This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller. This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system. Solar heating system 1) once heat-exchange system 2)twice heat-exchange system ( single copper coil ) 3) twice heat-exchange system ( double copper coil ) Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
Evacuated Tube Specification Diameter Length 47 x 1500, 58 x 1800. Vacuum degree Pa 5 x 10 -3 . Absorptivity >0.93. Emissivity
Volume: 105~135L; 135~300L. Vacuum tube: 47*1500mm; 58*1800mm. Skin material: Fluorocarbon board with high quality. Inner tank material: Imported SUS304-2B food grade stainless steel. Insulating layer: polyurethane's cellular(thinkness:60-70mm). stent : Imported stainless circle steel. Specification: 15pipes\16pipes\18pipes\20pipes\24 pipes\30pipes\36pipes.
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 150*50*50cm, 50kg
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of color is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 50kg per piece
Collector:47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or slantly. Carbon size: 180*50*50cm for twenty-tube solar water heater.
Features: 1) Inner tank: stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation :polyurethane 50mm/60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector: aluminum component/stainless steel .
Type: E5-58/1800-16 Outer tank: Al-Zn sheets Inner tank: SUS304-2B stainless steel Insulation: polyurethane, 55mm Absorptive coating: AL-N/AL Vacuum tube: Borosilicate glass,diameter: 58mm, length: 1.8m, 16pcs. Frame: aluminum alloy Absorber area(¬O): 2.0¬O Volume tank(L): 135L. Carton.
Thermo siphon solar collectors provides mains pressure pre-heating via a high efficiency copper coil heat exchanger located within the solar collector tank. The way in which the Mains Pressure solar collector heats water is the same as the Non pressure solar collector. Rather than using the water in the tank directly, as the Non pressure does, the type uses a 45óª60 copper coil heat exchanger inside the tank which provides more than 1.2m2 of heat transfer area. When water flows though the coil it absorbs heat from the water inside the solar collector tank. The solar collector tank is therefore a thermal store. One advantage of this system is that almost no water is introduced into the tank apart from occasional topping up), so corrosion and scale buildup are almost totally eliminated. Tanks are designed for low to medium pressure applications using a gravity feed tank or pressure reduction valve. Direct connection to mains pressure water supply is not permitted. MODEL Lighting (m¬˜) Vacuum Tube Cubage (L) GW (kg) Qty.per20úº/40úº Container diameter Length No. LQ470-1800/58-20 2.99 ¼¦58mm 1800mm 20 165 120 37/74 LQ470-1800/58-30 4.42 ¼¦58mm 1800mm 30 250 160 25/51. MODEL Lighting (m¬˜) Vacuum Tube Cubage (L) GW (kg) Qty.per20úº/40úº Container diameter Length No. LQ470-H1800/58-20 2.99 ¼¦58mm 1800mm 20 165 120 36/73 LQ470-H1800/58-30 4.42 ¼¦58mm 1800mm 30 250 160 24/49.
The heat collectors and the water tanks are connected perfectly, the heat which the panels collected will be stored in the water tank, it guarantees 24 hours per day to provide the hot water, and the system can work even under the -30 degrees. It can supply with a few tons even more water, is an ideal hot water supply system. It is applied to the big hotels, restaurants and other large places. 1: The water tank should be placed higher than the heat collectors, while the models are isolated types and the heat collectors are not pressure-enduring; The water recycled freely by the height difference between the water tank and the heat collectors. 2: The water tank should be placed lower than the heat collectors, while the models are isolated types and the heat collectors are pressure-enduring, the water is recycled by the water pump between the water tank and the heat collectors, the specific pressure-enduring models, please see the information of the pressure-enduring models on the web.
Compact pressurized solar water heater work with heat pipe: 1. The material of inner tank is SUS304 2B (food grade) with 1.2mm thickness. All machine welding. 2. The material of outer tank is SUS304 2B with 0.4mm thickness. 4. The material of stand frame is stainless steel with 1.2mm thickness or Aluminum alloy with 2.0 thickness. 5. The thickness of polyurethane foam is 55-60mm. 6. It uses heat pipe to transfer heat energy, there is no water in the vacuum tubes, and it can be used in all climates. 7. Automatic water supply, could supply water self-acting without any other installation and could able to be pressured.
Solar heater
Feature: Special Anodized aluminum alloy frame to ensure handsome appearance and can accept high pressure without leakage. 50mm fiberglass insulation and EPDM seal strip to assure the solar collector can work under cold temperature. Operation Temperature -33 degree to 120 degree. Patterned temper glass or low iron temper glass (4mm thickness) is not easy broken with very high transmission and low emission Black chrome or Magnetic blue sputtering coating has very higher absorption rate to ensure the high efficiency. Carton 100kg,
1. Uni-directional heat transmission 2. Can start from lower temperature 3. Faster transmission 4. Lower heat capacity 5. Low temperature resistance 6. Freeze-proofing 7. High frequency soldering inner tank 8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system 9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency, 10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes, Export cartons
Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free 5 years quality warranty All install documents are free Export Cartons
1) inner tank:stainless steel sus304-0.5mm 2) vacuum tube:qb-al-n/al-47-1500/58-1800 3) outer tank:stainless steel sus304 4) insulation:polyurethane 50mm/60mm 5) frame:stainless steel bar 1.2mm 6) reflector:stainless steel
1) this type of solar water heater works with high pressure, so do the water it prodeces. 2) it uses the heat pipe to delivery the heat energy, it can works rapidly 3) because of no water in the vacuum tube, so there will not tube breakage in the winter 4) each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage 5) inner tank:macromolecule 6) vacuum tube:al-n/al47-1500/58-1800 7) outer tank:sus304-2b 8) reflector:aluminum component/stainless steel
KES58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L Note: 1. with heater exchanger 12mm,max.pressurized 8bar; 2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole; 3.the air vent hole can connected with central heat supply pipe to heat the tank wate
Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons
Ke58a Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50~60mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l
