A. Product Specification Energy Efficient Tubelight Retrofit Assembly suitable for general lighting service complete with electronic ballast,G-5 Cap and conforming to IS:2418. It shall be suitable to replace the existing assembly of FTL of 36W and 40W with EM choke satisfying following criteria and also the Mandatory Technical Specifications given in Annexure I on Page No. 20. T-5 Lamp, 28W, Colour temperature 6000K, Rated Lumens 2400, Minimum Rated Average Life 15000 hrs. should be satisfying following criteria: a) Lumen Maintenance after 2000 hrs. of operation including the ageing period shall not be less than 95% of declared value. b) Lumen Maintenance after 70% of rated life including the ageing period shall not less than 90% of declared value. c) Lumen Maintenance after 90% of rated life including the ageing period shall not be less than 85% of declared value. Technical Specifications for Electronic Ballast 1. The Ballasts shall satisfy at rated voltage all performance requirements, shall work satisfactorily in the input voltage range of 130Vto 300V.
1 High quality metal body, Aluminium body with coated plastic 2 Installed with efficient and energy saving electronic ballast 3 Tube specification: T5 8w, 14w, 21w, 28w, 35w, 49w,54w 4 PF>95%,THD99%,THD
Power: 14w,28w,35w IP rating: IP65 Material: ABS/PC Features: 1.Use high quality electronic ballast,PF>95%,THD
2*14w adapter Power: 14w,28w Technical data: PF>95%,THD
Construction: Pressed & folded sheet steel Pre treated and epoxy powder coated finish Moulded end caps German Alanod aluminium reflector Moulded acrylic diffuser Schools/ offices/ kitchens: Designed as a modern fluorescent luminaire while providing functionality for a wide Varity of lighting solutions. The Uni T5 is high performance fixture with the latest technology providing energy efficient operation with a high light output ratio and a long service life. MX464-Y36x2 T8,2x36W 1255x208x70mm 1295x385x220mm MX464-Y36x2 T8,2x36W 1255x208x70mm 1295x385x220mm MX464-Y58x2 T8,2x58W 1540x208x70mm 1580x410x235mm MX464-Y58x2 T8,2x58W 1540x208x70mm 1580x410x235mm MX464-Y18x2 T8,2x18W 645x208x70mm 685x385x220mm MX464-Y18x2 T8,2x18W 645x208x70mm 685x385x220mm
T8 waterproof fluorescent fitting.
Dimmension:650*75*55mm Max.Watt:1*18W IP Rating:IP20 Carton Box Size:68*20*37cm Pcs Per Carton:12 Materials available:PS/ABS PC/ABS Lamp:T8 Fluorescent Tube.
Model:Jlh-218b Watt: 2¡á18w Assembled by plastics & matel , h=1.4m Color in yellow Area of uses:house/garden /avenues/wilderness 220v-240v~, 50hz 110v~, 60hz.
Body 1.Injection moulded 2.Round opaque UV stabilized PC body 3.Water proof gasket in natural silicon gel 4.Fix the reflector by í¦Tí¦ shape 5.Closing clips in PC or stainless steel with optional locking screws ofr vandal proff function Reflector 1.White-coated round shape flat metal plate Diffuser 1. Injection moulded 2.Round shape transparent UV stablilized PC diffuser 3.Highly impact resistant 4.It features prismatic design with good anti-glare effect
Body 1. Injection moulded 2.Opaque UV PC body 3.Water proof gasket in natural silicon gel 4.With reinforcing ribs 5.Fix the reflector by shape rotated supports with plastic hinging rope conneted the body for easy installation and maintenace 6. Closing clips in PC or stainless steel 7. Vandal proof,clips should be opened by tool,not by hand Reflector 1. White-coated flat metal plate Diffuser 1.Injection moulded 2. transparent UV stablilized PC diffuser 3. Highly impact resistant 4. It features prismatic design with good anit-dazzling effect
Body 1.Injection moulded 2. Opaque UV stabilized PC body 3.Water proof gasket in natural silicon gel 4.Stainless steel clips only 5.Compared with the conventional aluminum die casing flood lamps,it is much less weight,much less cost and much energy saving and more convenience for installation 6.Two clips at one end could make the diffuser suspended once opened Reflector 1.Mirror aluminum reflector Diffuser 1.Injection moulded 2.Transparent UV stablilized PC diffuser 3.Highly impact resistant 4.The granule prismatic design hides the electrical compenents inside
Slim design, high efficiency : lamp body is thin, suitable for slim install space and reduce light lost Panel unify style, elegant appearance, easy match with ceiling, defend dizzy Bottom use curve reflector , increase light efficiency Ddp-q52314 3x14w Carton
1.Soft light and uv proof, reduce dizzy 2.Grounding, more safety 3.High quality powder coating, prevent scratch Carton
1. The material is aluminum 2. It is screw type 3. Best price 4. B22, E27,E40 are all available . the packing size is plastic bags.
*Total 384 channels *30 banks of 8 programmable scenes *16 slider for manual control of channels *Midi control over banks, chases and blackout *Run last CHASE or BANK continouse when power on again *Record up to 6 programmable chases with fade time and speeds *LED function and program display *Built in microphone for music trigeriring *Auto mode program controlled by speed and fade time sliders *Midi control over banks, chases and blackout *DMX polarity selector *Power failure memory *LED lamp connector *Power input: DC 9-12V 300ma *Audio input: By built-in microphone or line in 100mv-1vpp *DMX input / output: 3 pin male/femal XRL *Dimensions: 520 * 183 * 73mm *Weight: 3kg.
It is 6x6 cutting size fixture . 20pcs.
Quickvise serie products are specially designed to fasten h-t wires without any supporinting tool. Simply insert the wire into the hole of quickvise, the wire is gripped by spring-loaded clamps in the quickvise which tighten more securely as the wires are pulled harder. While using quickvise , a 3/8 inch hole should be drilled in the end of the end post for the wire, the wire is then inserted through the quickvise which automatically holds the wire by its unique patented jaw system. Catalog number strand range(mm) minimum holding strength(lbs/kg) Quickvise -6056 2.0-2.5 1148lbs/520kg Quickvise -6058 2.6-2.9 1545lbs/700kg Quickvise -6062 3.0-3.5 2250lbs/1020kg Quickvise -6064 3.6-4.0 3240lbs/1470kg
Highly efficient and energy-saving electronic ballast, easy to start up, noiseless, no flickering and long service life. Lampholder is made of fireproof material, safe and reliable. High power factor, not interfering other electrical appliances in use. Extra-thin design, lightweight and beautiful outlook, easier to install. 10W to 65W power, with single or double tubes optional, can be used in places such as deluxe offices, supermarkets and homes, etc. 24pcs/ctn.
Infrared Ray Lampshade : Specification as follows: LA-305REF LA-505REF PB-E 305 PB-E 310 PB-E 510.
1. Technology outline of EEFL This lamp has its electrode outside of the lamp. It's quite opposite from that of general fluorescent lamp. The light source of this lamp is Plasma which is derived by External electrode of electric field inside the lamp. Because of this technology, this lamp does not generate heat itself and enhances the lifetime and the illumination stability incredibly and improves brightness efficiency. This lamp is absolutely next generation of fluorescent lamp for lighting. 2. Features of EEFL Lamp Long life time - Unbelievably long life time because of its electrode structure. Wide range of application íí-Can be applied to wide range of application such as very narrow space and subway station etc where the moving line is very Important as O.D of the lamp is very slim (+ 4.0mm). - When take this lamp as lighting source for the wide color frame, the thickness of the frame can be made within 50mm and after assembling, the weight of the frame assy' is very light so that this can be used in a various application and it's quite easy to mount the frame Assy' anywhere. High efficiency and economic - No maintenance (changing the lamp) is needed as its life time is at least about 3 times more than general fluorescent lamp. - Much lower power consumption (about 60% of others) No heat Generation - This lamp does not give any damage to applied photo, film and any of product near by as the lamp does not generate heat itself.
