m/min



Wooden package

Hank spray dyeing machine for yarn.

Naked

Capacity: 120-150kg/hour
Power: 4.75kw
Dimensions: 2200*880*820mm
Net weight:550kg

Wooden case

Nanosox is made of permanent fire resistant fabric from nanotechnology which does not degrade after repeated laundering to stay in premium fire safety performance.

We are professional engaged in the acquisition,sales of second-hand (Tajima) (Barudan) (SWF) and other imported embroidery machine.We have a group of high-quality embroider machine praclitiones who are famillar with embroidery macine manufacture,repaie,maintenance of each process

We bought back 80% new embroidery machine from factory closures.After the repair and mantenance of professional. These embroidery machine can function and new machine match. But the price is cheaper than the new embroidery machine.


40ft container

The machine recycled kinds of textile waste (knitting hosiery fabric rags , hard waste thread , polyester , cloth waste leftover of garment ) re-get the fiber from these waste enable to use for open end spinning and any other textile purpose , make good use of waste material will save cost , the fiber will be instead of raw cotton .



2*40'gp container to load

The machine recycled kinds of textile waste (knitting hosiery fabric rags , hard waste thread , polyester , cloth waste leftover of garment ) re-get the fiber from these waste enable to use for open end spinning and any other textile purpose , make good use of waste material will save cost , the fiber will be instead of raw cotton .


Need4*40'container to load the machine

Recycling machine

Aa. Cleaning machine
Main technical parameter
01. Nos. Of roller / chamber four cylinders /chambers
02. Nos of roll dia 400mm
03. Front roll dia 400mm
04. Back roll dia 400mm
05. Dust basket dia 530mm
06. Taker in wire

1) first cylinder 4.5 /tpi

2) second cylinder 6 /tpi

3) third cylinder 7/tpi

4) forth 7.5tpi


07. Outside dimension : 7200*1720*1160 mm (l*w*h)
08. Nos. Of motor & capacity

Motor: first 11kw one set others 7.5kw three sets

Capicaty 150-200kgs /hour

09. Distance of roll and feed plate 300mm
10. Distance of feed roll and feed plate 50mm



Bb. Opening machine mqk-1060 opening machine
01. Output 150-200kgs /hour
02. Roll diameter 600mm steel cylinder
03. Rotation speed 1350rpm
04. Dust basket 630mm
06. Fan machine 1.5kw one set
07. Chain four pieces
08. Power 18.5kw
09. Taker in wire 3.5-4.5tpi
10. Dimension 2600*1450*1550 mm about

Cc. Cutting machine qd-350 cutting machine
Technical parameter
01. Out put 1000-1500kgs/hour
02. The blade roller dia 320mm
03. Speed of the roller 230rpm
04. Nos. Of motor blade roller y132s-8, 5.5kw 1 set

Feeding and discharging y 90l-4, 1.5kw 1set
05. Chief bearing 6216e 4 (blade roller)
06. Conveyor belt



Nude or wooden package

-- Delivery number: 2 holes
-- Actual output speed: 300m/min-450m/min
-- Drafting style: 5 over 4 with pressure bar drafting
-- Feed sliver number: 6-8 pieces
-- Suitable fiber length: 15-76mm
-- Input can dimension: 400/500/600/800/900/1000X1100mm
-- Output sliver can dimension: 350/400/500 X1100mm
-- Machine size: 2120 x 950 x 1645mm
-- Machine weight: 2200 kgs
-- Main motor power: 4.0 kw
-- Inverter: VFD055M43A (Delta, Taiwan)
-- PLC: DVP-24ES (Delta, Taiwan)
-- Touch screen control: TP04G-AS2 (Delta, Taiwan)
-- With automatic can exchange device.




Lot size: 2120 x 950 x 1645mm
Weight:2200kgs
All of the machines and equipments will be packing in wooden case or crates with pallets and stuffed into suitable containers for transportation by sea,according to the international export packing standard for seaworthy transportation.

-- with 2 sets autoleveler(made by uster)
-- with fp sensor(made by uster)
-- delivery number: 2 holes
-- actual output speed: 300m/min-450m/min
-- drafting style: 5 over 4 with pressure bar drafting
-- feed style: energetic style longitudinal feed
-- feed sliver number: 6-8 pieces
-- suitable fiber length: 20-76mm
-- input can dimension: 400/500/600/800/900/1000x1100
vice.







Lot size: 2490 x 1000 x 2110mm
Weight: 2500kg
All the machines and equipments will be packed in wooden case or crates with pallets and stuffed into containers for transportation, according to international export packing standard for seaworthy transportation.

Testing equipments, testing equipments manufacturers, testing equipments suppliers in saudi arabia

Eps pre-expander specifications:
ItemUnit\model Psf140ii(first, second foaming)Psf140 i
(first, second foaming)Psf120
(first foaming)
Barrel diameterMm 140014001200
VolumeM3 2.83.11.8
Steam pressureMpa 0.4-0.60.6-0.80.6-0.8
Compressed air pressure Mpa 0.6-0.80.6-0.80.6-0.8
Foaming densityKg/m3 4.5-304.5-408-40
Production capacityKg/h 500-600400-80015-450
Installed powerKw 21.920.4517.4
External dimensionsMm 3450*2100*45004500*2150*29503000*1260*3650
Installed weightKg 295025001750

Eps block machine specifications:
ItemUnit\modelPsb-q200Psb-q300Psb-q600Psb-q800
Net internal size of mould chamberMm2040x1020x5303060x1250x6306100x1240x6308120x1240x630
Volume of mould chamberM31.102.414.776.34
Product density/specific weightKg/ m34.5-304.5-304.5-304.5-30
Production efficiency( standard condition)Piece/h4-84-94-96-9
Steam pressureMpa0.6-0.80.6-0.80.6-0.80.6-0.8
Compressed air inlet diameterMm65656565
Steam inlet diameterMm1001000150150
Power supplyV380380380380
PowerKw79.51515
Max. External dimensionMm3600x2000x27504500x2150x29507500x2150x29509500x2150x2950
Installed weightKg30004500950010500

Eps cutting machine specification:
ItemUnitPsq300Psq600Psq800Multi-functional cutting machine
Max. Size of productiveMm3000x1250x12506000x1250x12508000x1250x12506000x1250x1250
Transformer capacityKva5.25.25.215
Total power of installed machineKw6.556.556.5517.45
Max. External dimensionsMm5800x1900x24808800x1900x248010800x1900x24808800x1900x2400
Installed weightKg1200180022002800

In wooden case, plastic paper or wrapped with film, etc.

Specification of eps pre-expqanding machine:
Item Unit\model Psf140ii(first, second foaming) Psf140 i
(first, second foaming) Psf120
(first foaming)
Barrel diameter Mm 1400 1400 1200
Volume M3 2.8 3.1 1.8
Steam pressure Mpa 0.4-0.6 0.6-0.8 0.6-0.8
Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8
Foaming density Kg/m3 4.5-30 4.5-40 8-40
Production capacity Kg/h 500-600 400-800 15-450
Installed power Kw 21.9 20.45 17.4
External dimensions Mm 3450*2100*4500 4500*2150*2950 3000*1260*3650
Installed weight Kg 2950 2500 1750

Specification of eps shape molding machine:
Item Unit \ model Psz120 Psz140 Psz175 Psz2000
Mould size Mm 1200x1000 1400x1200 1750x1450 2000x1600
Finished products size Mm 1000x800x330 1200x1000x330 1550x1200x330 1800x1400x330
Mould opening distance Mm 1400 1620 1620 1620
Steam consumption Kg/cycle 7 9 10 11
Steam pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8
Cooling air consumption Kg/cycle 45-138 50-150 60-190 65-200
Compressed air consumption M3/ cycle 1.5 1.8 2 2.2
Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8
Vacuum pump air suction amount M3/h 165 230 280 280
Production cycle Sec 60-150 60-150 60-150 60-150
Installed power Kw 9.1 12.1 14.1 14.1
External dimension Mm 4600x1850x3300 5000x2050x3700 5000x2400x4000 5000x2650x4150
Installed weight Kg 3200 4300 4850 5300

In wooden case, plastic paper or wrapped with film.

1 raw materials and coke are filled automatically to the top of the cupola entrance.
2 these objects melt and flow out from the bottom of the cupola into the vortex spinning machine.
3 together with a small amount of adhesive and oil, the melt subject generates the filamentous fibers in the vortex spinning machine.
4 filamentous fibers were spun into cotton which conveyed through the rollers.
5 after structure and density adjusted, they enter the curing oven.
6 products out from the curing oven are cutted by the sawing machine.
7 packaging or special handling.
Environment friendly:

Waste gas produced by the blast furnaces, spinning machine and curing chamber will pass through the filters to filter.
After burning treatment, it was discharged through the chimney.
The waste during the production process will be recycled.
Products specification:
Products
Density(kg/m3)
Size
Length(mm)
Width(mm)
Thickness(mm)
Panel
40-200
1000(adjustable)
500-2000
30-150
Felt
40-100
1000(adjustable)
1200
30-100

Stitching felt
40-90
1000(adjustable)
1000-1200
40-100



In wooden case, plastic paper or wrapped with film, etc.

As a professional manufacturer of polystyrene machine in China, our company can supply our clients the European Standard machines. Clients' satisfaction is our first priority.
Product introduction:
1 With reasonable structure, the machine is easy to operate with completed functions.
2 The plate is formed through such processes as feeding, profiling , dispensing, heating, trimming, gouging and cutting.
3 The machine adopts precise low-speed metering pump, frequency control (or stepless speed variation) with computer control and dose is accurate.
4 It can produce flat plate and corrugated sheet of many specifications and models, including the sandwich panel with thickness of 40-300mm and width of 950-1200mm, and corrugated high-intensive composite board with thickness of 40-300mm and width of 950-980mm.
5 This machine applies to color steel plate, aluminum plate, stainless steel plate and so on.


Technical parameters:
Item
Specification
Raw material
Normally 0.2-0.6 aluminum or color steel
Speed
3-6m/min (Depend on the working temperature)
Cutting type
Trace flying saw cutting
Drive
Chain drive

Electric control system
PLC frequency conversion control
Core material
EPS board or rock wool
Total power
35kw
Power supply
380V/50HZ Or Customized
Annual Output
600 thousand square meters
Product width
950-1200 mm (Flat Plate)
950-980 mm (Corrugated Composite Board)

Product thickness
40-300mm
Equipment overall dimension (mm)
24000*2100*2600 / 29500*2100*2600

Laser cutting and hole drilling processing ensures the precise standard of the spare parts.
The rough and the further processing guarantee the high quality of the spare parts.
The heating treatment bring the chain plate a high strength, non-deformation and high resistance to the expansive force from high-density products.
Painting makes the machine be waterproof and antioxidation.
All of these ensures a longer term service than ordinary machine.
The sandwich can be EPS or rock wool.
While the plate can be color steel plate, aluminum plate, stainless steel plate and so on.


In wooden case, plastic paper or wrapped with film, etc.

The Production Line Concludes:
Nc Cutting Machine, H Beam Assembly Machine, H Steel Gantry Automatic Welding Machine Or Dual Cantilever Automatic Welding Machine, H Beam Flange Straightening Machine, H Beam Shot Blasting Machine Equipment.
Production For Standalone Operation, The Workpiece Transporter Rely Crane Lifting, The Entire Line Is Relatively Flexible, You Can Add A Different Segment Of The Process Equipment To Improve Production Efficiency.

H Steel Assembling Machine Specifications:
Dimension Of Web PlateHeight200-1200mm
Thickness6-32mm
Length4000-15000mm
Dimension Of Wing PlateWidth200-600mm
Thickness6-40mm
Length4000-15000mm
Assembling Speed500-1200mm
Installed Power7.5kw, Exclusive Of Welding Power Supply
Transmission Speed0.5-6.0 M/min

H Steel Door Type Submerged Arc Welding Specification:
Dimension Of Applied H SteelWidth200~800mm
Height200~1200mm
Length2000~12000mm
Diameter Of Applied Welding Wire3.2~5mm
Positioning Speed3000mm/min
Welding Speed250~750mm/min
Gauge4000mm
H Steel Flange Leveling Machine Specification:
Width Of FlangeThickness Of FlangeMin. Height Of FormerLeveling SpeedPower Supply
200-800mm6-40mm200mm9000mm/minAc380v50hz

In Wooden Case, Plastic Paper Or Wrapped With Film.

Needle pitch: 5g 7g 8g 10g
Size: c: 35 l: 46 l: 52 l: 63
Knitting speed: finger: 200r/m, palm: 180 r/m
Power: single-phase or three-phase: 220v, 250w; frequency: 50/60 hz
Driving system: crank drive
Knitting system: sinkers knitting theory
Abnormity stop: broken yarn, poor dropping, overloading of motor, bump of needles, low battery, wrong direction
Screen display: digital display
External dimension: 1230*650*1750 (l*w*h)
Net weight: 250kg other choice: feather circle glove knitting machine: 7g, l: 53

Main detail:
Single cylinder
Cylinder Diameter: 3.5 inches
Needle: From 84 needle to 200needle
Double picker point and double down picker
Motor : AC servo motor
Computer : Jinheng computer system
Speed : 300-320 RPM
Only used for make plain socks, can¡¡¥t make terry socks

The production for plain socks:
For men's sock : 250-260 pairs/ 24 hours
For women's sock: 300-310 pairs/ 24hours
For children's sock : 330-340 pairs/ 24hours
Features:



packing in the wooden box
Size:1150X1050X1800
Gross weight:350kgs net weight:280kgs

Model: ds-b
Shoumo: 23 payments (46)
Yield: 60 was t / h (12 paid per dozen)
Air consumption: 0.6m3/min
Total installed capacity: 5.4kw power 12.6kw heat
Power source: 380v 50hz 3 phase 4 wire
Net weight: about 930kg
Dimension: 5.7 meters long 1.8 meters wide and 1.2 meters high
Oven temperature range: room temperature -2

Packing in the two wooden boxes,

Quick details
Place of origin: zhe, shaoxing (mainland), china (mainland)
Brand name: zjfj, zhong-zhi-jie
Model number: zjfj-500
Jacquard glove knitting machine: zjfj-500 jacquard glove knitting machine
Product type: gloves
Computerized: yes
Condition: new
Size: 1320*1020*1750
Glove making machinery: yes
Specifications


1.The main products of the plant
2.Full-featured
3.Cost-effective
4.Class service
5.Jacquard glove knitting machine

Zjfj-500 full computerized jacquard glove knitting machine is the present domestic industry the most leading gloves knitting machinery, precision manufacturing process, a new program design, multi-function weave, single jacquard gloves, double-sided jacquard gloves, silver piece gloves, three-dimensional woven gloves, finger jacquard gloves, or so gloves, touch screen gloves and at the same time knitting five toe sox magical gloves and labour protection glove is ideal model.

Packing in the wooden box,
Size:1320*1020*1750mm
Gross weight:450kgs , net weight 420kgs