CAS 52255-49-9
Appearance: colorless to light yellow, transparent to viscous liquid.
Solubility: soluble in water, insoluble in toluene, isopropanol and ethanol.
Properties and main functions:
1. Capatible with alkylaryl suphates and other sulfonated, sulfated, anionic and non-ionic surfactants.
2. Buffering pH to reduce the stimulation to skin, acting efficiently in a pH zone greater than 7.
3. Reducing the consumption of water and energy during processing in slurry preparation of low viscosity and high solids content, improving the efficiency of the detergent spray dry plant by reducing caking and blockages.
4. Improving shape, glossiness & hardness of sprayed particles, reducing the quantity of fine powder.
5. Scattering dirt and preventing re-deposition, inhibiting the growth of CaCO3 in the washing liquid.
6. Stable to the changes of temperature, no precipitant.
Identification
Synonyms p-Formaldehyde; Polyoxymethylene
Molecular Formula (CH2O)n
Molecular Weight 90.08
CAS Number 30525-89-4
Properties
Melting Point 120-170C
Density 0.88
Flash Point 71C
Water Solubility sparingly soluble
Specification
Item Specification
Formaldehyde Content 96.0% ±1% 97.0%±1%
Acidity(Formicacid) 0.03% max
Methanol Content 1.0 % max
Ph 5-9
Iron Content 0.0002% max
Ash 0.05% max
Application
As ideal substitute of industrial formaldehyde. It can be used in the manufacture of glyphosate, acetochlor, machette, tricyclazole as well as high-grade automobile paint, phenol-formaldehyde resin, melamine resins and ion exchange resin etc.
99.6%Content Paraformaldehyde(POM CAS No 30525-89-4) from China Supplier
Specification:
Item Standard Test result
Appearance
Content 96% +1 96.38
Acid value (formic acid) 0.03% 0.03%
Ash 0.03% 0.03%
Fe content Less than 0.0003% (wt.)i.e.3ppm <0.0003%
PH value (20C) 3.5-6.0 5.6
Application;
Appearance: white granular powder
Properties and functions:
1. SMA is strongly alkaline, having strong capacity of cleaning, buffering and softening, counteracting acidic contamination, emulsifying fat and oil, deflocculating to inorganic.
2. It can replace STPP to be used for the manufacture of effective detergents and rust remover for metal, reducing environmental pollution, preventing corrosion for metal (zinc, aluminum, etc.).
Sodium sulfate, inorganic compounds, sodium sulfate decahydrate, also known as glauberite, high purity, fine particles of anhydrous matter called sodium powder. A white, odorless, bitter crystal or powder with hygroscopic properties. The shape is colorless, transparent, large crystals or small granular crystals. Mainly used in the production of water glass, glass, porcelain glaze, pulp, refrigerant mixture, detergent, desiccant, dye diluent, analytical chemical reagents, medicine and so on
26631 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Sodium Salt of 123Benzotriazole BTANa
CAS No 15217422
Molecular formula C6H4N3Na
Molecular Weight 14111
Properties
BTANa can be absorbed on metal surface and form a thin film to protect copper and other metals BTANa can be used together with many scale inhibitors and fungi disinfectants in circulating cool water system and it has good corrosion inhibition effect in circulating cool water system The dosage of 24mgl is preferred BTANa can also be used as antidiscolor agent coating additive and luboil additive
Specification
Items Index Appearance
Pale yellow to yellow transparent liquid
Active contentwt 500min
Density 20 gcm3 120 min
Package and Storage 200L plastic drumIBC1000Lcustomers requirement Storage for six months in shady room and dry place
Synonyms BTANa sodium salt of 123Benzotrialole12Aminoazophenylene123Triazaindene
* Used to prepare elemental boron and fine boron compounds, to manufacture boron glass, optical glass, heat-resistant glass and glass fiber, etc. It is also used as a flame retardant and desiccant for paints, as a catalyst for organic synthesis, and as an additive for high-temperature lubricants. and chemical reagents, etc.
* Physical and Chemical Properties:Aluminium sulfate is a salt with the formula Alz(SO4)3. lt is soluble in water
Application:
* Used as a paper sizing agent in the paper industry to enhance the waterresistance and impermeability of paper,
* After being dissolved in water, the fine particles and natural colloidal particles inthe water can be coagulated into large flocs, which can be removed from the waterso it is used as a coagulant for water supply and wastewater.
* Soluble in acid and ammonium chloride, insoluble in water and ketone.
Application
* It is mainly used to manufacture special alloy precision optical glass, high refractive optical fiber board, suitable for making
cameras, microscope lenses and advanced optical instrument prisms, etc. *
* It is also used to manufacture ceramic capacitors,
piezoelectric ceramic dopants and X-ray luminescent materials such as lanthanum bromide oxide powder. It is used as a catalyst for
various reactions. Lanthanum oxide impregnated with lithium oxide or zirconium oxide (1%) can be used to manufacture ferrite
magnets, fiber optical devices and optical glass.
* CLOPIDOL pyridine is a compound of pyridine, which has a wide range of anticoccidal action.It can be used for bird and rabbit coccidiosis.
CLOPIDOL plays a major role in the stage of spore development, which can stop the development of spores in the epithelial cells for up to 60 days. It was also recently found that there was an inhibitory effect on the reproduction of the second generation, gamete reproduction and spore formation. Since chloropyridine is only inhibitory to the globule, the spore is able to grow again after withdrawal.
CLOPIDOL can reduce the host's immunity to the worm.
Sodium iron (NaFeEDTA), ethylenediamine tetraacetate, is a chelating iron nutrient fortifier.
Product name Magnesium sulfate heptahydrate
CAS 10034-99-8
Melting point 1124C
density 2.66
vapor density <0.01 (vs air)
vapor pressure <0.1 mm Hg ( 20 C)
Salicylhydroxamic acid is a kind of high efficient chelating collector for rare metal oxidized minerals. It has the advantages of good selectivity and strong collecting power when used in mineral processing of rare metals. Salicylhydroxamic acid is mainly used as collector or extractant of rare earth ore, copper oxide, lead-zinc oxide ore, gold ore, kaolin and organic synthesis intermediates.
Oxalic acid is an organic substance, chemical form HCO It is a metabolite of living organisms. It is a moderately strong acid. It is widely distributed in plants, animals, and fungi, and performs different functions in different living organisms. Studies have found that more than 100 kinds of plants are rich in oxalic acid, especially spinach, amaranth, beet, purslane, taro, sweet potato and rhubarb and other plants have the highest content. Because oxalic acid can reduce the bioavailability of mineral elements, it is easy to form calcium oxalate with calcium ions in the human body and lead to kidney stones, so oxalic acid is often considered as an antagonist for the absorption and utilization of mineral elements. Its anhydride is carbon sesquioxide.
Hydroxypropyl Methyl Celluloseare types of non-ionic cellulose ether, which are a powder of white to off white color, thatfunction as a thickener, binder, film-former, surfactant, protective colloid, lubricant, emulsifier and suspension and waterretention aid. In addition, there types of cellulose ethers exhibit properties of thermal gelation, metabolic inertness, enzy meresistance, low odor and taste, and PH stability.
Due to the myriad of properties, HPMC is often used to substitute many other additives with lower concentration, making HPMC anincredibly efficient and effective additive in area of adhesives, construction, foods, household products, pharmaceuticals and etc.
* PM Proprylene Glycol Monomethyl Ether is a colorless and transparent liquid with low toxicity and good solubility. It is widelyused as solvents and additives in coatings, printing inks, dyes, pesticides, cosmetics and other industries. PM Proprylene GlycolMonomethyl Ether has excellent dissolving ability and can effectively dissolve various resins, pigments and additives, making theproducts made with good uniformity and stability. In addition, the evaporation rate of PGME is moderate, which can make thecoating or ink layer form good leveling and gloss during the drying process.
1.As a solvent; dispersant or diluent, it is used in industries such as coatings, inks, printing and dyeing, pesticides, celluloseand acrylates.
2. It can also be used as fuel antifreeze, cleaning agent, extraction agent and non-ferrous metal beneficiation agent. It can also be used as raw material for organic synthesis.
3.Mainly used as an excellent solvent for nitrocellulose, alkyd resin and maleic anhydride-modified phenolic resin, as an additive for jet fuel antifreeze and brake fluid, etc.; mainly used as a solvent, dispersant and diluent, and also used Used as fuel antifreeze, extraction agent, etc.
AOS 92% is white viscous powder,it is a kind of anionic surfactant with excellent detergency, emulsification,osmosis,dispersing,decontamination and foamability performances,offer rich and delicate bubbles,can be easy to dissolve in water,has a good performance compatibility with anion and non-ionic,fast biodegradation,has good resistance to hard water.
26631 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
