The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
Product Features 4 WDM lanes MUX/DEMUX design 4 WDM channels are 1296, 1300, 1305 and 1309 nm Hot-pluggable CFP2 footprint RoHS compliant and Lead Free Up to 10Km link length Power dissipation
Sell POE Industrial Switch 1 SPF + 6 RJ45 Port Description: It provides a stable and reliable Ethernet transmission offered by Opticombine, with high-quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence, and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The Industrial Media Converter complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy maintenance. It offers redundant mechanisms for critical applications that need always-on connections. Features: 1. Support Auto-MDIX, and full/half-duplex self-negotiation mode 2. Provide SC/LC/FC/ST interface fiber port & support single/dual fiber transmission 3. Support 10K Bytes giant frame, compatible with various extension protocol 4. Support IEEE802.3az energy-efficient Ethernet technology 5. 4K MAC address table Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment, and components. It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities. We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation â?? knowing that our employees are the key to our success.CC: CC:
Sell POE Industrial Switch 1X10/100 Base + 1 RJ45 Port Description: It provides a stable and reliable Ethernet transmission offered by Opticombine, with high-quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence, and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. Features: 1. Support Auto-MDIX, and full/half-duplex self-negotiation mode 2. Provide SC/LC/FC/ST interface fiber port & support single/dual fiber transmission 3. Support 10K Bytes giant frame, compatible with various extension protocol 4. Support IEEE802.3az energy-efficient Ethernet technology 5. 4K MAC address table 6. Support IPv6 Protocol 7. Electric 8KV surge protection, easy to use in an outdoor environment 8. Complete status indicator, working state at a glance 9. Power input polarity protection design, no worry about the wrong operation Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticconnectors, fiber optic consumable products, active & passive network equipment and components. It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities. We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation â?? knowing that our employees are the key to our success. CC:
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 1 ambient sensor input for monitoring onsite temperature and humidity; 8. Resend the data while communication failure and alert to users by SMS; 9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 15. Inbuilt 8G SD card to save up to 100000 historical data and events; 16. Inbuilt large capacity automatically rechargeable backup battery; 17. Industrial class design suitable for long time work applications; 18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The GSM 3G 4G LTE Environmental Monitoring Alarm is special for remotely monitoring onsite temperature,humidity,power status through wireless GSM/3G/4G Network.When the temperature,humidity, power voltage exceed high threshold or low threshold value,will send SMS alert to upto 10 preset mobile phone immediately,It supports Modbus TCP and Modbus RTU Over TCP,can be integrated to Cloud Platform. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Environmental Monitoring Alarm,rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring'; 3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage); 4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence; 5. One Temperature & Humidity sensor input, measures temperatures from -40-80�°C,0.5�°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%; 6. External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU Over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
KPIIOT (King Pigeon Industrial Internet of Things Cloud Platform) is a million-level access industrial IoT cloud platform. The scientific architecture design can quickly and cost-effectively realize the customer's demand for customized cloud platform and meet the customer's customer demand for cloud platform customization.
The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first 'ring'; 3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity); 4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence; 5. 1 input for Temperature & Humidity,AC power status monitoring; 6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM/3G/4G Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally; Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions; Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission; Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection; Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points It can monitor the terminal battery level in real time to ensure that the device data does not drop.
The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc. 1. Can be used as a complete product or as a secondary development module; 2. Two working modes are available: Normal mode: Real-time data transmission,Users can inquiry the real-time status; Low power consumption mode: Ultra low power consumption(ï¼?230uA); 3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc; 4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network; 5. Support configure parameters and query real-time data via SMS,software,cloud platform; 6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message; 7. Support two different server centers,can set IP address or domain name ; 8. Support Modbus RTU over TCP and MQTT protocol; 9. Wide range power supply 7~24VDC with phase-reversal protection; 10. Using Nano sim card,support PIN code function; 11. Provide PCBA or waterproof enclosure,can be used outside.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. 1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection; 3. Management and configuration via LAN connection configuration software for easy operation and maintenance; 4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol; 5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 6. High sampling frequency and special filtering strategy to ensure reliability; 7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules; 8. Supports register mapping function and extend I/O inquiry strategy; 9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Mikrotik, Supermicro, Linksys, and Other Open Switches. 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.) Easy to use: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports. High Quality: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch. After-sales Service: 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us.
1x Multimode Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. Equiped with high-quality chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte. Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Only 93mm x 72mm x 27mm(3.7"x 2.8"x 1.1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space. Product List: 1x Gigabit Ethernet Media Converter, 1x 1000Base-SX SFP module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee, lifetime tech support.
Specification Item:2 gang 13A Switch wall socket with USB charger Code Number:P23U1R1 Rated current:13A Voltage:AC 220-250V IP grade:IP20 Cover plate:PC Frame:PC Base:PA66+25% glass fiber On/Off operation:Switch: 15000 times/ Socket: 15000 times Fixing screw:M3.5*P0.6*24mm Mounting box depth:35mm Standard:BS546, BS 1363-2 Packing Details: Inner Box (1PC):148*91*34mm Box (10PCS):180*155*97mm Carton (100PCS):550*375*175SSmm USB Function Description: Input:220-240 V 50/60 Hz; Output:DC 5V Max 2100mA; Environment Interior Temperature:-5â??-39â??; Charge:Iphones, Ipad and other MP3, Mobile Phones, PDAs & Digital Cameras etc. Advantage This product adopts innovative shape design, beautiful radian, elegant structure, flexible modular structure, easy installation and disassembly, rich combination of face frames, complete product function range. How To Use Products 1. The total power of the connected electrical appliances shall not exceed the rated power. 2. It is strictly forbidden to tie wires in order to avoid abnormal overheating. 3. Please do not use in humid environment. 4. Do not use in case of damaged sockets and wires. 5. Do not disassemble without authorization. 6. Do not use wet hand to plug in and pull out plugs. 7. Do not place boards where children can touch them.
