We bring to our esteemed clients a range of innovative Sheet, Plates & Coils that have been developed to meet the requirements of the changing trends. These efficient Sheet, Plates & Coils are used in a various mechanical and general engineering industries.
1518 Anodes Of 88 Kg Each With A Total Of 121.5 Tons. Approx. Value Usd917.05 Ex Work Mine. Skills Requirement Anodes: Technical Description: 1. The Surface Of The Anode Plate Is A Lead-based Alloy Rolled Plate, And The Composition Of The Lead Alloy Plate: Sn: 0.8â?¡0.02%, Ca: 0.08-0.1%; 2. Lead Raw Materials Used In Lead Alloys Are Pb 99.99 Lead Ingots Specified In Gb/t 469: The Chemical Composition Of Copper Conductive Beams Is T2 Red Copper Specified In Gb5231; 3. The Quality Of Lead Alloy Plate Refers To Ys/t 498-2006, The Surface Is Smooth, Clean And Flat, No Cracks, Layers And Slag Inclusions Are Allowed; 4. The Thickness Of The Lead-coated Layer Is Uniform And Tightly Bonded With The Copper Rod, The Surface Is Smooth Without Flash, Burr, Pores And Inclusions, And The Surface Has No Deep Scratches; 5. The Welding Seam Is Welded By The Reverse Button Method (the Plate And The Beam Have Dovetail Grooves) To Ensure The Welding Seam Of The Beam And The Plate Is Firm.
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
Unik brand unformed lead plates din type 18 or 19 tubes or bs type 15 tubes suitable for forklift / golf cart etc. (traction & semi traction) batteries. Seaworthy cartons stacked in fumigated wooden pallets
Lead slag produced from rotary furnace lead percentage is 20 to 25%
Lead powder and lead concentrate are different forms of lead that serve various industrial purposes. Here's an overview of each: Lead Powder: Form: Lead powder refers to finely ground particles of lead metal, typically in powder or granular form. Uses: Battery Manufacturing: Lead powder is often used in the production of lead-acid batteries. Radiation Shielding: Lead is known for its ability to absorb and shield against radiation, and lead powder can be used in various applications where radiation protection is required. Ammunition: Lead powder is a component in the production of ammunition and bullets. Metal Coatings: It may be used in the manufacturing of certain types of paints and coatings. Lead Concentrate: Form: Lead concentrate is a raw material derived from the mining and processing of lead ores. It is not a pure form of lead but rather a mixture containing lead and other minerals. Composition: Lead concentrate typically contains lead sulfide (galena) as the primary mineral, along with other sulfide minerals. Processing: The lead concentrate is further processed through smelting to extract pure lead metal. Uses: Lead concentrate is a crucial intermediate product in the production of refined lead. It is an essential raw material for lead smelters, where the lead is separated from impurities and processed into the desired forms. Lead concentrate may also contain valuable by-products such as silver and zinc.
Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality. They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.
Lead Ore
We deals in the following products :- 1) Lead Ingots 2) ZInc Ingots
Nigeria is one of the Africa countries with abundant lead natural resources deposits and minerals. Lead is a metallic element primarily produced from the mineral, galena. Most mineral ore contains lead with only about 3 of these minerals commercially viable, they are galena, cerussite, and anglesite and are mostly found in conjunction with other metals like zinc and silver. We have the capacity to supply more than 1000MT monthly.
Are you in search of a reliable source for high-quality lead? We have the perfect solution for you! We are delighted to offer you top-notch lead (Pb), tailored to your specific requirements. Here are all the details: **Details and Characteristics:** - Product: Lead (Pb) - Shipping Port: To Be Announced (TBA), Peru - Origin: Peru - Dispatch Quantity: 10,000 metric tons per month (120,000 metric tons per year) or even more! - Price: FOB (Free On Board) -17% according to the LME (London Metal Exchange) - Net Price after Commissions: 14% - Seller Side Commission: 1.5% (Closed) - Buyer's Side Commission: 1.5% (Open) - Delivery Time: 45 days from the issuance of the Bank Instrument - Contract Duration: From 1 to 3 years - Payment Terms: 100% FOB upon presenting SGS and sales documents reflecting the mineral's value based on the LME valuation of the day. Payment will be made via bank transfer, along with the issuance of a non-transferable Letter of Credit in "MT 760" (SBLC) format in favor of the Seller. We are committed to providing you with a consistent and reliable supply of lead, and we are ready to tailor our offering to meet your specific needs and preferences. Please do not hesitate to get in touch with us if you have any questions or need additional information! Our dedicated team is here to assist you in every way possible. Thank you for considering our offer. We eagerly await the opportunity to collaborate with you. Your satisfaction is our priority, and we are confident that our product and terms will exceed your expectations.
Can be cater made to suit requirement at Constructions ( Plumbing and Roofing), Foundation ( Shock observer), Copper Recovery Refineries, Ferrous Tank Linings and for Radiation protection ( Hospitals and Nuclear plants)
1980 Cathodes of 42 kg each with a total of 83 tons. Approx. value USD467.17 ex work mine. Skills requirement Cathodes: Technical Description: Board surface: 316L stainless steel, surface finish: 2R (Ra0.30-0.50um), there should be no micro-cracks and no obvious scratches or scratches on the board surface, and no deformation such as unevenness, delamination, etc. is allowed. The flatness of the board surface is less than or equal to $1.5mm, the plumbness of the board surface: the error at the bottom of the board surface is less than or equal to 3mm, and the difference between the diagonal lines is less than or equal to $1.5mm. Conductive rod (steel-copper composite rod): The conductive rod is clad with copper, the copper is T2 electrolytic copper, and the steel is 316L stainless steel. The center line of the conductive rod coincides with the surface of the board, and the perpendicularity (drape) of the board surface and the conductive plane of the conductive end is +3mm; the parallelism of the two conductive planes of the end of the conductive rod is $0.5mm. The bottom milling "V°-shaped groove is opened, and the conductive beam and the stainless steel plate are fully welded by fully automatic laser on both sides.
Industrial Minerals
Commodity 1 provides Lead ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers�¢?? leading lead ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 20 MT/Month 60MT/Month Lead time (days) 30 Days 30 Days CHEMICAL COMPOSITION ANALYSIS Element Chemical Symbol Typical Concentration (% by weight) Lead Pb 60.3 Sulfur S 23.7 Oxygen O 12 Silver Ag 0.2 Zinc Zn 0.1 Copper Cu 0.21 Iron Fe 2 Arsenic As 0.01 Antimony Sb 0.01 Lead ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free but buyers should arrange with a courier service of their choice to pick up a free sample.
We are operate in the supply of Aluminum Ingot, Zinc Ingot, Copper Cathode, Copper Rod, Copper Wire, Aluminum scrap, Zinc Ingot, HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Used Drained Lead Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
Leads Composition structure 1. There must be no molten slag, particulate oxygen, inclusions and external pollution on the surface of lead ingots. 2. Lead ingots must not have cold partitions, and must not have flash burrs larger than 10mm (repairing is allowed). Sign 1. Each lead ingot will be cast or printed with the trademark and batch number. 2. Use paint that is not easy to fall off to mark the brand mark on the lead ingot. The color and position of the mark should meet the requirements. 3. Each bundle of lead ingots should have a striking and difficult to fall off mark, indicating the manufacturer's name, product name, brand number, batch number and net weight. Single weight of small ingot 48kg�±3kg,42kg�±2kg,40kg�±2kg,24kg�±1kg; Single weight of large ingot 950 kg�±50kg,500 kg�±25kg Package The small ingots are bundled and packed with non-corrosive packaging tape. Large ingots are supplied as bare ingots
Remelted Lead Ingots are being produced from Raw Lead / Battery Scraps / Lead Scraps and other scraps of Lead in the specially designed Blast Furnace. The Scrap is obtained and is mixed with other reducing agents in the Furnace.
We are Ummehani Industries Manufacturers, Exporters & Importers of remelted lead ingots. We are buying scrap materials from different sources and processing it securely to mitigate environmental pollution to a greater extent. We have built a well-equipped infrastructure facility. We have divided our infrastructure into different units for the smooth flow of the entire processing operation. Our units are facilitated with contemporary tools and advanced technologies that are essential for presenting immaculate quality cadmium and lead products at a rapid production rate. The head office is located in Moradabad (Uttar Pradesh) INDIA, but our customers can be found worldwide. Our customers are mainly in the metals industries around the world.
We have Mines Source from Laos with total reserve about 2.000.000 MT of Lead Ore. Purify reach to 79% and over. Capacity: 10.000 MT per Month Shipping Terms: Exw or FOB Nghi Son port, Vietnam. Payment: LC at sight or TT against Documents
