ASTM A106 Carbon Steel Pipe For High Temperature
ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particulary suited whenever the trasported fluid has either high temperature or high pressure (or both combined).
ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24') or double random lenght (36 -44').
In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table:
Chemical composition:
Chemical composition, %
Element C Mn P S Si Cr Cu Mo Ni V
max max max min max max max max max
A106 Grade A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08
A106 Grade B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08
A106 Grade C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08
Machanical Property:
ASTM A106 pipe Grade A Grade B Grade C
Tensile Strength, min., psi 48,000 60,000 70,000
Yield Strength, min., psi 30,000 35,000 40,000
Hdrostatic Test of A106 pipes:
The hydrotest shall apply a pressure equal to 60% of the minimum yield strenght for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed, the pipe shall bear an "S" mark on each lenght or pipe bundle.
Pipe marking:Each lenght of pipe (or bundle for smaller diameters) shall have the following markings applied:
Manufacturer name
Material grade(ASTM A106 A / B / C )
Diameter and ANSI schedule (from 10 to 160 and XXS)
Pipe lenght
Heat number
Hydrostatic test pressure or NDE
Weight / foot
Ms Steel ERW carbon ASTM A53 black iron pipe welded sch40 steel pipe for building material
Quick Details
Place of Origin:
China
Application:
Structure Pipe
Alloy Or Not:
Non-Alloy
Section Shape:
round,square,retangular,oval
Special Pipe:
Thick Wall Pipe
Thickness:
0.5 - 12 mm
Standard:
ASTM, bs, GB, JIS, ASTM A53-2007, ASTM A671-2006, ASTM A53M-2007, ASTM A513-2007, BS EN10219, GB 18248-2000, GB/T 3094-2000, JIS G3452-2004, JIS G3456-2004, JIS G3466
Technique:
ERW
Grade:
10#, 20#, 45#, 16mn, Q235, Q195, Q215, ST37, ST52, St37-2, ST35, 10#-45#, 16mn, Q195-Q345, ST35-ST52
Surface Treatment:
Oiled/Black painting/Galvanized
Tolerance:
+/-5%
Processing Service:
Bending, Welding, Cutting, Painting
Type:
Welded Steel Pipe
Product name:
Prices Iron Pipe 6 Meter Welded Steel Pipe Erw Black Square Steel Pipe
Out diameter:
10X10~400X400mm
Length:
1-12m
End protector:
Plastic Pipe Cap, Threads, Coupling
Pipe ends:
Plain end
Sample:
Free
MOQ:
5 Tons
Payment:
L/C, T/T, D/A, D/P, O/A
Packing:
Steel belt, Plastic Bag+Bundles or others
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipment including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.As a factory,which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin. So far, the facility occupies more than 228,000 square feet under roof and includes two working mills and quality assurance chemical- and strength-testing laboratories on site and located on a 2,000-acre site with more than 60 acres under roof, is home to one of the world's largest cupolas; and the Contiarc, the first-of-its-kind continuous arc furnace.Our company has imported the advanced productive equipment and the inspection equipment, we will do the UT testing, RT testing on line, and the Hydrostatic testing during the production.
1.Payment terms:20%+80% TT,100% LC after sight 30-180 days,O/A (Open terms),D/P etc.
2.Quality assurance :We have agents, distributors and authorized partners in more than 80 countries and 140 cities around the world. Any problems about quality, logistics,
after-sales within two years, we will help customers deal with and negotiate 24 hours unconditionally and be responsible for all after-sales problems.
3. Certificate of origin:Either from our Singapore base or China to avoid your anti dumping ,if any
4. Other Certificates:API,ISO,CE,EN10204 3.1/EN 10204 3.2,LOADING REPORT/INSPECTION for Free.
5.Biggest advantages:We have invested independent raw material mill
Square tube carbon steel pipe black hollow section carbon steel Q235 square metal tube
Grade:
A53/ A106/ ASTM252/ ST37
Product Name
Carbon Steel Pipe
Material
A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70
Standard
API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN
EN10217
Certificates
API 5L,ISO9001,SGS,BV,CCIC
Outer Diameter
15mm-1200mm
Wall Thickness
SCH10,SCH20,SCH30,STD,SCH40,SCH60,SCH80,SCH100,SCH120,SCH160,XS,XXS
Length
1m,4m,6m,8m,12m according to buyer's request
Surface Treatment
black paint,varnish,oil,galvanized,anti-corrosion coated
Marking
Standard marking,or according to your request.Marking Method:Spray white paint
End Treatment
Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps
Technique
Hot Rolled or Cold Rolled ERW
Application
Liquid delivery,structure pipe,construction,petroleum cracking,oil pipe,gas pipe
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipment including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.As a factory,which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin. So far, the facility occupies more than 228,000 square feet under roof and includes two working mills and quality assurance chemical- and strength-testing laboratories on site and located on a 2,000-acre site with more than 60 acres under roof, is home to one of the world's largest cupolas; and the Contiarc, the first-of-its-kind continuous arc furnace.Our company has imported the advanced productive equipment and the inspection equipment, we will do the UT testing, RT testing on line, and the Hydrostatic testing during the production.
1.Payment terms:20%+80% TT,100% LC after sight 30-180 days,O/A (Open terms),D/P etc.
2.Quality assurance :We have agents, distributors and authorized partners in more than 80 countries and 140 cities around the world. Any problems about quality, logistics,
after-sales within two years, we will help customers deal with and negotiate 24 hours unconditionally and be responsible for all after-sales problems.
3. Certificate of origin:Either from our Singapore base or China to avoid your anti dumping ,if any
4. Other Certificates:API,ISO,CE,EN10204 3.1/EN 10204 3.2,LOADING REPORT/INSPECTION for Free.
5.Biggest advantages:We have invested independent raw material mill
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.
The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions.
Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.
10386 Steel Pipes Suppliers
Short on time? Let Steel Pipes sellers contact you.
1. China supplier hot dip galvanized steel seamless pipe and tube
Description of API 5L Grade B Carbon Steel tube supplier
7.Related products
8.Our some project
9.Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel tube, stainless steel tube, hollow section, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.
The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions.
Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.
Model: GJZ (y) 50 (120m)
Main Technical Performance of Production Line
1.Overview: the production line is to produce diameter 19 50mm, wall thickness 0.7-2.0mm, special equipment for high-frequency Longitudinal Welded Pipe and corresponding square pipe and special-shaped pipe. The equipment composition is from feeding to cutting and blanking, and the pipe making speed is adjusted accordingly with the change of pipe making specification.
2.Raw Materials: the applicable strip steel materials are hot-rolled or cold-rolled, pre galvanized strip steel coils such as ordinary carbon steel Q195 and Q235 (in accordance with GB700-88 or gb1591-88)
3.Production Capacity: Pipe Making Range
NO. Project Numerical Value Remarks
1 OD of round pipe19mm 50mm
2 Wall thickness of round pipe 0.7mm 2.0mm
3 Size of square pipe 15 1 40 40mm Â
4 Thickness of square pipe 0.7mm 2.0mm Â
5 Size of square pipe 10 30 30 50mm Â
6 Thickness of square pipe 0.7mm 2.0mm Â
7 Speed of pipe making 30M/min 120M/min
8 Length of pipe making 4M 8M
4.Strip Steel Specification (raw material): the applicable strip steel materials are hot-rolled or cold-rolled strip coils of ordinary carbon steel Q195 and Q235, pre galvanized strip steel, etc.
No. Projects Numerical Value Remarks
1 Thickness of steel strip 0.7 2.0mm
2 Width of steel strip 60 160mm
3 OD of steel coil 800mm 1500mm
4 ID of steel coil 450mm 550mm
5 Maximum coil weight 2000kgs
5.Square Pipe Production Mode: round to square, angle out
6.Unit Production Mode: continuous
7.Unit Operation Direction: left or right (determined by the process layout of the user's workshop)
8.Bottom Line of Pipe Making: + 760mm (can also be customized according to customer requirements)
9.Welding Mode: high frequency induction welding, 200KW.
10.Speed of Pipe Making: 30-120m / min
11.Total Power of Production Line: 430KW
China manufacturer of ASTM A106 Grade B10"xSCH40 Seamless Carbon Steel Pipe
Standard: ASTM A106
Steel Grades: Grade B
Size Range: OD:1/2 TO 24. WT: 3mm To 45mm
Manufacturing Process : Hot Rolled / Hot Expansion/ Cold Drawn
Application:These pipes are used in the construction of boilers, piping systems and heating systems in chemical projects. A53 Pipes are intended for mechanical and pressure applications, as well as ordinary uses in steam,water, gas and airlines.
Packing: External Black Painting ,Both Side With End Caps, In Bundles by Steel Strips,Covered by Waterproof.
Spiral welded pipe(SSAW pipe, also called HSAW pipe). The pipe is formed by spiral submerged arc welding technology. Spiral welded pipes are formed using narrower plates or hot rolled coils, which lowers their production costs significantly. The welding line shape like a helix. The spiral welding process permits the production of large-diameter pipes suitable for transporting large volumes of oil and gas. Some SSAW pipes were historically limited to low-pressure applications.
Rolls are an important tool for the production of welded pipes and cold-formed steel. Our company adopts German COPRA software design, which combines the design advantages of the United States, Japan and other countries, combines the characteristics of the forming unit, and carries out the 5-step and 4-level design of the roll. The round pipe design uses the internationally advanced "W" hole type", "F-F" combination hole, which can be directly square or rounded.
Including round pipe (water and gas pipe, API oil casing), oval pipe, transformer pipe, P-shaped pipe various square rectangular pipe and various closed profile rolls (round pipe diameter 8-630mm, square rectangular type Roller 10 10-600 600mm ;)
including round pipe (water and gas pipe, API oil casing), oval pipe, transformer pipe, P-shaped pipe various square rectangular pipe and various closed profile rolls (round pipe diameter 8-630mm, square rectangular type Roller 10 10-600 600mm ;)
Standard: GB3091-2015, GB28897-2012
Grade: Q195 Q235B,Q355B, SS400
Thickness : 2.0mm-5.0mm
Section Shape: Circular
Place of Origin : Hebei Province
Outer Diameter: 21.3mm-219mm
Technique: ERW
Certification : ISO
Application: Drinking water transfer fire-fighting water transfer
Surface Treatment: hot dipped galvanized
Packaging&Deliver
Packaging Details: Bulk Bundle
Delivery Detail: bulk or container.
Standard API-5L, SY/T5037-2012
Grade Q235B,Q345B,SS400, S235JR, X70
Thickness 6mm-18mm
Place of Origin Handan Hebei , China
Outer Diameter 219-2020
Technique ERW
Certification ISO , API 5L
Application: Structure pipe
Surface Treatment: Gas pipe, Fluid pipe. Oil pipe , water
Packaging&Deliver
Packaging Details : Bundle
Delivery Detail: bulk or container
10386 Steel Pipes Suppliers
Short on time? Let Steel Pipes sellers contact you.
