1. Loading capacity - 400 kg to 1200 kg gross 2. Heating - electric heater type/ gas type 3. Quenching - oil quenching or molten salt 4. Atmosphere - nitrogen methanol, endo gas As per the equipment
1. Capacity - fromm 100 kg/batch to 2000kg/batch 2. Media - steel shots ( cast or cut wire) 3. Dust collector- standard cloth bag or cassete type 4. M/c type - thumb blast, table type, t- rail type, hanger type, cont. Blast type etc. Depend on machine size, export quality wood packing
Hollow silver statue and indian god, elephant, and ather animalls in light weight silver electro formed well in finishing.All articals r 92.5silver, 999silver, avelable on request. Standared plastic paking.
Technical parameter The rated power of the area of hot zoneª1450f¦ The ways of mark the dimensionªgc d/l/m/d D --hot zone diameter ffd-- cold end diameter M --cold end lengthff n-- the length of spray aluminium zero L-- hot zone lengthff l --total length Our sic heating elements adopt special technics and can save you energy. Silicon carbide (sic) heating element is a non-metal electric heating element made from sic as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc. Used in the industries of glass, ceramic, machinery, analysis test, semiconductor, science & research and so on.
Ground granulated blast furnace slag 1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm) : nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.30 9. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes packed in i tonne or i.5 jumbo bags.
1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm): nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.309. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes( 1 tnnes and 1.5 tones in jumbo bags).
1.sintering and thermal treatment of hard alloy products. 2.precise temperature control. 3.non-protective gas operation. Vacuum Sinter Furnace is mainly used for the sintering and thermal treatment of hard alloy products. In operation, the sintering process is accomplished under vacuum state. The product features its precise temperature control, even inner temperature, non-protective gas operation, high performance and stable quality. This sintering equipment is suitable for hard alloy industry. Place of Origin Hunan, China (Mainland) Brand Name GaoXin Model Number GXZK-50 Usage Sintering Furnace Type Other Condition New Type Furnace Processing Type Machining Equipment .
The ball grinding method. 2.Hood made of stainless steel. 3.Safe running. The ball grinding mill adopts the ball grinding method. With its hood made of stainless steel, the machine is structured to ensure safe running. Materials wont be polluted when the powder is turned over, falls off or collected. It is especially suitable for production of alloy mixtures in large and medium-sized enterprises. Place of origin hunan, china (mainland) Brand name gaoxin Model number gxqm-100 Processing type machining equipment Type rolling mill.
1.drying and mixing. 2.mixing shaft with special structure. 3.chamber with smooth inner walls. 4.an airtight structure. Z Type Spiral Mixing Dryer refers to a new type of device integrating the functions of both drying and mixing. With areas contacting with materials made of stainless steel, the product features its mixing shaft with special structure and chamber with smooth inner walls. As the pneumatic system is employed to power the overturning of the mixing chamber that can be automatically tilted, the labor intensity can be greatly reduced. The drying process is accomplished within an airtight structure. The alcohol reclaim unit set in the device can collect the alcohol for reuse. Actual applications prove the device is especially suitable for plastic mixing and agitating processes in metallurgical industry. Place of Origin Hunan, China (Mainland) Brand Name GaoXin Model Number GXZH-50 Type dryer .
1.Evenness and precision of control. 2.The gases can be hydrogen, ammonia or air. The blue tungsten oxide furnace, also called turning tube furnace, is a must device in the powder metallurgy industry (especially the metallurgy of tungsten and molybdenum), whose main use is to turn the semifinished product apt (ammonium paratungstate) into blue tungsten oxide and molybdenum through the proper control of temperature, time, inside atmosphere and pressure in furnace. The pif-regulated control system, for the temperature control, consists of the thermal coupler, temperature controller and controllable silicon trigger and features its evenness and precision of control. The staying time of furnace materials can be set by changing the rotation speed and slant of the furnace tube on the basis of the process requirements. The gases in the furnace chamber can be customized as hydrogen, ammonia or air.
1.Running under the airtight state. 2.Enhance the reclamation rate of solvent. The vertical vacuum mixing dryer can replace the traditional single-spiral mixer, vibrating dryer and water heater, whose several processes can now be performed by the single dryer. Running under the airtight state, the dryer can improve the production environment and enhance the reclamation rate of solvent. Due to its compact structure comprising of the specially shaped mixing shafts installed in an intersecting manner and rotation vis-a-vis, the materials and additives can be evenly mixed. The scraper is used to remove the material to avoid the sticking of the inner walls. Brand name gaoxin Model number gxlsh-30 Processing type machining equipment Type dryer.
2 heat setting: 400w/800w high effciency, energy-saving safety tip-over switch safety thermal fuse and over heat protection high-temperature-resistant plastic housing, cool touch cabinet with handle carry, portable
Advantage: Heated by 1800C Molybdenum Disilicide (MoSi2) heating elements, Alumina tube size (Outer Diameter): 60mm, 80mm, 100mm, 51 steps programmable temperature control, Furnace can be vacuumed or filled with protection gas GSL1700 Tube furnace is advanced type of GSL-1600. It's heater by 1800C MoSi2 heating elements. This furnace is widely used in Material and Chemical laboratory used for heating all kinds new samples at vacuum or gas protection environment. Temperature is controlled by high accuracy controller which can reach to +/-1C, and it can set 51 steps temperature program. The highest working temperature of this furnace is 1750C. Furnace Tube High Purity Alumina Tube Sizes of Furnace Tube ID: 50mm / OD: 60 mmá x 1000 mm long Heating Elements á6 PCS 1800C á MOSI2 MAX. Temperature 1700C Working Temperature 1600C Temperature Control PID Auto Control, 51Steps Program The Fastest Heating Rate 10C / min Heating Zone Length á457 mm ( 18") Constant Temperature Zone 150 mmá (6") Temperature Accuracyá +/-1C Voltage single, 220V AC, 50/60 Hz Power Max. 5KW Size 550 L x450 W x670 Há mm Net Weight 150 kg ( 330 lbs ) Package Size á47" x 45"x 45"(1200L x 1150W x 1150Hmm) . In wooden box.
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 fª for the heat user; Our heat-conducting oil heating systems applied the Fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about f+ 1 fª and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end userf+s requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 fª, that is only to heat a temperature difference of 20-30 fª can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam runningf= steam reekingf=steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low Equipment Investment Due to the reason that the system of the heat-conducting is simplef=no water treatment equipment and more auxiliary equipmentf=low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental Protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution; 6. Widely Application It can be applied in the following areas: by high-temperature shapingf= plate heatingf= rubberf= dryingf= dyeing and printingf= chemical industryf= plywood productionf=rolled water-proof material productionf= asphalt heatingf=non-woven hot-rolled machine, fiber glass press machinef= reaction kettlef= mould f=drying roomf= oven and other heating required industries. In wooden cases
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
Vacuum cleaning furnace was used for cleaning the ordinary spinning plates, abnormal shaped spinneret plate, fine denier board, component housing for the terylene, polypropylene fiber, non-woven fabrics etc. Of the chemical fiber cleaning industry. It can also be used for washing the filter elements. It applied the principle that the synthetic polymer decomposed under the condition that isolating from the air in the vacuum state and the high temperature around 500 celsius degree. It owns the advantages of little environmental pollution, perfect cleaning of the spinning board, smoothed nozzle hole, extension the life of the spinneret board as well as shorter working hours, energy saving, easy to operate, good washing effect and high degree of automation etc. It is the updated products for replacing the triethylene glycol cleaning furnace and salt-bath furnace. Vacuum cleaning furnace is also applicable to the cleaning of the die-head and filter elements in the plastic industry.
Heating furnace.
1. Shaft furnace holding furnace up and down launder feeding device hydraulic transmission unit of holding furnace. 2. Shaft furnace holding furnace premixed burner of up and down launder include the control system multistage pressure blower system on-line automatic sampling controlled by plc co continuous automatic detecting system. Melting speed:6-20t/h Start time of melting:
Technical code 1. Melting furnace Upright cupola 2. Melting speed of copper plate 8-16t/h 3. Time of starting melt 2h 4. Material feeding mode Skip bucket style 5. Capacity of material feeding lifter 3t 6. type of heat retaining furnace hydraulic incline and action type 7. Effective volume of heat retaining furnace 6-10t 8. Max. incline and action angle of heat retaining furnace ¬â70 íµ 9. Oxygen consumed amount of copper furnace (copper bar per ton at normal production NG:50-70m3 LPG:40-60kg 10. shaft furnace and inner line of holding furnace All use sic molding brick 11. up and low flow slot Closed style integrated flow slot 12. fuel to be used NG/LPG 13. Diameter of gas supply NG:DN100-150/LPG:DN80-100.