X6.11S glass (crystal) mosaic beveling machine with dual dovetail national patent original beam before the elevator, equipped with high-precision grinding ABB motor, the unique design of the front and rear plates, so that machine superior performance, both can be processed into a little 15mmX15mm of glass mosaic and glass wide variety of more than 15mm long (to create new industry standards), the processing speed is more than 5 meters per minute, regardless of efficiency or yield have led the industry. Can be processed more than 40mm wide bevel, and five, seven, nine multi-stage bevel is KTV glass decoration, fight mirror, home decoration, furniture, sanitary ware the best choice, worthy of the name-- the real King of glass beveling machinery.
Pneumatic clamping of the glass sheet during the drilling operation of Opposite drilling head.BZ0213 glass drilling machine is equipped with a glass supporting table.
Major Technical Specification
Drilling Hole Diameter 4-130(mm) Glass Thickness 2-20(mm)
Space Between Drilled Hole Center And Vertical Post 1050(mm) Total Power 1.7(kw)/2.2(kw)
Dimension 1.65x2.6(M) Weight 900(kg)
BQ2500 Glass horizontal washing & drying machine is working for various flat glass and specially working for LOW-E glass. The structure of machine is made of painted steel; All parts in contact with water are waterproof materials made. The machine equipped with 4 pair of brushes and air-knife so that generate a perfect washing and drying, All driven-rolls are steel made, suitably coated with vulcanized and rectified rubber, soundproof blower, is placed on the top of drying section, to ensure a strong force air for drying. The washing section is well controlled by PLC, and it is able to be completed lift up or low-down for the purpose of different thickness of glass.
W26 horizontal washing machine is an particular design for Low-E glass and other coated glass, it is also can perfectly perform washing and drying for all kind of flat glass.
Min. Size 300*350mm
Max.Size (Width) 2600mm
Glass Thickness 3-60mm
Processing Speed 1.2-6m/min
Intalled Power 39KW
No. of Burshes 4pairs
Dimension 8500*4500*3500mm
Weight 4500kg
1.1. This glass edger and variable miter machine is able to grind and polish the miter angles of the glass, with bottom edge polishing and rear seaming all at the same time.
1.2. The control system of this glass miter machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor adopt timing belt which can improve the transmission precision.
1.4. The processed glass surface is very bright and smooth, approaching the original glass surface.
1.5. The mitering angle of the glass machine ranges from 0 to 60 degree.
1.1 This glass mitering edging machine is able to process and polish all miter edge, bottom edge and arris on glass at one time. There are 3 wheels for each arris.
1.2. The control system of the glass mitering edging machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor of the machine adopt timing belt which can improve the transmission precision.
1.4. The mitering angle ranges from 0 to 60 degree.
Technical data of water jet cutting machine
The machine has three parts: cutting table, intensifier pump, controller
1) We have two kinds of cutting table: bridge style and flying arms style, their technical data is as follows:
Z-axis journey is 150mm
Three-axis control, Auto zero positioning
Way of drive : Servo ( drives and motors are FUJI brand from Japan )
All screw and linear guide are ABBA brand from Taiwan
Control accuracy: í+0.01mm
Cutting accuracy: í+0.2mm
2) The intensifier pump we introduce you to use is made in China, its technical data and components are as follows:
Type of pressurization is hydraulic. (The water is pressurized by using the fluid pressure intensification principle)
Max. oil discharge is 90 L/min
Max. water discharge is 3.7L/min
Max. diameter of orifice is 0.3mm
Max. operating pressure is 380MPa
Continuous operating pressure is 330MPa
Power requirement : 37KW,380V/50HZ
Type of shift is electronic
maintenance free accumulator whose capability is 1.3L using American technology
intensifier is from America
3) For the controller,we research and develop our own professional software, components are as follows:
EVOC brand Industrial Personal Computer and 17BENQ LCD
specialised waterjet cutting software
Omron brand PLC instead of relay
Windows XP based.
Compact, robust
Safe, ex-proof
Power source:compressed air
Max.Output pressure:100mpa
Medium:oil, water, corrosive liquids
Hydraulic power packs include lbs130wl model are complete hydraulic units ready for connection which are provided for generating operating pressures up to 100mpa.It is suitable for powering a variety of medium, such as oil, water or corrosive liquids.
As the pressure will be generated by means of a pneumatically operated pump.The electric connection will not be necessary.
To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water seperator, pressure-regulating valve, pressure control gauge as well as manual relieve valve.In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner.Pressure gauges, valves and pressure regulators will be fitted on panel.
The desired operating pressure can be attained by adjusting the driving air pressure.When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value.
This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure
Air driven gas booster
Rugged, efficient
Pressure range:1.6~80mpa
Seven pressure ratios available
Best price, high quality
Air driven gas boosters are high pressure reciprocating pumps used for gases boosting, driven of compressed shop air. Sta series boosters are single acting, single air head driven type.(except model sta02 and sta05.They are double acting models).They have to be prepressurized at the inlet port so as to meet with the outlet pressure requirements, which value will be variable based on the permitted maximum outlet pressure.
Sta series gas boosters are suitable for the oil free compression of air and industrial gases like nitrogen, helium as well as flammable and risk gases like hydrogen , oxygen and natural gas.Air drive pressure from 1bar(14.5psi.) to 8bar(116psi.). Provide for operating pressures up to 80mpa.
Feature: this machine is suitable for grinding and polishing peripheral edge and bevel of different shape flat glass. It can process semi-automatic procession for circular glass. Five-star suction tray adopts vacuum clamping. Its rolling speed can be adjusted at random during working. Install and adjust easily while processing different size glass.
Technical specifications:
1. Thickness: 3 ~ 25mm
2. Bevel edge angle range: 0 ~ 20 degrees
3. Maximum width of bevel edge: 32mm
4. Maximum diameter: 2000 mm
5. Minimum diameter: 120 mm
6. Power: 3.2 kw
7. Weight: 800 kg
This machine is suitable for sandblasting the surface of glass, metal and ceramics etc and different designs and characters. It makes processed articles form stereo designs or become colorful carved craftworks with color and paint. This machine is highly efficient, easy to operate and repair.
Technical specifications:
1. Max processing depth: 3mm
2. Working pressure: 0.4 - 1mpa
3. Compressor power: 0.6 - 0.9m3/min
4. Wind machine power: 220v/50hz, 450w
Technical specifications:
1. Processing dimensions: min: 200 x 500mm max: 1500 x 2000mm
2. Processing thickness: 3 - 25mm
3. Spray gun traveling speed: 0.5 - 12 m/min
4. Sand spraying speed: 10 - 15 m2/h
5. Working pressure: 0.8mpa
6. Air compressor power: >12kw (>1.5m3/min)
7. Total power: 3.6kw
8. Size: 6100(l) x 2000(w) x 2500(h) mm
Hxm series glass straight-line beveling machine which processed with three diamond wheels for coarse grinding, one wheel for base modification, three wheels for refine grinding and two wheels for pneumatic polishing. The grinding speed is regulated by a stepless regulator.
It specialty adopt beveling wheel which can whole progress and also can lifting integrally. It compare to traditional front beam or back beam's lifting, it more pithiness structure, more stability, higher grinding precision.
Hxm261pt/hxm9320t straight-line beveling machine has adjustable front beam, can process glass size from 50-3000mm.
Hxm261p/hxm9320b straight-line beveling machine is designed for beveling glass size from 150-3000mm.
Hxm261pt & hxm261pt adopt plc control system and displays the thickness and length of processed glass by lcd screen.
Hxm9320t & hxm9320b are for manual operation.
Technical specifications:
Hxm261pt
1. The number of grinders: 9
2. Grinding speed: 500 - 2500mm/min
3. Maximum beveling width: 35mm
4. Range of bevel angle: 3 - 20 degrees
5. Glass thickness: 4 - 20mm
6. Size of processed glass: max: 3000 x 3000mm min: 50 x 50mm
7. Power: 18.5kw
8. Weight: 4800 kg
9. Size: 7760 x 1400 x 2450mm
Hxm9320t
1. The number of grinders: 9
2. Grinding speed: 500 - 2500mm/min
3. Maximum beveling width: 35mm
4. Range of bevel angle: 3 - 20 degrees
5. Glass thickness: 4 - 20mm
6. Size of processed glass: max: 3000 x 3000mm min: 50 x 50mm
7. Power: 17.8kw
8. Weight: 4800 kg
9. Size: 7760 x 1400 x 2450mm
This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency.
Technical specifications:
Hym6320
1. The number of grinders: 6
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 16kw
6. Weight: 2600 kg
7. Size: 6400 x 1200 x 2500mm
Hym4320
1. The number of grinders: 4
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 11.3 kw
6. Weight: 2300 kg
7. Size: 5900 x 1200 x 2500mm
Glass-lined and stainless steel reactor with the capacity 50-30000l. Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180. Resistance to impact: 220-10-3j. Thermal shock resistance: resistance to sudden cooling 110, resistance to sudden heating 120. Insulation performance: the enamel surface should be strictly tested at 20kv.
Functions characteristics:
Low-e insulating glass production line
Automatic control function for low-e glass
It is transmitted by a wheel, steadily and reliably
Automatic adjust function for pressing with hydraulic compression
Tilting table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1monitor .
Technique parameter:
Max .Glass size 1800*2500mm
Min .Glass size 300*500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15600*2350*3000mm
Power rate 20kw .
