YJS-620 is a two-component 1:1 Mix addition (platinum)cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour.
Product index: XJ-201T XJ-201Q Viscosity cst:700000-800000 1000000-1200000 Appearance: Microtransparent milky paste Microtransparent milky paste Specific gravity:1.03-1.05 1.03-1.05 Product features: XJ201T,XJ201Q silicone paste are a paste mixture prepared by thermal condensation of silicone oil with different viscosity (350CST, 1000CST, 60000-10000CST) in different proportions, supplemented by gas phase silica, T functional group, Q functional group silicone and special diffuser at high temperature. When used, it is supplemented by certain thickening agent. Emulsifier, etc., can be made into different uses of defoaming agent. Widely used in printing and dyeing, paper making, ore flotation, paint and so on, featuring fast defoaming speed, good dispersive performance and long foam suppression time.
Deoxidizer: Ferro silicon is used in the steelmaking industry as a precipitation deoxidizer and diffusion deoxidizer. Reducing agent: high-silicon ferro silicon or siliceous alloys can be used as reducing agents for the production of low-carbon iron alloys in the ferroalloy industry. Alloying agent: Ferro silicon can be used as alloying agent for low-alloy structural steel, composite steel, spring steel, bearing steel, heat-resistant steel and electric silicon steel smelting, to produce single crystal silicon or to prepare non-ferrous metal alloys. Inoculant: adding ferro silicon to cast iron can be used as an inoculant for nodular cast iron to prevent the formation of carbides, promote precipitation and spheroidization of graphite, thereby improving the properties of cast iron. Coating: Ferro silicon powder can be used as a suspension phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
CAS No.:61827-42-7 MF:RO.(C2H4O)n Purity:99.5% Type:Absorbent Absorbent Variety: Activated Carbon Usage: Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals Water content (%):â?¤1.0 Characteristic and Applications: 1. Easily dissolved in water, excellent property of emulsification, penetrability and humectation. 2. Used as abstergent, degreasing agent, refining agent, emulgator in textile industry and leather processing industry. 3. Have special emulsify effect to amido silicone oil and dimethyl silicone oil, improve efficacy after use. 4. Used as metal processing additive, multifunctional cleaning agent, decontaminate synergist, household cleaning agent and leaning agent for vehicle, public facility.
CAS No.:63148-62-9 Other Names:pdms MF:(CH3)3SiO[(CH3)2SiO]nSi(CH3)3 EINECS No.:63148-62-9 Purity:99.9% Place of Origin:Anhui, China Type:silicone oil, Chemical polymer Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Petroleum Additives, Surfactants, Water Treatment Chemicals Brand Name:ZINCA Model Number:ZINCA-z201 Product name:Polydimethylsiloxane Viscosity:50 100 350 1000 cst Apperance:Clear colorless liquid Keywords:Dimethicone Application:Cosmetics,hair, polish,lubricant, molding release etc. Sample:Availabe Storage:Cool and dry place
Silicon metal 521/421/3301, etc.
Descriptions: Silicon metal is also called industrail silicon or crystalline silicon. It is siliver gray with metallic luster,when be processed into powder the coloure si dark grey. It has high melting point,good heat resistance and high resistivity.It is usually used in electro, metallurgy and chemical industry.It is the dispensable essential raw material in the hi-tech industry. Features: 1.silicon is widely used in smelting alloy elements, as a reducing agent in many kinds of metal smelting. 2.silicon metal widely applied to refractory material and powder metallurgy industry to improve the heat resistance and oxidation resistance. 3.Inddustrial siliocn powder is regarded as alloy additive, impove the steel hrdenability in metallurgy and foundru industry. 4.It is mailnly used in production of alloys, polycrystalline silicon, organic silicon materials and high-grade refractor.
Silicone rubber ZY-860 suitable for the production of ordinary silicone products, such as silicone rubber buttons, sealing rings, etc. Appearance translucent solid, density 1.16±0.03, hardness 60±3, tensile strength 7.0, elongation 260, tear strength 10.5, shrinkage 3.1~3.5, rebound elasticty 52, plasticity 230±25, vulcanizing agent double 2.5 .
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
(1) Ferrosilicon is an indispensable deoxidizer in the steelmaking industry. In steelmaking, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. (2) Used as an inoculant and spheroidizing agent in the cast iron industry. In the production of nodular cast iron, 75 ferrosilicon is an important inoculant (helping to precipitate graphite) and nodulizer. (3) Used as a reducing agent in the production of ferroalloys. Not only the chemical affinity between silicon and oxygen is great, but the carbon content of high-silicon ferrosilicon is very low. Therefore, high-silicon ferrosilicon (or silicon alloy) is a commonly used reducing agent in the production of low-carbon iron alloys in the ferroalloy industry. Ferrosilicon particle size: 0-1mm, 1-3mm, 3-10mm, 10-50mm, 50-100mm or customized. Packing: Packed in ton bag, 1000kg/bag
High carbon silicon is a new type of alloy used in converters, and can also be called silicon-carbon alloy. It can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes.
Silicon metal 441 Si:98.7%min. Fe:0.5%max. Al:0.5%max. Ca:0.3%max. Size:10-100mm,or customize In plastic woven bags of 1 mt each.
Silicon metal 441 Si:99.0%min. Fe:0.4%max. Al:0.4%max. Ca:0.1%max. Size:10-100mm,90%min or customize In plastic woven bags of 1 mt each.
100:2 two-component liquid silicone rubber belongs to condensation type mold silicone rubber. When part A and B are mixed in 100:2 weight, the crosslinking reaction can occur, and the elastic body with certain hardness is formed after curing. It has many advantages, such as good fluidity, easy to operate with low viscosity. After curing, it has heat resistance, high temperature resistance, corrosion resistance, solvent resistance, high tensile and tear strength, low linear shrinkage, high turning model times. It is a cast of gypsum, cement, POLY-RESIN, PU, AB water, ABS material of the elastic mold material, it is widely used in the production and reproduction of sludge, toys, gifts, reliefs, statues, city sculpture, cement products, hand plate, car model, model of home appliances, mold products such as soap.
Item: OTT-S825 Mixing ratio:100:3 Color: White Hardness: 25;¨¤2 Viscosity (mPa.s):15000;¨¤3000 Working Time (25):20-40mins Curing Time (25):3-5h Tear-Strength (kN/m):;Y25 Tensile- Strength (Mpa):;Y4 Elogation (%):;Y500 Shrinkage(%):;¨¹0.2 1kg/tin 5kg/tin ;20kg/drum; 25kg/drum; ;200kg/drum
