Product Features
Wellyoung MGO tile backer board is a ceramic tile underlayment that is manufactured from magnesium oxide as its primary ingredient rather than portland cement. The construction of this product offers a better environmental alternative and an upgrade to replace gypsum drywall and cement underlayment boards. it is a durable, water-resistant environmentally-friendly product that is suitable for use as a tile backer on countertops and floors
Product Specification
tem no. Size(mm) Weight(kg) Quantity/20GP(pallet packaing)
Product Features
1. Normal MgO board: one smooth, one rough surface;
2. Pasted with wall paper;
3. Coated with latex paint;
4. Glued with ceramic tile;
5. With a design of wood or water or other grain.
Product Details
What Is MgO Board?
Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on.
Technical datas:
TEST ITEM UNIT TEST RESULT
Bending Strength Mpa 6MM Width: >18 Length: >15
9MM&12MM-18MM Width: >16 Length: >13
Water Absorption %
MgO Board
Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on.
Product Features
1. Normal MgO board: one smooth, one rough surface;
2. Pasted with wall paper;
3. Coated with latex paint;
4. Glued with ceramic tile;
5. With a design of wood or water or other grain.
Appilications for mgo boad:
In many applications, MgO boards can be used in the same ways as gypsum and Portland cement sheathings. The substitution is not fully direct in terms of sheet thicknesses, fastening methods and joint treatments, but is very similar. This makes MgO board an easy product to use. The possible uses of MgO board are vast, and some of them include:Firewalls. Partitions.Structural sheathing for wood or metal stud walls.Shower stall tile backer board.Facings for structural panels engineered to use MgO as the facing.Shaft liners.Ceilings.Soffits.Fascia.Substrates for coatings and insulated systems (such as Direct-Applied Finish Systems, EIFS, and stucco).
MGO board does not contain asbestos, but some have different types of micro fiber reinforcing. This reinforcing is separate from the surface scrim,and used to cast the MgO sheets.
In addition to the base material of MgO, other types of magnesium cements, wood flour,andvarious additives are included to improve manufacturing and enhance various properties.
Most mgo board has some type of fibrous reinforcement within the core and/or on the face. Often this takes the form of glass mesh, fibers, or a fine screed.
mgo board also contains other additives to enhance flexibility and weather ability. In other words, there are various types of mgo board, but most are essentially the same in terms of their basic composition.
MgO boardsare made as individual pieces that are cut to length as they are poured
onto a castingtray. The initial set occurs horizontally, but the final cure occurs
vertically or with spacebetween the sheets. The MgO is cast in a liquid slurrylike
form (a mixture of MgO powder, and other additives and water) and sets up by
chemical reaction - much like Portland cement does instucco or concrete. The cast
boards are then cured at ambient temperature.
Fire Resistance limit of mgo board:
9mm Wellyoung fire resistant board could be applied for >= 120mins fireproof lightweight partition wall;
12mm Wellyoungfire resistant board could be applied for >= 180mins fireproof lightweight partition wall.
The data is for reference only. Please contact us for more details on fire resistant board in different specifications.
Magnesium Oxide boards are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panel's load capacity meets the requirements of both residential and commercial structures.
With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist.
MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other.
Features
Fire resistant (Grade A1) building mater ial;
Lighter, more flexible and stable than traditional sheeting systems;
Time and material saving - dramatically reducing construction costs;
Environmentally friendly, applying a sustainable production process with reduced CO2 footprint;
Ideal for time, safety and health sensitive construction applications;
Grey MgO Board
Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on.
In many applications, MgO boards can be used in the same ways as gypsum and Portland cement sheathings. The substitution is not fully direct in terms of sheet thicknesses, fastening methods and joint treatments, but is very similar. This makes MgO board an easy product to use. The possible uses of MgO board are vast, and some of them include:Firewalls. Partitions.Structural sheathing for wood or metal stud walls.Shower stall tile backer board.Facings for structural panels engineered to use MgO as the facing.Shaft liners.Ceilings.Soffits.Fascia.Substrates for coatings and insulated systems (such as Direct-Applied Finish Systems, EIFS, and stucco).
Good Substitution of LCPP Paraffin PVC Plasticizer
Plasticizer C02
Description
C02 is specially used to replace GB standard chlorinated paraffin because paraffin has high viscosity, dense, low plasticity when used as plasticizer. It has obvious application advantage comparing with chlorinated paraffin.
a. Good color, suitable for various of color or colorless down-stream products.
b. High thermal stability, decomposition temperature is higher than same data of paraffin, resistance to processing, lighter smell.
c. Good plasticizing efficiency, the plasticity is 1.5:1 compar
ing with paraffin, replace s ame quantity chlorinated paraffin or 30% main plasticizer of paraffin.
d. Good compatibility w it h PVC raw mat erial, 100% replace chlorinated paraffin.
e. Competitiv e pric
e, reduce production cost for down-stream enterprises.
Applications
1. Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations.
2. Low Pt-Co, suitable for light color or colorless products.
3. Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality.
4. Children toy products request eco-friendly plasticizer if necessary, B02 or F01 could replace 30-40% main plasticizer.
Packaging & Delivery
Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum
Delivery Lead Time :within 10-20 days after receiving the deposit
Supply Ability :20,000 ton/year
E01 is kind of special plasticizer developed for medical gloves manufacturer which requests low viscosity plasticizer.
Comparing to other plasticizers, our product is processed from food grade palm oil, it is eco-friendly plasticizer passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations.
A. Viscosity obviously lower than same item of similar plastic
Izer because some pvc products limit to use high viscosity additive
B. Good stability, high plasticizing efficiency, combined with main plasticizer dotp, dinp or tbc will not affect finished product quality.
C. Good compatibility with pv c raw materials, replace 30% main plasticizer.
D. Competitive pric
E, reduc es c omposite cost of gloves.
Applications
1. Passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations.
2. Viscosity is 30 cst (40 ?), solve high viscosity limitation problem, not affects settlement behavior of paste resin.
3. High flash point >200 ?, compliance with processing requirements.
4. Good stability, high plasticizing efficency, mix with main plasticizer would not affect gloves quality.
Packaging & delivery
Packing :200kg iron drum/20mt flexibag/1mt ibc drum
Delivery lead time : within 10-20 days after receiving the deposit
Supply ability : 20, 000 ton/year
High Plasticity New Plasticizer Used for Plastic Flooring
Plasticizer B02
Description
Processed from food grade palm oil, B02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations.
a.Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products.
b.Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP.
c.Normally used in winter due to the low freezing point.
d.Good thermal stability, suit able for different PVC products manufacturers.
e.Good plasticity, w orks better with main plasticizer such as DOP, DBP, DOTP, etc..
f.Cost effective, i
t
would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality.
Usage
widely used in PVC processing industry, special for plastic flooring, synthetic leathers, flex banner, etc..
Applications
1.Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations.
2.Low Pt-Co, suitable for light color or colorless products.
3.High flash point(>200ºC),satisfy processing requirements.
4.Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality.
5.DOTP is main plasticizer in exported PVC floor, A03 could replace more than 50%.
6.Our product could be used in both base layer and medium layer of PVC floor.
Packaging & Delivery
Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum
Delivery Lead Time : within 10-20 days after receiving the deposit
Supply Ability : 20,000 ton/year
PREPARATIONS
The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease,
without laitance and loose particles.
Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water.
MIXING
Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water
based on the condition of stirring and keep stirring around 5 minutes until grouting well.
APPLICATIONS
Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the
stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to
escape. Suggest to blend the grout by auto-mixer for better application.
COVERAGE
25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid
Grouting Mortar.
ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
DESCRIPTION
Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed.
ADVANTAGES
* Easy and ready to use, by water addition only.
* Fast working
* Practical and high adhesive power
* Floor would be flat/ level in a second
APPLICATION
CA-010 is used as a floor screed material surface that canâ??t be exposed and should be
covered with floor material, such as: ceramic, granite, carpet, parquet and other
materials.
Various types of �ooring | Heavy construction equipment | Electrical lightings and �ttings Painting and wall decors | Bathroom and sanitary items | Tiles and Parquets Steel drums | HDPE pipes | Steel and Iron
PFC series hydraulic impact crusher has 45 degree feed chute with replaceable liners. The main frame can be opened by hydraulic device. Thick blow bars with locking tongue set into a replaceable backing bar seat. All curtain liners are interchangeable. Positive rotor lock to ensure the safety of persons who change the rotor. With the strengthening and toughening bear and replaceable backing bar seat, this crusher can be applied to the waste recycling materials processing. Final products are in a good product shape,the low proportion of conifer-like.
Main Features
1). High reduction ratio and crushing efficiency;
2). No-board connection; The blow bar with high chrome (high chromed blow bar).
3). Impact plate with a special shape.
4). Crushed product with cubical shape.
5). Easy maintenance and reliable operation.
6). Discharge sizes can be adjusted.
Quick details of lsaw
Out diameter 325-1420mm (14â?³ -60â?³)
Production process Jcoe
Wall thickness 8-40mm
Length 3-13m
Standards Api 5l, astm a672, astm a53, sy/t5768 -2006, gb/t3091 -2008, gb/t9711 -1
Steel grades Q235, q345, l245, l290, a53, s235, s275, s355, gr.B/x42/x46/x56, a672 b60 cl22
Tpi Sgs, bv, moody, ccic can be arranged before shipment.
Packing In bulk due to big sizes
Surface treatment Anti-rust black painting, anti-corrosion treatment (fbe, 3pe, 2pe)
Tpi ( third party inspection) Sgs, bv, moody, ccic
Applications Liquid shipping like oil, water and fuel, building and constructions, chemical vegetation, power station, as well as foreign drill system.
Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.
Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius
Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces
Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded
DESCRIPTION
a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling.
After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications.
ADVANTAGE
* Light, good workability and sanding properties.
* No cracks and hair cracks. (depends on background)
* Smooth surface, solid and no powdery.
* Can be painted or finished with wallpaper directly after dry in minimum 24 hours
* without using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler : Limestone
3. Color : GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage : 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness
average 7.5m2/25Kg for 2-3mm thickness
6. Thickness : 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life : approx. 60 minutes
SURFACE PREPARATION
* The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
* Porous and absorbent substrates must be pre-wetted prior to application of Starcoat
CN finish coat.
DESCRIPTION
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains
selected filler and additive used for smooth finishing to uneven wall cement based plaster
and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,
smooth, no dust on the surface and ready to be painted with water based paint.
Easy to use, good workability and have a long pot life and correction time even at the
outdoor applications.
USES IN APPLICATIONS
*Cement Based Wall Plaster.
*Precast Concrete.
*Concrete Profile & Concrete Ceilings
*Internal & External.
ADVANTAGE
*Light, good workability and sanding properties.
*No cracks and hair cracks. (depends on background)
*Smooth surface, solid and no powdery.
*Can be painted or finished with wallpaper directly after dry in minimum 24 hours without
using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler: Limestone
3. Color: GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage: 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness
6. Thickness: 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life: approx. 60 minutes
SURFACE PREPARATION
1. The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
DESCRIPTION
AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day.
CHARATERISTIC
* Fast drying and fast curing
* Brushable
* Abrasion and mechanical stress resistant
* Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc)
APPLICATION AREAS
* Warehouse ramps, garages, terraces, parking areas
* Outdoor and indoor stores, industrial shop floors
* Outdoor laundries, gas station, etc..
124824 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
