Hand pumps Afridev deep well hand pump as per skat 2/1994, 3/1998 /4/2004. - upto 45 mtrs depth with discharge of 16.5 liters in a minute. India mark ii deep well hand pump as per is:9301/1990. - upto 45 mtrs depth with discharge of 15 liters in a minute. India mark iii [vlom] deep well hand pump as per is:13056/1991. - upto 45 mtrs depth with discharge of 15 liters in a minute. Extra deep well hand pumps as per is:13287/1992. - upto 90 mtrs depth with discharge of 12 liters in a minute. Unicef approved vlom 50 deep well hand pump. - upto 45 mtrs depth with discharge of 15 liters in a minute. 3m uganda mark 3 handpump as perskt specifications. Ghana modified india mark ii handpump. Mild steel bar /rods and s.S. Rods / bars To be given against specific consignment/requirements. Goods packedin export worthy packing
Structural characteristics Unique motor design Delrin impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Stainless steel body Carbon bush Stainless steel thrust ring Stainless shaft , strainer and coupling Operating conditions Clean water not containing abrasive particles Liquid temperature up to 35ª c The cooling media temperature should not be more than 40ª c Motor 2-pole, single phase, 50 hz, 220-240 v Insulation class b Protection ip 57
Comins water pump
Submersible pump set 20 to 35 kg. 1 pies packing
Water cooler pump with 1" stamping. Stamping is of the material of crc. Shaft consists of en8 material. 12 Pcs.
diesel engine water pump is used for industrial and city clean water supply and drainage, irrigation, fire protection, long distance water supply, metallurgy, chemical, textile, china processing, pigment, paper making, etc.
Fuel Pressure Regulator For " Audi & Volkswagen " Part Number : 7P0919679A
Hydraulic Oil Pump Rated pressure:10000psi Flow rate at 1500rpm:0.64L/min Inlet port:1/2 FNPT Outlet port: 1/4FNPT This pump is a plunger pump, it needs to be driven by a motor and recommend using electric motor. It requires very little power, so solar energy can be used as an energy source for its motor. These pumps are used on wellhead control panel systems, Power packs on high-torque service tools. The pump application medium is hydraulic oil and it needs to be installed at a lower position than the tank. Before staring the pump, you must vent the air in the pump chamber.
MACHINE Mode l: Mr. SOFTY FLOOR/P (TWIN FLAVOR SOFTY ICE CREAM) (two flavor + one mix flavor) FLOOR MODEL WITH PUMP (Its Give over run up to 80%) (increases the volume Up to 80%) 1. Capacity 425 cones per hour (31 kg-53 Ltr./Hr.) 2. Tank (Hopper) Capacity : 8 + 8 Ltr. 3. Available Model-1 phase (230 Volt) 50Hz and 3 phase (420 Volt) 50Hz 4. Dimension (m.m) width 510 x depth 725 x height 1400
Flow: 7m3/h Head: 15m Power: 0.75kw Material: cast iron Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Flow: 7m3/h Head: 18m Power: 1.1kw Material: cast iron Outlet dia: 40mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Flow: 15m3/h Head: 7m Power: 0.75kw Material: cast iron Outlet dia: 65mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Product Parameter Character Model ZL25-02G2 Working Voltage Range DC: 4.5V-12V Rating Power 4.5V: 0.5-2W / 6V: 1-3W / 12V: 2-3W Static Water Head 0.4-2 M Static Flow Rate 0.6-1.8 L/min Lifespan Continuous operation under normal working surrounding >20000Hr Working Environment Liquid: From weak acid to weak base?workable both on land and in water (Submersible) Max Noise Under normal working condition, 1M distance over the test instrument
Product Parameter: Character ModelZL38-11 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-12W/12V: 3-18W/24V: 5-25W Static Water Head1-7 M Static Flow Rate4-10 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base, workable in water (Submerged) Max NoiseUnder normal working status, 1M distance over test instrument
Technical Parameter Character ModelZL32-13 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-6W / 12V: 3-6W / 24V: 4-7W Static Water Head0.6-3 M Static Flow Rate0.8-2.7 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base?workable both on land and in water (Submersible) Max NoiseUnder normal working status, 1M distance over test instrument
Product Parameter Character ModelZL38-33 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-12W/12V: 3-18W/24V: 5-25W Static Water Head1-5 M Static Flow Rate5-13 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base, workable on land (Non submersible) Max NoiseUnder normal working status, 1M distance over test instrument
Technical Parameter Character ModelZL32-02 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-6W / 12V: 3-6W / 24V: 4-7W Static Water Head1.0-2.5 M Static Flow Rate2.0-3.5 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base?work in water (Submerged) Max NoiseUnder normal working status, 1M distance over test instrument
Character Model: ZL25-02 Working Voltage Range DC: 4.5V-12V Rating Power 4.5V: 0.5-2W/ 6V: 1-3W /12V: 2-3W Static Water Head: 0.4-2 M Static Flow Rate: 0.6-1.8 L/min Lifespan: Continuous operation under normal working surrounding >20000Hr Working Environment Liquid: From weak acid to weak base?workable both on land and in water (Submersible) Max Noise: Under normal working condition, 1M distance over the test instrument
The material is by pressureless sintering high-performance sub-micron sic powder and dense sic ceramic products, excluding free silicon and tiny grains, high temperature resistance, high strength, high hardness, high corrosion resistance, oxidation resistance and other excellent performance, is the international and domestic manufacturing mechanical seal ring, blast nozzle, and magnetic drive pump, shield pump body armor components preferred common material, especially suitable for the transmission of strong acid, strong alkali corrosive medium, such as the conditions of use.
A&s pump co., ltd will be glad to cooperate with you. Here at a&s pump co., ltd, we offer the following pumps: iwaki magnetic drive pumps, richer magnetic drive pumps, sunsun air pumps, ilmvac pumps, flojet pumps, verderair pumps, armek pumps, kuobao pumps, march pumps, mikawa pumps, pan world pumps, sanso pumps, wilo pumps, almatec pumps, shurflo pumps, hypro pumps, jabsco pumps, ingersoll rand pumps, dayton pumps, binks pumps. Original seal package
