Description STS2200 insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. STS2200 insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer. Characteristics A.STS2200 belongs to rtv-2. It’s curing speed can be adjustable, and the deep-seated curing speed is fast, and it is suitable to be used in the factory; B. Neutral curing, non-corrosive to metal, coated glass etc. C. High modulus and high strength; D. Release low-molecular-weight alcohol and no unpleasant odor during cure; E. Excellent resistance to weather, uv, ozone, water; F. Remains flexible over a temperature range of-58°f(-50°c) to302°f(150° c) G. Good compatibility with other neutral silicone sealants. Applications As a secondary edge adhesive sealant in insulating glass units.
Specification : 1.100% food grade silicone material, nontoxic to humans body, with environmental protection 2. Temperature range:-40~260 centigrade 3. Unbreakable, pliable, and not fragile 4. Non-stick finish, durable and easy to clean 5. Suitable for microwave oven and deep-freezer 6. Different style and color available 7. Pattern and logo can be emlbossed, debossed and silk printed on bowl 8. Any color and size available 9. Oem orders are welcomed 10. It is good and necessary part of the household and kitchen
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
SiC Sintered silicon carbide seal ring ( rotary face and stationary ring ) Huihan supplies ceramic seal rings with great mechanical properties which is widely used in pumps, valves, automotive engineering, and medical analysis equipment or even in the fully automatic coffee machines used in homes every day. Material: Pressureless sintered silicon carbide, reaction bonded silicon carbide, tungsten carbide Character: Exceptional resistance to corrosive and abrasive environments High temperature resistance
Specification BrandCodeMg (%)Re (%)Si (%)Ca (%)Al (%)Ti (%)Fe (%) Fesimg5re25-24.0-6.01.0-3.038-442.0-3.0 -
??(specification): Type chemical composition(%) Ca si c al p s = = Ca31si60 31 55-651.0 2.4 0.04 0.05 Ca28si60 28 55-651.0 2.4 0.04 0.05 Ca24si60 24 55-651.0 2.5 0.04 0.04 Ca20si50 2050-601.0 2.5 0.04 0.04 Ca16si55 1650-601.0 2.5 0.04 0.04 Ca28si50 2850-551.0 2.5 0.04 0.04 Ca30si50 3050-551.0 2.5 0.04 0.04 Ca10si40 1040-450.5 2.0 0.05 0.05 Also can execute the production according to customer's special requirement Size: 1-3mm, 10-30mm, or as per customer detail required Packing : 1mt bag, 25kg one bag in 1mt big bag Payment terms: t/t or irrevocable letter of credit at sight. -
My company product silicon metal,The grade include 441.421.551.553. The packing is 1000kg plastic woven bags. PORT:QingDao port Delivery date:shipped in 25days after payment. Payment:Fob or TT. Supplier place:AnYang city China.
Wacker 623 similar pad printing silicone is excellent applied for printing pads making of perfect irregular patterns On plastics toys, on plastics toys, electronic toys, trademarks, keyboards, electroplating products Etc. Lectronic toys, trademarks, keyboards, electroplating products etc. Part a : 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in white color Part b: 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in sky blue color
Shinetsu Silicon Made in Korea Japanese brand, and made in South Korea
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made of coke, steel chips, quartz (or silica) as raw materials and smelted from an electric furnace. Ferrosilicon is often used as a deoxidizer in steelmaking, and it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in alloy production and chemical industry, commonly used as a reducing agent
SPK Customized MoSi2 heating element MoSi2 resistive heating element is a high temperature resistant and anti-oxidation resistance heating element based on molybdenum disilicide. When used in high-temperature oxidizing atmosphere, a layer of bright and dense quartz (SiO2) glass film is formed on the surface, which can protect the inner layer of the silicon molybdenum rod from oxidation, so the silicon molybdenum rod element has unique high-temperature oxidation resistance. Under oxidation atmosphere and the maximum service temperature is 1800 �¢??, the resistance of the silicon molybdenum rod electric heating element increases rapidly with the increase of temperature, and the resistance value is stable when the temperature is constant. Under normal conditions, the element resistance does not change with the length of service time, so the new and old silicon molybdenum rod heating elements can be mixed.
As the new alloy for converter, Silicon Carbon Alloy can replace Ferro Silicon to be used as deoxidizer. Â lower steelmaking cost, increase economic benefit, improve product quality and stable performance.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Silicon briquette is a good substitute for FeSi in steel making, which has advantage in lowing the costs of production and reusing resources. This product is the new product we developed and mainly repressed by silicon metal slag. Now, there are far and wide market in domestic and South Korea.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Our factory have silicon metal powder grinding workshop and R&D centers with annul processing capacity of 50,000 tons. The main grades include 2202,3303,441,421'411,553etc Grinding sizes:can be processed according to customers' specification.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Silicon Metal, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-ferrous alloys. It is a product made by smelting quartz and coke in an electric furnace. The main element silicon content is about 98%, and the remaining impurities are iron and aluminum, Calcium, etc.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Place of Origin: Guangdong, China Brand Name: CMAI Model Number: CM195 Processing Service: Moulding, Cutting Colors: Custom color LOGO: Custom sample Type: Value OEM/ODM: welcome size: Custom size Feature: Sustainable
Brief description YJS-525 is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation recation. It is widely used for resin, gypsum, concrete/cement and artificial stone molding. Features -Easy to demould -Good resistance to tearing -Good elastic -Good tear&tensile strength -Dimensional stability in time ( deformation - shrinking only up to 0.3 % ) -Remarkable resistance to high temperatures (up to 200 - 220â?? ) -Final curing at room temperature Specification Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-525 Hardness Shore A 25�±2 Mix Ratio A:B 100:2 Color / White Pot life 25 �°C (77F) 30-40mins Curing time 25 �°C (77F) 3-4 hours Mixed viscosity mPa.s 15000�±1000 Tear-strength kg/cm â?¥25 Tensile-strength M.pa â?¥4.2 Elongation % â?¥480 Shrinkage % â?¤0.3% Package * Small size:1kg/jar A +20gram/jar B, 12 jars in one carton. MAX 336KGS in one pallet 5kg/jar A + 100gram/jar B, 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg/jar A+ 100gram/jar B, 4 jars in one carton. MAX 480KGS in one pallet(plastic drum) * General size: 20kg/pail A +400gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 25kg/pail A + 500gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 200kg/pail A + 4kg/pail B, 2 pails or 4 pails in one pallet 1kg package 12 jars in one carton. MAX 336KGS in one pallet 5kg metal drum 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg plastic drum 4 jars in one carton. MAX 480KGS in one pallet 20kg or 25kg plastic drum 18 pails or 24 pails or 27 pails in one pallet 20kg or 25kg metal drums 18 pails or 24 pails or 27 pails in one pallet 200kg metal drum 2 drums or 4 drums in one pallet Storage YJS-525 has a shelf life of at least 12 months in the sealed container between 5 C and 30 C. If the material is kept beyond 12 months it is not necessarily unusable, but a test should be performed on the product to check suitability to the application
Essential details Place of Origin: Guangdong, China Brand Name: Cmai Type: Insulation Sheet, Insulation Sheet Material: Silicone, 100% silicone Application: High Voltage Rated Voltage: 220V thickness: customizable Hardness: customizable Certificate: ROHS Product name: thermal conductive pad Color: customizable Size: customizable Sample:Avaliable Usage: Insulation Protection Supply Ability: 100000 Piece/Pieces per Day
Metallic silicon, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-ferrous alloys. Metallic silicon is a product made of quartz and coke smelted in an electric furnace. The content of the main component silicon is about 98%, and the other impurities are iron, aluminum, calcium, etc. In industry, silicon metal is usually produced by reducing silicon dioxide by carbon in an electric furnace. Chemical reaction equation: the purity of silicon prepared by SiO2+2C Si+2CO is 97 98%, which is called metallic silicon. Then it is melted and recrystallized, and impurities are removed with acid to obtain metallic silicon with purity of 99.7~99.8%. Metal silicon particles: 1-200mm silicon metal should be used to produce organic silicon, produce high-purity semiconductor materials and prepare alloys with special purposes. (1) Production of silicone rubber, silicone resin, silicone oil and other silicone. (2) Manufacture high-purity semiconductors. (3) Prepare alloy. (4) It is an excellent antioxidant in refractory and powder metallurgy industries. Our company can provide various specifications and models of metal silicon blocks, particles and powders according to customer requirements.
