S280 3 phase ac power circuit breaker is mainly used for special occasions where two main circuits can not work at the same time. To prevent the simultaneous closing of the circuit breaker, the product can switch the line safely and quickly. It realize the switching between stand-by power supply circuits and other protection functions. Iiâ??s mainly used in the overload protection and short-circuit protection of the circuit which is DC 50Hz/60Hz, 1 pole230v, 2/3/4 poles DC1000V.
PLHT 100 amp mechanical electrical circuit breakers is nice in appearance,reasonable in structure,sound in feature and high in breaking capacity.Installed with standard din rail,it is convenient and easy in usage.It can be used as infrequent on-and-off operation and changeover. Complying with standard GB10963 and IEC/EN60898.
QA din rail Hydraulic Magnetic Mini Circuit Breaker is mainly for suitable for overload and short circuit protection. It adopt hydraulic magnetic trip instead bi-metal .So it has a high sensitivity and it is also not effected by the ambient temperature . It is especially used for illumination and distribution in industry and commerce. They are mainly used for overload and short-circuit protection within the circuit of AC 50Hz/60Hz, rated voltage of single pole or double up to 240V, three poles up to 415V. They can also be used for an infrequent switch-over of the circuit and illumination under normal conditions. They are comply with IEC 157-1973, BC4752-1977 and BS 3871 part 1
SH201L min circuit breaker mcb switch is applicable to electric circuits with rated voltage 230/400V AC, frequency 50/60Hz and rated current up to 63Amp. The product provides protection against over-load and short circuit to electric circuits and equipment in household and commercial installation. MCB is also used as non-frequent changeover of electric circuits.
S201 solar DC mcb electrical circuit breaker , apply to rating current 63A or less, It is mainly used for the overloading and short circuit protection in DC distribution system equipment and electric equipment. It can be widely used in electric, post, traffic, mining enterprise and different kinds of fields.
5SJ low voltage min circuit breaker is mainly suitable for overload and short circuit protection. It is especially used for illumination and distribution in industry and commerce. It is of pleasing out-look, light weight, reliable performance, high breaking capacity, etc. Its frame and parts adopt plastics of high inflammable resistance and shock resistance for long service life. It is mainly used for overload and short circuit protection within the circuit of AC 50/60 Hz, rated voltage of single pole up to 230V, two, three or four poles up to 400V. It can also be used for an infrequent switch-over of the circuit and illumination under normal conditions.
A6 1P circuit breaker switch belongs to the advanced level of the nineties in the world. They have protective functions as shortage and overloading,and are used in lighting distribution system in industry,commerce and dwelling,and protect fractional electric motors.And they also have many merits of high protective grade(up to IP20),high breaking capacity,good reliability of sensitive action,convenient multi-pole assorting,long using life etc.They are mainly adapted to the circuit of AC50Hz, 230V in single pole,400V in double,three on four poles for protecting overload and shortage.Meanwhile,they are also used in turning on or off the electric apparatus and lighting circuit under the normal condition.
E93 3p mcb electrical Devices is mainly used in AC50/60Hz single pole230V or two,three,four pole 400V voltage for overload and short-circuit protection as well as for infrequent on-and-off switching electric equipment and lighting circuit under normal condition the product is suitable for industry,business,building,residence,etc.It's conformity with GB10963, IEC60898 standards.
BH series overload short circuit single pole circuit breaker is characteristic of small size, light weight, novel structure and excellent performance. They are mounted in the illuminating distribution board and used in guesthouses, block of flats, high buildings squares, airports, railway stations, plants and enterprises ext, in AC circuits 240V (Single pole) up to 415V (3 pole) 50Hz, for protection of overload short circuit and for circuit change-over in lighting system. Breaking capacity is 3KA.
C65 C60 mini circuit breaker AC MCB is used in lighting distribution system or motor distribution system for protection overload and short-circuit in the system. The product is neoteric in structure, light in weight, reliable and excellent in performance. It has high breaking capacity, can trip quickly, and its case and items are adopted by high fire-resistant and shockproof plastics. The product, with long life, is mainly used in AC 50Hz/60Hz single pole 230V or two, three, four poles 400V circuit for overload and short-circuit protection as well as for infrequent on-and-off switching electric equipment and lighting circuit in normal case. The products comply with IEC 60898.
C60 DPN mcb thermal magnetic circuit breaker is applicable to protect line conductor and overload,and short circuit of small sealed motors.It is mainly for protection of circuits with AC 220V and 50Hz/60Hz,and for unfrequent conversion under normal conditions as well.Its action can be up to two poles with its only one pole volume and be used as a leakage breaker by assembling with leakage.It is produced as per EN898-87,IEC947-2 standards.
NS 250A MCCB mccb circuit breaker is one of breaker which adopts international advanced design, manufacture technology to develop. The rated insulating voltage is 750V, suit-able for AC 50Hz(60Hz),rated working voltage 690V or below, rated working current is 12.5A to1250A of circuit and used in distributing electric energy, and non-frequent breaking in the nor-mal conditions , protecting the current& equipment from overload&under voltage, circuit breaker with rated frame current 400A or below,can be used in mouse cage motor's non-frequent start,breaking during working, protecting motor from overload, short circuit&under voltage,the product conforms to IEC60947-2 standard.
GV2 3 Phase Motor Protection Circuit Breaker is mainly used for the overload and short circuit protection of the motor in AC 50/60Hz,rated voltage up to 660V,rated current 0.1-80A power circuit,as a full-voltage starter to start and cut off the motor,under the AC3 load or for the overload and short circuit protection of the circuit and power equipment in the power distribution network.
GV3 Motor protection circuit breaker MPCB is mainly used for the overload and short circuit protection of the motor in AC 50/60Hz,rated voltage up to 660V,rated current 0.1-80A power circuit,as a full-voltage starter to start and cut off the motor,under the AC3 load or for the overload and short circuit protection of the circuit and power equipment in the power distribution network.
ABE 3 pole mccb breaker types is one of products developed and manufactured by adopting international advanced technology. MCCB is supplied with rated insulating voltage 550V and 800V and used for circuit of AC 50/60Hz, rated operating voltage AC 400V(or below), rated operating current up to 630A for infrequent changing over and starting of the motors. The electrical moulded case circuit breaker MCCB conforms to IEC60947-2 standard.
High initial permeability, high output voltage, core size saving. Low core loss, good tolerance ability for large current impulse, good protection of Tripping of high current High cuire temperature, good temperature stability, -55~130, Competitive price
Futina 1 Pole 16 Amp MCB Circuit Breaker FTDZ47 Futina is one of the switch and socket electrical wholesalers in China, who located in Shunde, Foshan, where close to Guangzhou city. FUTINA as the famous circuit breaker supplier of China, we alway focus on providing high quality and good sevice to our clients. 16a single pole mcb circuit breaker FTDZ47 which as the FIRST generation circuit breaker, it with classical outlook design and stable high quality guarantee. Specification of 1 Pole 16a breaker FTDZ47 Product name 1 Pole 16 amp MCB circuit breaker FTDZ47 Rate current 16amp Model Number FTDZ47 Rated Voltage 230V Pole 1P Rated frequency(Hz) 50/60Hz Breaking Capacity 4.5KA-6KA Mechanical Life 15000-20000 Material PA66/Copper Place of Origin Shunde, Guangdong, China Brand name FUTINA & OEM & ODM Certificate CE/CB/Rohs/ISO9001/ISO14001 Warranty 1 year MOQ 500pcs Supply Ability 1000000 Piece/Pieces per month Packaging Details Carton packing: 10pcs/box, 240pcs/ctn Delivery time 25-45days Carton size Size: 420*240*340mm Weight G.W: 23 KG/Carton Package 10pcs/box, 240pcs/ctn Highlight Of 1 Pole 16 amp MCB circuit breaker FTDZ47 The bold design in red color Adopting the flame retardant materal and high quality copper material. Complete range incuding 1P/2P/3P/4P MCB and RCCB leakage circuit breaker CE/CB certificate are available Now the mcb single pole 16 amp price is reasonable, anything you need, please contact us. By now, as the established electrical wiring devices manufacturer, Futina wiring devices and electrical products was verified by both ISO9001 and ISO1400, quality and environment management wiring devices systems, and all wiring devices and electrical products with quality certificates, such as CCC, CE, CB, RoHS,GCC, SQM, etc.
Futina MCB 1 Pole Circuit Breaker FTD1 Futina switch a circuit breaker supplier from 1995, who provide a professional technique support, high quality circuit breaker wholesale and good service. Futina has strong power to offer OEM/ODM. Futina MCB circuit breaker is adopting flame retardant material and copper material, provide the saftey protection envirnment of user. Specification of 10 Amp MCB Circuit 1 Pole Breaker FTD1 Product name 1 Pole 10 amp MCB circuit breaker FTD1 Rate current 10amp Model Numberï¼? FTD1-63 Rated Voltageï¼? 230V Pole: 1P Rated frequency(Hz) 50/60Hz Breaking Capacityï¼? 4.5KA-6KA Mechanical Life 15000-20000 Material: PA66/Copper Place of Origin: Shunde, Guangdong, China Brand name : FUTINA & OEM & ODM Certificate: CE/CB/Rohs/ISO9001/ISO14001 Warrantyï¼? 1 year MOQï¼? 500pcs Supply Ability 1000000 Piece/Pieces per month Packaging Details Carton packing: 10pcs/box, 240pcs/ctn Delivery time 25-45days Carton size Size: 420*240*340mm Weight G.W: 23 KG/Carton Package 10pcs/box, 240pcs/ctn Highlight Of 1 Pole 10 amp MCB circuit breaker FTD1 10a single pole mcb circuit breaker FTD1 Adopting the flame retardant materal and high quality copper material. Complete range incuding 1P/2P/3P/4P MCB and RCCB leakage circuit 10a breaker Increasing safety distance to prevent electric shock and provide Quick power off only need 0.1 second With a big heat proof housing ensure the low temperature rise Big operation pin with clear ON/OFF indicator. Now the 10a single pole mcb price is reasonable, if you have needs, please contact us. As one of the professional wiring devices manufacturers, since 2015, Futina wiring devices and electrical products laboratory center had gotten the CNAS certificate, which granted the qualification of testing and verifying 9 essential national standards. With an elite team of engineer, Futina invests more than $1,500,000 per year on wiring devices research and development, which enable its advanced position in the wiring devices and electrical products industry.
Our MCB is an automatically operated electrical switch. Miniature circuit breakers are intended to prevent damage to an electrical circuit as a result of excess current. They are designed to trip during an overload or short circuit to protect against electrical faults and equipment failure.
Residual Current Circuit Breaker or RCCB is basically a gadget that senses current and disengages any low voltage (uneven current) circuit whenever a fault occurs. The main purpose of installing a Residual Current Circuit Breaker fundamentally is to protect people from electric shocks or death caused by them.
