Features
The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK
Acceptable for the most 14 10M, 100M, or 1000M Media Converters within a rack-mountable chassis which is supplied with unified power
Supplying the Converters or Powers to be plugged and played
It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance
2U high: 19-inch standard design
Technical specifications
Capacity: 14 slots available
Power: Input: AC 100 - 260V, 50-60Hz; Output: DC +5V 12A
Power protection: protection from over voltage, over current and short circuit.
Working temperatureú¦0-50íµ
Storage temperatureú¦-20íµ-70íµ
Relative humidityú¦5%-95%
Dimensions: 485 (wide) x 245 (length) x 90 (high) mm
With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km).
Details about one modle of atop's sfp transceiver here.
Product features
Upto 1.25gb/s duplex data links
Hot-pluggable sfp footprint
1310nm fabry-perot laser transmitter
Duplex lc connector
Rohs compliant and lead free
Upto 20 km on 9/125
Metal enclosure for lower emi
Single 3.3v power supply
Low power dissipation <600mw
Commercial operating temperature range: 0 centigrade to 70 centigrade
Ddm is also available
Cwdm is also available
General
Atop's ap-s31121-3cxl20 small form factor pluggable (sfp) transceivers are compatible with the small form factor pluggable multi-sourcing agreement (msa). They simultaneously comply with gigabit ethernet as specified in ieee std 802.3 and 1x fibre channel as defined in fc-pi-2 rev. 10.0 .They are rohs compliant and lead-free.
With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here.
Product features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Uncooled DFB laser transmitter in 8 possible CWDM wavelengths
Duplex LC connector
RoHS compliant and Lead Free
Up to 80 km on 9/125
Metal enclosure for lower EMI
Single 3.3V power supply
Low power dissipation <600mW
Commercial operating temperature range: 0centigrade to 70 centigrade
General
ATOP's AP-SCxx125-3CxLxx CWDM Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free.
Compliant with iec 60825-1 class 1/cdrhclass i laser eye safe
Rohs compliant products available
Applications:
Switch to switch interface
Switched backplane applications
Router/server interface
Other optical transmission systems
Description:
Atop ag-5524-bz8 transceiver is a high performance, cost effective module supporting dual data-rate of 1.25gbps/1.0625gbps and 80km transmission distance on smf. It is fully compatible with gigabit interface converter (gbic) specification (sff-8053), rev5.5. It can be inserted in or removed from host chassis without shutting power of the host system. It uses 1550 nm dfb laser for lr-2 applications, cwdm is also available.
Standards:
Compatible with gbic specification (sff-8053), rev 5.5
Compatible with ieee 802.3z
Compatible with ansi specifications for fibre channel
Compatible with fda 21 cfr 1040.10 and 1040.11, class
1. Maintain hundreds of pc=maintain one piece!
2. Network recovery, remotely install software on the pc clients, software and files distribution, remote monitor and control, schedule management.
3.Returnstar network maintenance system is free software.
Network Investigation Toolkit (NIT) is designed specially by Decision Group for LEA such as Police, Military, Criminal Investigation Agencies, National Security Agencies, Cyber Security Agencies, Counter Terrorism Department, Forensics Investigator etc. to conduct network based forensics investigation whether it is on a Wired or Wireless LAN networks. NIT is a portable unit (laptop based) with comprehensive network forensics features which can be carried at any location for network based investigation task. NIT can be used to intercept on targeted networks or users to collect the necessary evidences and trace out the source of communication. The unique capability of this system is its combination of various features and functions to conduct LAN real-time interception, WLAN real-time interception, HTTPS/SSL MITM interception on both LAN and WLAN networks as well as offline analysis and reconstruction of pre-captured raw data files. The 3.5G/HSDPA USB Adapter is included in the package for user to remote access and manage the system.
2606 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
1.HSDPA/UMTS(900/2100MHz)
2.GSM/GPRS/EDGE(850/900/1800/1900MHz)
3.Support 7.2Mbps HSDPA services
4.MicroSD Card Slot
5.Support PC voice (optional) and SMS services
6.Support data statistics
7.Plug & Play
8.Support Windows 2000/XP/Vista and Mac Operating Systems
Cat modem can turn any normal power socket into network interface. Without extral wiring, you can go online and browse the website, send and receive emails, or datatransfering, only simpely plug eglobal cat modem. And the cat modem have 128-bit des (data encryption security) data encryption protection, which makes sure of the security of data transmission
Features:
Ideal solution for connecting pcs, games consoles and digital media adapters to the network
Simple plug-and-play installation
Use existing electrical wiring
Plug one egplc cat modem into your router and nearby electrical socket, then plug a second cat modem into an electrical socket near to the device you wish to network¹
Built-in quality of service (qos) enables smooth video streaming, gaming and uninterrupted telephone calls via the internet
Transfer large files to networked storage devices
Supports up to 16 egplc cat modem units on one home network
Co-exists with other homeplug compatible products
Egplc cat modem technical parameters:
L 16 managed to provide quality of service (qos)
L in line with the global range of electromagnetic compatibility (emc) requirements
L a full range of indoor coverage (network)
L self-configuration. Plug and play
T connect with the network to normal, that flicker in the transmission of data
The unit applies the imported high linear dfb laser with low noise, big transmission capability and small nonlinear distortion. It is completed with reliable apc (automatic power control) circuit for light power output and atc (automatic temperature control) for thermo-electric cooler, mgc (manual gain control) and agc (automatic gain control) circuit for distortior input radio-frequency drive current. Agc applies the automatic digital processing technology for radio frequency power, by which the driving level power can be automatically processed according to the level of input radio frequency and the channel quantity, and the output level of the optical receiver can keep constant to maintain the cso, ctb and c/n indexes at the optimum state all the time, thus to ensure the stable operation of the chain indexes and the laser all through its service life.
A gaas element is adopted as the preamplifier, which not only lowers the input level and adds a radio frequency predistortion circuit, but also enhances the cso, ctb and c/n indexes. The built-in microprocessor software provides multiple functions including real-time monitoring for the transmitter operating state, digital display, aural-visual alarm and network management. Once an operational parameter of the laser runs out of the preconfigured allowable range, the power supply to the laser will be automatically switched off, and the red indicator will flash for warning. The embedded blue screen lcd on the front panel indicates various tasks of the unit, parameters and fault messages in chinese distinctly.
The optical transmitter provides standards rs-232 and rs-485 interfaces for network management and remote monitoring. The optical transmitter applies standard 19fª 1u rack, which is provided with high efficient switching power supply for transmitting catv, telephone, and digital or compressed digital data.
OEM/ODM serveice available.
Based on w-cdma and can be compatible with gsm networks
Can connect to phone, pbx, voip, ip-pbx , billing meter and etc.
Support connecting with internet through usb line and can surf the internet wirelessy. The pc computer can send and receive text messages by its connection
Can lock sim card
Support caller id with dtmf/fsk
Dtmf and pulse dialing
Support sms
Reversal polarity signal supported for billing charging
Making and answering calls after connecting to telephone set
2rj-11 ports can support connect with extension
Real time displaying of wireless network signal strenght
Technique parameters
Multimode operation ¿chsupa/hsdpa/umts/edge/gprs/gsm
Triple-band hsdpa/umts 850/1900/2100 mhz
Quad-band edge/gprs/gsm 850/900/1800/1900 mhz
Hsupa uplink up to 2.0 mbps
Hsdpa downlink up to 7.2 mbps
Wcdma (umts) uplink data rate up to 384 kbps
Edge data up to 237 kbps dl and 118kbps ul, 3gpp release4, class 12
Gprs data up to 85.6 kbps dl and 42.8 kbps ul
Power supply: dc12 v
Output power:
Class 3 for umts/hsdpa/hsupa
Class 4 for gsm 900
Class 1 for gsm 1800
Class e2 for edge 900/1800
Usb: usb 2.0 full speed
Antenna interface:
Antenna gainú¦ >1.5dbm
Sensitivity: < -104 dbm
Antenna transimission power: < 3 w
Working environment ú¦
Operating temperature: -10 ~ +55íµ
Storage temperature: -40 ~ +80íµ
Atmosphere pressure:86-106kpa
Environment noise:ú+60db
Rj-11 phone interfaceú¦
On hook voltage: 45v
Off hook current: 30ma/41ma
Dialing tone frequency : 450hz
