different types of silicon steel / electrical steel / CRGO / CRNGO Magnetic tape wound cores for transformer sensor etc. Material Property: CRGO&CRNGO Material Brand: Baosteel, NSC, JFE, TKS, POSCO, NLMK Material Thickness: 0.05mm, 0.08mm, 0.1mm, 0.23mm, 0.27mm, 0.3mm, and 0.35mm. Certificate: RoHS 2011/65/EU Technics: tape winding Products Frequency: 50-5K HZ Products Shapes: C E O & Customized Mechanical Properties: low power loss per cycle / low core loss / high permeability Application: transformer, sensor and magnetic components of electronic equipment; Automobile Sensor, Solar Inverter, Smart Home CRGO Tape wound Cores wind one long continuous silicon steel tape tightly into a spiral advantage: no air gap, high magnetic properties, easy to roll weakness: difficult to wind large cores and realize mechanized Welding ï¼?Spot welding is firm and smooth, and does not weld through two layers Winding ï¼?winding is tight, the start and end of the sheet can not be turned up Planeness ï¼?surface unevenness is less than 0.1mm Fineness ï¼?No crystalline fine particles (no crystalline fine particles on the cut surface) Cut face ï¼?No obvious crack on the cutting face (no light transmission and peeling between layers) Surface ï¼?Visually without burrs, rust, or deformation (to control deformation within tolerances) Products ï¼?Do not contain Pb\Cd\Hg\Cr\PBBs\PBDEs
C core is made of Hi-B oriented silicon steel strip. C core is assemabled by 2 U shape cores, and there is gap between two U shape cores. C core is also called cut core, because it looks like a rounded rectangle cutted at the center. Air gap is not always bad for transformers. Sometimes it does good. C core is good at making choke and audio output transformer, because of it's adjustable air gap. Certain air gap can reduce the flux saturation. Easily assembled Prepare 2 coils and insert the core. That is simple. There is no need to insert EI laminations one by one like EI transformer. Air gap adjustable The air gap in C core can be adjusted as you wish to make different applications.It is suitable to make choke and audio output transformer.
Functional characteristics 1. The whole box body is divided into four parts: the bottom floor, the frame, the top frame and the box cover. The frame and the top frame are assembled by steel structural parts. The outer shell can be made of coloured steel plate which conforms to the heat insulation plate or steel plate. The clapboard is made of coloured steel composite plate to prevent thermal radiation and thermal guidance between different types. The exposed structural parts are treated by strict acid washing, phosphating, spraying and other processes to ensure corrosion resistance, moisture and heat resistance, mildew resistance and strong outdoor weather resistance. 2. The sub-box structure is adopted to avoid oil pollution in transformer tank. 3. Adopt new louver structure, large area of heat dissipation and ventilation, suitable for areas with strong wind. V-shaped structure design can effectively prevent rainwater from entering while enhancing ventilation. 4. Low-voltage main switch adopts circuit breakers from well-known manufacturers at home and abroad. 5. The transformer uses S11-M series fully sealed oil-immersed power transformer, which has the advantages of low loss, low noise and high efficiency. It can achieve good energy-saving effect and reduce pollution. 6. Substation has perfect protection performance, convenient operation, high and low voltage metering is optional, and can be equipped with automatic reactive power compensation device according to user's requirements.
aiia transformer develops and produces various types of transformers for switch mode applications. MAIN SECTORS: LIGHTING, METERING, MEDICAL, VENDING, AUDIO, WHITE GOODS MAIN PROPERTIES: Frequency: 20-500 kHz, Max power: 1W< 450W, Max Operating ambient temperature: 40 / 70°C, Input / Output Isolation: 4kV. aiia is specialized in the most common sizes on the market to satisfy our customers needs.
Looking for PCB Mounted Power Transformer with customized values to your application? aiia Transformer, as an experienced transformer manufacturer, offers Encapsulated 50/60Hz low-frequency low voltage with different types applied to home appliances. All transformers are auto winded by machine in premium quality in our own factory, potted by UL certified resin and 100% tested before packing and delivery. Explore & find the right parameter for your needs.
Capacity.............................................................................500VA Frequency..........................................................................50/60Hz Voltage Combination.........................................Pls.see selection form. Winding Material...............................................................100% Copper Terminal Block Connection..............................................Provided Metallic Bracket Mounting................................................Provided Standards.........................................VDE0550,IEC204-1,IEC61588,EC439 Sample Service..................................................................Pay to Provide Quality Assurance.............................................................24 months Item Condition....................................................................Brand-New
1. Ambient air temperature: -5oC~+40oC, the highest monthly mean temperature should not exceed +30oC; 2. Altitude for installing place should not exceed 1000m; 3. When the ambient air temperature is +40, the relative humidity should not exceed 50%, and it allows higher relative humidity under lower temperatures. Max's average humidity in the dampest month is 90%, meanwhile, the lowest average temperature of this month is +25oC, and condensation on the product surface caused by temperature change should be taken into consideration.
This is an economical transformer that is great for HVAC, alarm and signals, motor control circuits and lighting applications. The Spartan is a control transformer that is open style with molded terminal blocks from 50 to 3000VA.
Primary voltage 220V 380VAC Secondary voltage: 380V, 220V, 110V, 36V, 24V, 12V, 6V (TO BE CHOSEN)
Primary voltage 220V 380VAC Secondary voltage: 380V, 220V, 110V, 36V, 24V, 12V, 6V (TO BE CHOSEN)
Our company mainly serves thermal power plants, hydroelectric power plants, metal mines, coal mines, steel plants, cement plants, petroleum, chemical, natural gas industry. All along, our company serves for many domestic large-scale construction projects to provide a lot of supporting services with first-class quality product, preferential and thoughtful service. We have set a good image and credibility to our customers. We hope to cooperate with domestic and foreign partners in the related areas. Power Transformer DFFG-10KVA Probe CWY-DO-815001 Temperature Gauge WSS-471 transformer WBV342S1 MAGNETIC SPEED SENSOR SMCB-01-16 Cables TM0181-A40-B01 I/O board ISO-P32C32 LVDT Position Sensor TD-1-1000 Integrated communication terminal ICTes03 Armoured Wear Resistant Thermocouple WRNK2-430NM/DN50/L=1150*1000*650 FTV Lens Tube SXJZ-70B TSI Rotation Speed Card DF2018 switch dh slip detecting unit DH-II Power Transformer DFFG-10KVA TEMPERATURE ELEMENT WZPK2-533 LVDT Position Sensor TD-1-250 Differential Pressure Transmitter DE1399YYB90ED0513 Double thermal resistance WZPM2-001, Pt100, L=50 Pressure Switch 12NN-K45-N1-B1A TSI Preamplifier CON021/916-100 Pressure Switch RC778NZ097Z steam turbine bolt heater ZJ-20-T9 THC card LTA202A Pressure Switch ST307-150-B Sensor 5000TDG-15-01-01 0-250mm Signal Acquisition module GES3000 3L4488 Probe CWY-DO-811106 Actuator Displacement Sensor DET.2A.4000A Displacement Sensor WZK.W.10.Z.021038 CONTROL BOARD 2SY5016-2SB00 Intelligent temperature monitor WK-P2T(TH) Power Transformer DFFG-10KVA ã??2020-1-19-DFJerryã??
Application: HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test. Due to increased environmental electromagnetic pollution, sensitive and accurate measurements are often affected by RF noise. The application of CNME Intermational Shielding Room provide the highest possible shielding attenuation, creating a controlled electromagnetic environment to perform high sensitive testing without distortion. If you are interested in our Faraday Cage, you can call us now.
main parameter of 69kv CT Rated current ratio: 2000/1600/1500/1200/1100/800/500/400/300 : 5 A Rated output capacity of each corresponding ratio: 200/160/150/120/110/80/45/35/25 VA Winding accuracy class: 0.2/5P20/5P20/5P20 CNMEs business activities cover national and international engineering, Generation Stations, Electrical Engineering Equipment, all kinds of electrical equipment, Test And Design and so on. The activities consist of the industries of high voltage power transmission and distribution, diesel power generation, thermal power generation, Transformer Test Laboratory Design, Electrical Lab Design And Solution, Power Plant Design and so on.
Manufacturer: HP Printer compatibility: HP Scitex TJ8550 / Scitex TJ8600 / Scitex XP2300 / Scitex XP2700 / Scitex XP2750 / Scitex XP5100 / Scitex XP5300, NUR Expedio 3200 / Expedio 5000 / Expedio Inspiration / Expedio Revolution DP part number : PLAHP13857 This F300 H.V Transformer Fusion is suitable for HP Scitex XP5300 printers. This is the original HP / HP Scitex / NUR part (number CC903-62532).
These Current Transformers are manufactured in Wound Primary type and Window type construction. It is manufactured using Automatic Pressure Gelation casting and Vacuum Casting Technique. It ranges from 3.3 kV to 33 kV.
These Current Transformers are manufactured in Wound Primary type and Window type construction. It is manufactured using Automatic Pressure Gelation casting and Vacuum Casting Technique. It ranges from 3.3 kV to 33 kV.
Place of Origin: Beijing, China (Mainland) Brand Name: HYLITON POWER Model Number: LXZ250250180060 Usage: Current Phase: Single Coil Structure: Toroidal Coil Number: Autotransformer Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Rated short-time thermal current: 40kA,1s Rated continuous thermal current: 120%In Continuous power-frequency voltage: 3kV , 1min Instrument security factor: FSâ?¤10 Application condition Ambient temperature -25-+40 Average temperature of day â?¤40 Altitude â?¤3000m Pollution class III Technical data Rated frequency 50Hz or 60Hz Rated secondary current 5A or 1A Rated short-time thermal current 40kA,1s Rated continuous thermal current 120%In Continuous power-frequency voltage 3kV , 1min Instrument security factor FSâ?¤10
Rated frequency 50Hz or 60Hz Rated secondary current 5A or 1A Rated short-time thermal current 40kA,1s Rated insulation level 12/42/75 kV Ambient temperature 25~40 Altitude Up to 1000m above sea level Indoor device Standards The product performance is in accordance with GB20840.1 GB20840.2 and IEC61869-1 IEC61869-2 standards.
Quick Details Place of Origin: Beijing, China (Mainland) Brand Name: HYLITON POWER Model Number: LDZC-10/24/35kV Usage: Current Phase: Single/Three Coil Structure: Toroidal Coil Number: Autotransformer Rated frequency: 50Hz or 60Hz Rated secondary current: 5A or 1A Rated short-time thermal current: 40kA,1s Rated continuous thermal current: 120%In Continuous power-frequency voltage: 3kV , 1min Instrument security factor: FSâ?¤10
VISION EXIM engaged in manufacturing and supply of wide range of materials / components for Power & Infrastructure industries.We have state of the art machineries, equipment and testing facilities for fabrication, shot blasting and painting to meet highest quality standards. With skilled workforce availability and in house shot blasting & flow painting facility, we offer CORRUGATED FINWALL TANK as per customer requirements for transformer rating of 50 to 2500 kVA.
