INSTALLATIONS AND USE .It is a 3- speed circulation pump that can be used in both open and closed systems. The pump is of the wet- rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid....
INSTALLATIONS AND USE .For pumping clean liquids without abrasive particles, which are chemically non aggressive to the pump materials .For water supply .For heating, air -conditioning, cooling and circulation plants .For civil and industrial applications .For firefighting applications .For...
INSTALLATIONS AND USE .For water supply .For clean liquids, without abrasives, which are non-aggressive to the pump materials .For domestic use, for civil and industrial applications, for garden use and irrigation PERFORMANCE RANGE .Flow rate up to 28m /h .Head up to 60m OPERATING CONDITIONS... url:http://www.waterpumpsupplie.com
INSTALLATIONS AND USE SP .For clean water containing solids up to 5mm .For discharging domestic waste water .For draining rooms or emptying tanks .Extraction of water from ponds, streams and for rainwater collection SPD .For dirty water, containing solids up to 35mm PERFORMANCE RANGE .Flow rate...
5754 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
INSTALLATIONS AND USE .For water supply system .For clean non -explosive liquids, without solids, filamentary or abrasive matter and non -aggressive to the pump materials .A universal pump for civil and industrial use, for pressure boosting systems, fire-fighting systems, high-pressure washing...
FEATURES .An agitator is provided to assist smooth suction of the pumping fluid .The side -flow, top- discharge keeps the motor cooling even the pump runs continuously .High chrome iron Semi -open impeller enables the pump to maintain its original performance OPERATING CONDITIONS .Liquid...
1. Introduction
HP-220-5-03 peristaltic pump is specialized for condensed fluid recycle, to make sure that elements can work smoothly, such as cooler and catch tray. Synchronous generators and gear wheel can prevent condensed fluid refluxing. 0.3L/h pipetting of the pump can eliminate the condensed fluid. The pump has superior creep resistance and antifatigue function.
2.Features
Preventing condensed fluid refluxing efficiently
0.3l/h pipetting
Easy to replace new pump
Containing superior Germany peristaltic pump tube
3.Specification
Rpm: 5rpm or 10rpm
Flux: 0.3NL/h
Power supply: 220VAC/50Hz 3.5W
Connecting material: PVDF
Interface form: PVDF, OD6mm ferrule
Pump tube size: D7.5mm/ID4.3mm L=125mm
Features of Infusion Pump
1. HD LCD Display, high capacity words, friendly user interface, dynamically display working status;
2. Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents;
3. Compatible with any brands of infusion sets after correct calibration;
4. Preset solution volume to greatly reduce the workload of nurses;
5. Work mode: ml/h and drop/min can switch freely;
6. Three levels of occlusion: high, middle and low;
7. Purge function;
8. KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 1-5ml/h(1ml/h step);
9. Power Source: AC100---240V, 50/60Hz; Internal Battery;
10. Automatically record the settings of last infusion;
11. BYS-820D can store 2000pcs of infusion records and it has a drug library.
12.OEM is available.
Specification of Infusion Pump
Rate
1ml/h ~ 1,200ml/h
Flow Rate Accuracy
Within ±5% (after correct calibration)
Mechanical precision
Within ±2%
Purge Rate
100ml/h ~ 1,000ml/h (100 ml/h step)
Infusion Volume
1ml ~ 9999ml
Total Infusion Volume
0.1ml ~ 9999.9ml
KVO rate
1ml/h ~ 5 ml/h (1ml/h step)
Occlusion
High: 800mmHg ±200mmHg (106.7kPa±26.7kPa
Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa
Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa )
Unique audible and visible alarm
Human voice alarm for End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc.
Power Source
AC 100V ~ 240V, 50/60Hz; Internal rechargeable Li battery, capacity�?�1,600mAh, 4 hours internal battery backup
Bubble detector
Ultrasonic wave detector; detection sensitivity �?�25μL
Fuse
F1AL/250V, 2 pc inside
Power Consumption
18VA
Operating Condition
Ambient temperature: +5�?? ~ +40�??;
Relative humidity: 20 ~ 90%
Atmospheric pressure: 86.0kpa ~ 106.0kpa
Transport & Storage Condition
Ambient temperature:-30�?? ~ +55�??
Relative humidity: �?�95%
Equipment Classification
Class II, internal power supply, Type CF
IP Classification
IPX4
Dimension
140mm (L) �?157mm(W) �?220mm(H)
Weight
1.8kg (net weight)
penny at csbeyond.com
-
Product Description:
CMEP-OL oil less explosion proof refrigerant recovery machine is specially designed for light hydorcarbon refrigerants,such as R600,R600A and R290,etc.It's suitable for the service of household A/C,fridge and oil extraction.
Unique Advantages:
1.Specially designed for ligh hydrocarbon(HC Refrigerants)
2.Food grade material and PTFE seal
3.explosion and leak proof design with UL listed explosion proof motor
4.1HP oil less dual cylinder high efficiency compresor for 24 hours running
5.high pressure protection for safety with deep ultimate vacuum
6.Vapor recovery rate:less than 71.6Kg/h(2.63lbs/min)
7.All of the fitting is designed according to UL explosion proof standard
8.Voltage: 115V 60Hz
9.Weight:43Kg
Company Information:
CM refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc) are widely used in the field of HVAC/R. CM is a comprehensive hi-tech. Enterprise specialized in R&D, manufacture, sales of products for HVAC/R industry.
CM factory, Nanjing Wonfulay Precision Machinery Company Ltd, is located in Nanjing, China. Ever since its establishment in 1990s,CM dedicates itself to R&D and manufacturer of refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc). With its unremitting efforts and more than 20 years of experience, their refrigerant recovery systems have got several national and international patents and their machines have earned good reputation among the customers.
Refrigerant recovery machine of CM are sold all over the world in 46 countries. CM recovery systems have got ISO and CE certificate and all the machines are made according to the ARI 740 standard. CM has established long term and harmonious cooperation relationships with YORK, MIDEA ,CARRIER, MCQUAY, etc. CM is your trustworthy partner.
Our aim is to become you environmental service helper and your financial manager who will supply you commercial, residential and customized refrigerant recovery equipments (recovery/recharge/reclaim/vacuum/etc) worldwide.
Salient Features
Submerged in water permantatly so no need of separate cabin
Compact design suitable for minimum water level
It also works on low voltage
Noiseless and vibration free operation
Installation without foot valve
Easy installation and servicing
MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
SHAFT : Stainless Steel 420 H&T
TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate
SEAL : Nitrile Rubber Oil Seal
IMPELLER / ROTOR : Dynamically balanced
WINDDING WIRE: Poly wrape Double coated copper wire
Salient Features
Submerge in water permanently, so no need of separate cabin
Priming is not require
It also works on Low Voltage
Noiseless and Vibration free operation
Supplied with foot valve
MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal
BUSH BEARING : GM LTB 4
SEAL : Nitrile Rubber Oil Seal
ROTOR SHAFT : Stainless Steel 420 H&T
IMPELLER : Dynamically balanced
WINDDING WIRE : Poly Wrap Double coated copper wire
HP 0.5 HP to 2.0 HP
HEAD 7.5 Mtrs to 32.5 Mtrs
CAPACITY :40 LPM to 480 LPM
VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 11 Nos.
HP 1.0 HP to 30 HP
HEAD 5 Mtrs to 75 Mtrs
CAPACITY 40 LPM to 5200 LPM
VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 166 Nos.
Salient Features
Squirrel Cage Induction type totally enclosed Motor (TEFC).
Single Phase with running Capacitor
It also works on Low Voltage
Easy installation and easy Servicing
MOTOR BODY : Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt
ROTOR SHAFT : Stainless Steel 420 H&T
IMPELLER : Graded Cast Iron and Dynamically Balanced
BALL BEARING : Reputed Make ZZ Ball Bearing
SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal
WINDING : Super enameled EC Grade Copper Wire
HP 0.5 HP to 2.0 HP
HEAD 6 Mtrs to 28 Mtrs
CAPACITY 25: 550 LPM
VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 24 Nos.
HP 0.5 HP to 25 HP
HEAD 6 Mtrs to 86 Mtrs
CAPACITY 25: 2100 LPM
VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 53 Nos.
Salient Features
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 20.0 HP to 120 HP
THREE PHASE 300- 415V
HEAD 10 Mtrs to 150 Mtrs
CAPACITY 1000 LPM to 4000 LPM
VOLTAGE - AC 300- 415 V, 50 Hz, 2900 RPM
NUMBER OF MODEL More than 800 nos.
Salient Features
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING: G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 10.0 HP to 80 HP
THREE PHASE 300- 415V
HEAD 15 Mtrs to 280 Mtrs
CAPACITY 300 LPM to 2400 LPM
VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL More than 800 nos.
Salient Features :
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
MOTOR BODY : Stainless Steel with 1% Nicke
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hou
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plat
BUSH BEARING : GM LTB
ROTOR SHAFT : Stainless Steel 420 H&
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wi
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamically balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 2.0 HP to 30 HP
THREE PHASE 300- 415V
HEAD 4 Mtrs to 228 Mtrs
CAPACITY 350 LPM to 2150 LPM
VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBERS OF MODEL More than 800 Nos.
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting
SINGLE PHASE : 180- 240V
THREE PHASE : 300- 415V
HEAD 4 Mtrs to 465 Mtrs
CAPACITY : 45 LPM to 1200 LPM
VOLTAGE : AC 180- 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL : More than 800 nos.
ISI MODEL : More than 300 nos.
Salient Features :
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
Motor Body : Stainless Steel With 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting
HP 2.0 HP to 30 HP
SINGLE PHASE : 180- 240V
THREE PHASE : 300- 415V
HEAD : 4 Mtrs to 465 Mtrs
CAPACITY : 45 LPM to 1200 LPM
VOLTAGE : AC 180- 240 V (Single Phase), 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL : More than 800 nos.
ISI MODEL : More than 300 nos.
Multi Stage Centrifugal Pump With Radial / Mix flow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
It Also Works On Low Voltage
Easy Installation And Easy Servicing
Good Quality Components And Parts Require, less Maintenance
Motor :
Motor Body : Stainless Steel with 1% Nickel
Stamping : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing : GM LTB-4
Rotor Shaft : Stainless Steel 420 H&T
Seal : Nitrile Rubber Oil Seal
Winding Wire : Poly Wrap Double Coated Copper Wire
Pump :
SUCTION / NRV : Graded [G20] Cast Iron
Bowl / Impeller : Noryl-glass Field With Stainless Steel Neckring
Pump Sleeve : Stainless Steel 410 with Hard Chrome
HP : 0.5 HP to 1.5 HP 1Ø
HEAD : 9 Mtrs to 120 Mtrs
CAPACITY : 10 LPM to 95 LPM
VOLTAGE : AC 180 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 25 Nos.
After Sales Service Available: Yes
Application: Hydraulic Pump
Condition: New
Types: A8V107 Hydaulic Pumps for Sumitomo LS2800 Hydraulic Excavator
Quick Details
Fits with Machine Model: Sumitomo LS2800 Excavator
Place of Origin: India, South Korea, Australia
Packaging & Delivery
Packaging Details: Standard Package
Delivery Time: Negotiation
Specifications
Choose Sumitomo LS2800 hydraulic excavator hydraulic pumps. The pump will deliver exceptional functionality, durability and YantraLive's extensive line of hydraulic pumps delivers the best machine performance. Buy Hydraulic Pump for Sumitomo LS2800 Excavator at Best Price.
For the variegated demands of our prestigious buyers, we are highly engrossed in providing a wide range of Hydraulic Pumps for Excavators. Our offered Hydraulic Pump is precisely manufactured using the best grade raw material and modern technology. The provided Hydraulic Pump is highly appreciated among our buyers owing to its optimum strength and simple installation features.
This Hydraulic Pumps can be availed in as per the requirements of our buyers. Furthermore, to avoid any flaws, the offered Hydraulic Pump is tested by our quality experts against various quality parameters.
5754 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
