1. In order to satisify the need of high fastness to light in the textile printing market, JINCOLOR developed a brand new set of Light Fastness 500hrs x 0.3% Pigment Printing Colorant. They can apply on beach chair, beach umbrella, curtain clothesíKetc.
2. This series light fastness is excellent. Some of the colorants can pass 800 hours light fastness tests. The other characteristics such as heating fastness, rubbing fastness, migration fastness, etcíK are also performed excellently.
3. This series does not contain forbidden substances such as NPEO, Formaldehyde, 24 item Azo, etc. This series complies with the regulations of Okeo-Tex Standard 100.
4. Jincolor can provide Light Fastness 0.3% certified test reports.
1). Standard series semi transluscent.
2). Opaque series opacity to extent.
3). High opaque series, performing higher opacity for darks.
4). High stretch series for transfer producing.
5). Process cmyk for soft finish photo wet on wet.
6). Process bryk for deeper photo effect.
7). Process cmyk litho inks (pvc free) wet on wet.
8). Process highlight white: - print onto the specially cutout highlight needed in multicolor effect.
9). Backup white litho : - applying backup opaque litho white adhesive onto the pre-printed offset transfer multicolor sheet excellent opacity bond stretch and transferability.
10). Backup printable adh : - a) for more extra stretch on the backup white.
B) apply on the pre-printed offset sheet and transfer on
White t-shirt. No need for white when you are
Transferring the image on white t-shirt
C) good stretchability and wash fastness.
GS Series is a solvent-based screen ink which applicable to most of the transparent plastics, especially for PET, PC, PVC, acrylic and glass. Perfect mirror effect achieved on substrates with the highest degree of transparency for light reflections. With the fine metallic particles in 10úgm, treated distinctively and the synthetic resin resulting in an innovative product, the stylish mirror effect could be simply done by printing. The series typically reaches its boiling point at 76óJ relative to the degree of dissolution.
Applications: Mesh 300 íV 350 polyester mesh (120T íV 140T) Stencil Any direct emulsion and capillary film which are solvent resistant. Squeegee Sharp edge, 65ﾟíV 85ﾟblade Dilution GS series is formulated to print from the container with excellent properties, add FM-005 Thinner while necessary to assure the excellent mirror effect. Should be well mixed before printing and fastened during storage. Curing (PC, PET) by solvent evaporation and forced dry at 120 íV 130óJ in 20 íV 30 minutes, 40 minutes at humidity. (PVC, PMMA) by solvent evaporation. Surface dry at room temperature then forced dry at 30 íV 40óJ in 20 íV 30 minutes. (Glass) by solvent evaporation. Leave idle in 2 íV 3 minutes and forced dry at cool temperature in 15 minutes, then 130óJ in another 20 minutes for excellent adhesive performance. Wash-up By specific Screen Wash. Storage Dry indoor below 75% humidity in 90 days from the date of manufacture.
Standard Colors:
GS-1200 Black
GS-1212 Magenta
GS-1214 Silver
GS-1239 Blue
GS-1250 Rich Gold
GS-1251 Champagne
GS-1255 Pale Gold
GS-1259 Copper
Ink oils are used for offset printing ink, and consisted of hydrocarbon
Solvent with high boiling point this solvents are very compatible with
Resin, and has excellent tack, luster, and drying nature.
Return policy
If the return is caused by the product quality or the mistake from us, you will be guaranteed to get 100% refund.
Freight charge policy
Back much little repair
Our digital duplicator ink features as follows:
1. smells good because of using top quality material and purified water take.
2. much black than any other ink.
3. double sides printing.
4. quality stable.
5. one place one agent policy to protect our agents benefit.
Digital duplicator ink
1) Models: GR/RA/RC
Volume: 1000ml
Inner packing: 2pcs/box
Box dimensions: 170 x 90 x 270mm
Outer packing: 5boxes/ctn
Carton dimensions: 460 x 185 x 275mm
100% compatible with original ink.
Produced in the most advanced dust-free workshop.
With third time filtration, particulate at size in 0.2, which can filter out the impurities and particles in the ink so as to avoid jamming of the nozzle, never jam the nozzle.
The color paste is imported from USA and the chemical additive is from Germany and Japan, the formula is supplied by Japanese specialist.
It is the famous Japanese brands with the color printed by this dye ink is 100% as original image.
