Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
Tielo New Construction Tile Adhesive meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles). Easy application:- single component, ready to use mixture consisting of white cement, crystel and special additives. excellent adhesion and slip resistance.
Tielo Universal Gold Tile Adhesive is a cementations material in powder form composed of cement, chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface or on existing mosaic tiles without removing them, Tielo Universal Gold Tile Adhesive is also used for fixing tiles on difficult surface also.
Tielo Universal Tile Adhesive is a cementations material in powder form composed of cement, bonding chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface. Tielo Universal Tile Adhesive is mainly used for fixing glazed, ceramic, terracotta tiles & vitreous tiles etc
Laminates of fabrics, and fabrics with other substrates, are a recent development in the long history of fibers, textiles and fabrics. Woven cloth has been known since antiquity; fabric laminations have become widely used only in the past forty yearswith the development of synthetic fibers and the adhesives needed to provide functional bonding. End uses range from the purely decorative, as in a variety of fashion applications, to the highly functional as, for example, in the fabric/film composite increasingly used for industrial, agricultural and marine coverings. The range of substrates and the diversification of end uses grows constantly. Because of this diversity, an appreciation of the substrates, the adhesives available, and the processes used to combine them becomes of increasing importance for converters intent on obtaining optimum properties through lamination. We at RITU DYE CHEM have invested lot of years in gaining expertise in adhesives for all types substrates with rise in technology.
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
1. 365nm UVA tube attract mosquitoes and flies, strong glue board stick and kill insects with high-efficiency. 2. Without high voltage, noise and electric spark, and safe for humans and pets. 3. Power supply: 100-110V / 220-240V AC cable. 4. Light source: 365nm UVA 12W U Type tube. 5. Working range: 100 square meters 6. With glue board storage, easy to replace glue board storage. 7. Included 10pcs sticky and anti-aging glue board, it is durable using. 8. 2 use method: hang on the wall or put it on the table.
BOPP adhesive tape Thickness: 41micron Width*Length: 0.48*100m
Paver lacquer is applied on the surface of pavers to impart a decorative finish and colourful look. This is a high gloss, best quality lacquer coating which provides more coverage area and gives more shine to the surface of pavers. It can be applied on cement concrete block, paver block, decorative tiles and like items. Easy To Use : Forms a hard transparent film over the surface applied. Provides high glossy finish with shine and scratch resistance. Excellent water , dust, alkali and abrasion resistance. Has strong bonding property. Exceptionally high coverage area. Available in packing of 20, 50 ,200 ltrs.
we are one of the company producing the wallpaper paste(KOREAPUL). We are exporting our product KOREA PUL to southeast Asia, Canada, and Uzbekistan, and the product' quality is receiving much recognition. Execellent antibacterial properties evaluated by trusted party. Certification of Environmental Building Material NO. HB1300E12-01. National Housing Corporation Papering Glue Test Code- KSF3217 . Made of natural potato starch. Granulated, easily dispersed in water and convenient in storage and delivery. Transparent, clean looking applied glue can be achieved. Chemically stable and wrinkle doesn't occur. I'll be waiting for your reply.
1.Product Name:Glue Stick for Electronic Heat Resistance2.Product Description(1)COMPOSITION:POLYAMIDE RESIN 89%Phosphate Triester 9%Paraffin 2%(2)HS CODE:3506919090(3)Solid Content:100%(4)R&B SOFTENING:150±5(5)OPENING TIME:10~13S(6)Curing Time:8S~10S(7)Brookfield VISCOSITY 150 ...............................9500 CPS160 ...............................8500CPS180 ............................. 6500CPS(8) Certification:SGS Environmental Protection Report ROHS AuthenticationMSDS Safety Report(9 )Initial Adhesion TEST: Steel Ball(10)Packing and shipping:0.5kg/bag20kg/ctnThe package can be customized as your requirement.(11) Usage:Electronic ProductFilter ProductgarmentApplianceAutomotive and Machinery,,Etc.(12)Characteristic:require clean, fresh air, need to exchange gas with outside air, and require air filtration devices, usually Connected to the air conditioning system. The production and assembly of these filter devices require the bonding of hot melt adhesives and the sealing of the goods.(13)Warehouse
1.Product Name:Hot Melt Glue Stick2.Product Description:(1) Usage ElectronicHandcraft ToyCarton packingMetalPlasticBox, .(2)R&B SOFTENING:85 ±5(3)SOLID CONTENT:100%(4)CURING TIME:5~8S(5)OPENING TIME:10~13S(6)BROOKFIELD VISCOSITY:150 .13000CPS160 12500CPS180 ......................................12000CPS(7)Character:high viscosityNon wire drawingCold-resistanceNo loss of viscosity, etc.(8)Certification:SGS Environmental Protection ReportROHS AuthenticationMSDS Safety Report(9) NON-TOXICITYÂ Â (10)Recommended Application Temperature:150-160(11)HS CODE:3506919090(12)OEM:accepted(13)Valid time:1 year(14)Storage:indoor(clean and dry)(15)Packing and shipping:1kg/ctn 2kg/ctn 20kg/ctn 25kg/ctn,The package can be customized as your requirement.Delivery:common specification5days(16)Answers to your doubts(17)About usWe take our customers to visit factory and win customers praise.
1.Product Name:glue stick for perfect binding2.Product Description(2)Solid Content:100%(3)R&B Softening:88±5(4)Opening Time:10~15S(5)Curing TIME:8~10S(6)Brookfield Viscosity:150
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Property: Fire-retardant mastic is made from asphalt,polymer,mineral fillers and flame retardant, it is air-tight,waterproof,aging resistant and fire retardant.an ideal foam protection for foam glass and PU foam. Application. Packing: In 30kg each barrel..
The New White Mastic Description "The new White Mastic is a white thick syrupy substance.Its main components are epoxy resin, organic solvent, plasticizers, flame retardants, film forming agent and fillers. It is mainly used as damp barrier for coldinsulation layer and roof buildings. It has all the advantages of asphalt based mastic ,besides it has better formability and wider working temperature range." Material Preparation "DO NOT THIN. Do not use sticks or boards,which would splinter or otherwise contaminate the product.Apply only to clean, dry, oil-free surfaces.Keep container closed when not in use. The new White Mastic cannot apply by spray." Application Outdoor and Heavy Duty Service-Apply a tack coat of The new White Mastic at a thickness of 1.6mm. Smooth membrane to avoid wrinkles and overlap all seams at least 5cm.Apply a finish coat of The new White Mastic at a minimum thickness of 3.2mm.This finish coat shall apply no later than 1 hour after the tack coat and shall completely cover membrane.This application shall zpro vide a mi nimum dry film thickness of 3.0mm. Specification and package 50 kg or 100kg /barrel Storage Store and apply between 4(40) and 38 (100).
