SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Type/size of seperator: W x T 122 x 1.4 130 x 1.7 138 x 1.1 140 x 1.8 139 x 1.8.
Type - NR : 55423 Replacement Type - NR : 55218, 55427, 55531 Hold down : B3 Assembly layout : 0 Capacity (Ah) 20 Hrs rate : 54 Cold cranking : 300 Dimension L 249 W 175 H 175.
Type : 40 L Volt : 12 Number of plate/cell : 9 Capacity (Ah) 20 Hrs rate : 32 Cold cranking : 250 Dimension L 195 W 125 H 198 T.H 220.
Type - NR : 54533 Replacement Type - NR : 54519 Hold down : B4 Assembly layout : 0 Capacity (Ah) 20 Hrs rate : 45 Cold cranking : 190 Dimension L 249 W 175 H 175.
Type volts (ah)capacity 20 hr no plate/cell 12 n24-4 12 26 9 Ns40/l 12 32 9 Ns40 z/l 12 36 11 N40/l 12 40 9 Ns60/l 12 45 11 Ns60 s/sl 12 45 11 N50/l 12 50 9 N50 z/l 12 60 11 Ns70/l 12 65 13 N70/l 12 70 13 N70z/zl 12 75 15 Nx120-7 12 85 15 N100 12 100 17 55d23 12 60 11 N120 12 120 21 N150 12 150 25 N200 12 200 31 N200 12 200 33
Our company only produce high quality automotive battery and high impact resistance battery container with competitive price and fast shipping, polyproplene battery container, battery separator.
Our company only produce high quality automotive battery and high impact resistance battery container with competitive price and fast shipping, polyproplene battery container, battery separator.
100AH Lead Acid Automotive Battery in Maintenance Free Container
150 AH Lead Acid Automotive Battery with Maintenance Free Container
35 AH Lead Acid Automotive Battery with Maintenance Free Container
60AH Lead Acid Automotive Battery in Maintenance Free Container
80AH Lead Acid Automotive Battery in Maintenance Free Container
TGB, TDB Serie VRLA / SLA Batteries AGM Batteries are maintenance free batteries used in general electrical equipment such as UPS, safety, alarm systems, emergency lighting and security systems. TGEL Series Deep Cycle VRLA / SLA Battery, Dry Battery, Maintenance Free With Nano Gel AGM Technology, Gels are more resistant to Gel and M, better Disc Disc Discharge and can be used well. The light that flows is very small, suitable for receiving energy such as solar cell solar cells or wind turbines.
The turntable is designed to transport vehicles across the track and can be rotated 60 degrees, 90 degrees and 120 degrees in factories to achieve rapid adjustment of railway vehicles. The working principle is that: the guide rail is also mounted on the turntable, When the rail transport vehicle is running on the turntable, the turntable can be rotated automatically or manually until it is accurately attached to the target rail and then the transport vehicle is running on the vertical rail. The turntable is suitable for a variety of applications, such as round rails, vertical rails, cross rails, and more. The turntable system runs smoothly and has high rail connection accuracy, the PLC can be installed to meet fully automated electrical operation.
Basic information BatteryStandard:IEC Modely:12N9-BS ms Size (mm) L*W*H*TH:136*75*133mm Capacity:12V9AH Design Service Life:1.5 years Packing:Normal neutral carton packing Battery Coloer:Black
Lithium-ion motorcycle battery 12.8V48Wh 148*86*105mm CCA:280 Replacement model: YTZ12S YTZ14S YTX12-BS YTX12A-BS YTX14-BS YTX14H-BS KMX14-BS
Rechargeable 12V 30000mAh Battery Packs Description: Capacity: 30000mAh Voltage: 12V Pack: PVC Shrink tube Prewired: AWG 12# Leading wires(as per customer's requirement) Specification: Charging Voltage: 14.6V CC/CV Maximal continuous charging current: 30A(Recommanded less than 15A) Over charge protection: Over charge detection voltage: 4.28V +/- 0.025V Over charge release voltage: 4.08 +/- 0.025V Over discharge protection: Over discharge detection voltage: 3.0V +/- 0.05V Over discharge release voltage: 3.0V +/- 0.05V Over Current protection Short circuit protection: Exterior Short Circuit and can be automatic recovery Operating Temperature: Charging temperature: 0 +/- 45 C degrees Discharging temperature: -20 +/- 60 C degrees Storage temperature: -20 +/- 45 C degrees Applications: Golf trolleys, Garden equipments, Portable equipments, Wheel chairs, Solar and wind mill units, Medical equipments, Flash units, Portable video/radio, Traffic lights, Street signs, Boats or buoys, Cottage camping, SOS pillars, Toys and hobby applications, Portable equipments for communication, testing, distance measuring, Pump system, Telecommunication backup Power plants, Burglar alarms, Medical equipments (stationary and portable i.e. X- ray), Computer back-up (high power), Communication systems, Fire alarm systems, Transmitter systems, Cash register systems, Emergency lights signal systems, Telephone systems, Clocks systems, Uninterrupted power supplies, Elevators emergency power supply (skyscrapers), Solar applications, Mobile stations, Airport / runway emergency illumination, Emergency power supply for hospitals, Radar and satellite stations, most powerful LEVs, such as electric bicycles, electric unicycles, electric tricycles, electric scooters, electric boards, electric wheelchairs, Stereo Systems, Boats & RVs, Hydraulic Lifts, Winches, On-board Electronics, Golf carts, Electric resort cars, Marine, Electric utility vehicles, Electric Boats, Solar/Wind Power Systems, Medical application, Electric forklifts, RVs, Scrapers, Electric Sightseeing Cars, Toy Cars, Mini-trucks, The Transportation without Driver, etc.
Dry charge car battery Good quality with best prices Shortest delivery time 15-25 days Oem services available Incredible cranking power , capacity and vibbrations resistance Out standing service life Specification: Standard: jis ( japan's jis & asia standard ) Sort: dry charge battery & low maintenance automotive battery Size ( mm ): l*w*h*th=310*170*200*225mm Voltage ( v ): 12 Rated capacity ( 20hr, ah ):75 Rc & reserve capacity ( min ): 113 Cca & cranking amps ( -180c, a ): 580 Approx wt. ( kgs ): 14.00 Layout: 1 (+ | -) or 0( - | + ) Terminal type: a ( standard terminal ) Certification: Iso9001:2000, iso14001, ce, ul, etc Quanlity warranty: The quality guarantee is 13 months from our manufacture date or b/l date. We will replace any defective batteris by new ones at our cost or you can deduct the same amount of defective batteries if there is any. Application scope: Starting batteries of auto/automobile, cars, trucks, motorcycles, ships, marine boats and other vehicles. Our services and advantages: A. Small moq. B. Professional information management system . C. Oem, odm service available. D. Good reputation in quality, E. We are the factory, we are the source, which is lower price than foreign trade company. F. Fast delivery and best packaging . G. Excellent technology and technicians (more than 15-year experience) H. Up to 36-month month warranty. I. Multi speak language staffs. J. Excellent after sales services. Battery quality is quite essential to both of us, we consider that high quality, low price, mutual benefits will be good basis of our long-term cooperation!!!