Right Angle Prism Right Angle Prism may be used as a 90 degree reflector or 180 degree retroreflector. The prism deflect, deviate and rotate beams of light as well as dispersing their wavelengths. They usually used for beam deviation or as substrates for beam splitters. We also provide other optical prism such as roof prism. Capacity: Material: Optical glass, Fused silica, Sapphire. Dimension: 1-20 mm Dimension Tolerance: +0/-0.1 mm Surface Flatness: /10@632.8 nm Surface Quality: 10- Angular Accuracy: Second Coating: Uncoated, AR, HR, Beamsplitter ect. Specification: Material BK7 grade A optical glass or UV fused silica Dimension Tolerance +0.0, -0.2m m Clear Aperture >80% Surface Quality 60-40 scratch and dig 90 Deviation 3', 1' or 30" Flatness /2 @632.8 nm Protective Bevel 0.2mm x 4 BK7 Right Angle Prism Standard Products: Size (mm) 3 min. deviation 1 min. deviation 30 sec. deviation Part No. Part No. Part No. A=B=C=3.2 TAP101 TAP201 TAP301 A=B=C=4.0 TAP102 TAP202 TAP302 A=B=C=10.0 TAP103 TAP203 TAP303 A=B=C=12.7 TAP104 TAP204 TAP304 Note: Other sizes, material and coatings are available upon request.
Paul prism Paul prism is a type of reflection prism which can be used to alter the orientation of an image. Light enters the large face of the prism, then hits on the roof, by total internal reflection twice from the roof, the beam exits again through the large face. An image traveling through a porro prism is rotated by 180 but not inverted. Capacity: Material: optical glass, fused silica, sapphire. Dimension: 1-250 mm Dimension tolerance: +0/-0.1 mm Surface flatness: /10632.8 nm Surface quality: 10-5� Angular accuracy: 5 second Coating: uncoated, ar, hr, beamsplitter ect.
