High manganese steel x120mn12 mn13 1.3401
1.Standard: en, gb, astm, din
Mn13(x120mn12)wroughtsteel plate have wonderful abrasion resistance of high impact abrasion
And big stress abrasion, when using it will not appear crash.It also has the excellence of easy for
Cutting , welding , curving and other mechanical properties for process.The traditional used high
Chrome forging only have the good wear-resistance of moving abrasion.
Mn13(x120mn12 rolled plate is reduced the cost of useing for quick wear part of low equipment
And save the overhaul fee of equipment, so it improves the competition.
1. Standard: gb, astm, jis, din
American standard: us a128
Europe standard: x120mn12
Jis:scmnh11
China standard:mn13
Zgmn13 china cast steel
High manganese steel
2. Brand name: chongqing special steel, tisco or baosteel
3. Specification: tk3-200mm, width: 500-3000mm, length: 1000-12000mm
4. Chemical composition (%)
C
Si
Mn
P
S
Cr
1.1~1.3
0.3~0.5
12.0~13.0
¡¨¹0.100
¡y0.040
(1.50)
5. Mechanical properties
Tensile
Strength
Rm(mqa)
Yield strength
Re(mpa)
Reduction
Of area a(%)
Ballistic work
Akv(j)
880~1130
¡y410
¡y40
Size: 1250x2470mm, 1850x3700, maximum width is 2000mm
Thickness: 3mm, 5mm, 6mm
Material: stainless steel sus304, imported from finland & germany.
Design: we can develop designs as per special request from the customers.
Engraving: one side, double sides.
Application: the press plate is used in laminating hpl, flooring and mdf board or chipboard, and it also can be used for elevator decoration.
Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the spherical tank, the oil gas storage holder.
Rolling specifications range:thickness within 6-300mm, width within 1500-4000mm, length within 4500-14000mm.
Additional technical terms: heat treatment such as normalized, nace included hic and sscc test, ut according to a435/a435m, a577/a577m, a588/a588m and so on.
Contact us freely if you need the following steel items:
Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the spherical tank, the oil gas storage holder.
Rolling specifications range:thickness within 6-300mm, width within 1500-4000mm, length within 4500-14000mm.
Additional technical terms: heat treatment such as normalized, nace included hic and sscc test, ut according to a435/a435m, a577/a577m, a588/a588m and so on.
Contact us freely if you need the following steel items:
Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the spherical tank, the oil gas storage holder.
Rolling specifications range:Thickness within 6-300mm,Width within 1500-4000mm,Length within 4500-14000mm.
Additional technical terms: Heat treatment such as Normalized,NACE included HIC and SSCC test,UT according to A435/A435M,A577/A577M,A588/A588M and so on.
Contact us freely if you need the following steel items:
Pressure vessel plate also named as boiler steel plate.These steel plates mainly used for building boilers and pressure vessels such as petroleum, chemical industry, power plant, boiler, uses in manufacturing the reactor, the heat interchanger, the separator, the spherical tank, the oil gas storage holder.
Rolling specifications range:Thickness within 6-300mm,Width within 1500-4000mm,Length within 4500-14000mm.
Additional technical terms: Heat treatment such as Normalized,NACE included HIC and SSCC test,UT according to A435/A435M,A577/A577M,A588/A588M and so on.
Contact us freely if you need the following steel items:
Size: 1240X2460mm, 1460X2660mm, etc,maximum width is 2000mm
Thickness: 1----6mm
Material:SUS304
Design: We can develop designs as per special request of clients
In actual fact, the relevant product standard 304 has very clear requirements and standards for different shapes of these products have some differences of stainless steel. Here are some common product standards and testing.
304 stainless steel determined
To identify a material is 304 stainless steel, must meet product standards requirements of each element, as long as there is a non-compliance, we can not call 304 stainless steel.
304 is the most important element of ni, cr, but it is not limited to these two elements. Specific requirements provided by the product standards. Common situation in the industry to determine that as long as ni content is more than 8%, cr content is more than 18% to 304 stainless steel can be considered. This is why the industry would call this type of stainless steel 18 / 8 stainless steel reasons.
Grade 2b 316 stainless steel sheet with favourable price
Steel sheet 316 stainless steel sheet is low carbon austenitic stainless steel 316 sheet is added more mo in 304, the additional mo makes stainless steel sheet 316 is good at resistance to chloride at sea, stainless steel 316 is widely used near sea contructions.
2b surface finish: colded rolled, annealed and pickled, achieve approciate roughness level using flat.
Product details:
Grade: 316, 316l
Stander: aisi, , astm, bs, din, en, jis, nf
Width: 1000mm, 1219mm, 1500mm, 2000mm
Length: 2000mm, 2438mm, 6000mm, as customers'requirement
Wall thickness: 0.2~6mm
Surface treatment: 2b, ba, hl, 2d, 6k, 8k
Application: potable water pipe, equipment for manufacturing chemical, paper, dye, acetic and fertilizer, structures in the coastal area
Main steel grades: st52-3, st50-2, s355jr, s355j2, s355nl, a572 grade 50/60/65, a633 grade a, q345b, sm490a
Steel standard:din 17100, din 17102, en 10025, astm, asme, gb/t1501, jis g3106
Main application::low alloy steel plates are used to manufacture the plants of factory , the common constructure and construction machinery and equipment
Rolling range: thickness*width*length 6-700mm*1500-4200mm*5000-18000mm
Surface treatment: hot rolled and coated
Supply ability: 10000 tons per month
Additional service:shot blasting and painting, cutting and welding as per user's request.
Original mill test certificates would be issued under en10204 3.1 format when delivery in english version.
If the end users need the third party inspection the mtcs shall also be issued under en10204 3.2 format.
Xinsteel'ssteel products are used in bird nest, three gorges dam and many other national key projects, approved by
Tuv, abs, dnv, lr, iso9001:2000 and other international honors.
Xinsteel industrial co., limited
Contact person:ms ann
Email: ann(at)xsteelplate(dot)com
Volume
7.2m3-1855m3
8.4m3-701m3
39m3-13873m3
Capacity
5.4t-1428t
5.8t-755t
30t-10682t
Diameter
1.8m-11m
1.8m-7.334m
3.6m-20.1m
Accessory equipment
- bucket elevator with capacity from 1 tone/hour to 400 tone/hour
- chain conveyor with capacity from 1 tone/hour to 400 tone/hour
- screw conveyor with capacity from 1 tone/hour to 200 tone/hour
- elevator towers
- electrical and manuel controlled slide gates
- distrubutors with 1 in 2/3/4/5/6 out
- catwalks
- spout pipes
Machines :
- drying machines ( tower type and horizontal type ) with capacity from 5 tone/hour to 50 tone/hour
- mill machines with capacity from 5 tone/hour to 50 tone/hour
- pellet machines with capacity from 5 tone/hour to 50 tone/hour
--level sensors, aeration system with centrifugal fan, temperature control system and sweep auger , dedusting system as an option.
Chemical composition (%) National brands China 50 # U.S. C50 Germany CF53 Japan S50C Sweden 1647
Chemical composition C Mn SI P S
S50C 0.47-0.50 0.65-0.80 0.18-0.31 ¡Ü 0.030 ¡Ü 0.030
Delivery status Hot rolling, forging, annealing, normalizing, hardness HB180-220
