Lye series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource. V. Features 1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil. 2. Completely removing water and harmful gas from the waste oil. 3. Recovering the color of the treated oil as fresh oil 4. Simple operation, safe and reliable. 5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements. 6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating ac contract and prolong the service life of ac contract. 7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vaccum level, ultra-pressure etc.
1. Electric fuel pumps and assemblies for automobiles, motorcycles of high quality 2. Certification:iso9001:2008, ts16949 3. We supply all the technical parameters including pressure, flow, current, application and as more supports as we can. 4. Allowing return unconditionally within 3 months, and allowing replacement or return for quality problem within 1 year. Neutral package, individual package, or as required.
Series NKVW Vacuum pump sets.
Introduction: This filtration plant is special for filtering waste cooking oil; it removes impurity, odor, water, acid and alcohol etc. from oil completely and effectively. Treated cooking oil color is limpidity, oil is good smell. This filtration plant is suitable for food factory, cooking oil factory, vegetable oil factory, it can help factory reclaim remnants oil. Also, TPF is a good filtration part for bio-diesel oil making. The machine feature and working process: 1. This plant composed by two parts, one is the press filter, and other one is the vacuum oil purifier system. The press filter can remove the big and tiny impurity; the precision of purification can reach to 1 Micro. The Vacuum system equips three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition. 2. For the primary filter, which is made of the stainlessness steel, it is anti-rust and anti-corrupt, it mainly removes the residual impurity which escape from the press filter, making sure the oil have not any impurity when it goes into the water separator and vacuum separator. 3. The water separator, which equips the special filter, which mainly remove the mass water from the oil, because usually the waste cooking oil always contains much water, so we need remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water. 4. After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, Because our machine works under the vacuum and low pressure condition, so it dont need heat the oil to 100 C, usually it just need heat the oil to 45 C, Then it can remove the tiny water, soluble water, acid, alcohol and other volatility liquid and so on completely and effectively. 5. The fine filer, which is equips the stainlessness steel filter, the purification hole is less then 1 Micro, which can make sure the oil is completely clear, no any impurity. Table Parameters: Parameters Unit TPF -10 TPF -30 TPF -50 TPF -100 Flow rate L/H 600 1800 3000 6000 Vacuum degree Mpa -0.06 ~- 0.095 Working pressure Mpa í_0.4 Working Temperature C 0~80 Clean Degree NAS 6 Grade Impurity Size ª¦m 1 Gas Content % 0.1 Acid Value mKOH/g í_0.05 Water content PPM í_10 Working noise dB(A) í_75 Electric heating power KW 36 55 72 84 Total electric power KW 50 68 86 98 Inlet (outlet) caliber mm º¦25 º¦25 º¦32 º¦42 Size mm 1700x1050x1750 1800x1050x1800 1800x1150x1800 2000x1250x1950 Weight Kg 650 720 880 1000
Application: Series JYWL horizontal-closed filtration device is completely closed type and stainless steel mesh filtering system, it is high efficiency, energy saving, closed operation, high-grade filtering precision and decolor, so it is widely applied in chemical, petroleum, food, pharmaceutical and other industries for treating unqualified turbine oil, engine oil, lube oil, also for the waste water. It can separate pigment, particles, wax, colloid, free carbon etc. effectively. Series JYWL adopts novel structure, the machine is mainly composed of seat system, mesh filtering system, seal system, discharging system. Manual operation, live Bolt locks seal. It realizes closed filtering operation, easy discharging residua, no environment pollution. Features: 1.Completely closed filtering system, no environment pollution. 2.Automatic pull-out structure of filter plate, observe conveniently, easy clean. 3.Double-side filter, large filtering size, large capacity for holding residua. 4.Vibrating discharging system, reduce labor intensity. 5.This equipment also can be done as the big capacity and big size filtering system. Parameters: Index name Unit JYWL-5 JYWL-10 JYWL-15 JYWL20 JYWL-30 Flow rate m3/h 5 10 15 20 30 Lift m 5 8 8 10 15 Cleanness NAS 7 6 6 6 6 Weight KG 95 105 120 130 140
Application: Series JL portable oil purifier mainly deal with unqualified insulating oil, turbine oil, lubricating oil etc., this machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per users requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works. Technical parameters: Index name Unit JL-32 JL-50 JL-80 JL-150 JL-200 Flow rate m3/h 1.9 3 6 9 12 Lift m 5 8 8 10 15 Cleanness NAS 7 6 6 6 6 Power KW 0.75 0.75 2.2 3 4 Power supplier 380V 50HZ 3Ph(As per users option) Weight KG 95 105 120 130 140
Our Strength is that we can visit any African and Middle East Countries. We also welcome your respected good selves to visit our factories in India. The Company "KRISHNA INTERNATIONAL" was established in the year 1989 by Mr. Dinesh L. Thakkar and has started export in the year 1994. We introduce ourselves as a Group of 23 Industries Exporting Chemicals, Speciality Chemicals, Pigments, Flavour & Fragrances, Mineral Water Bottling Plant, Soft Drink Plant, and other Machineries & Turnkey Projects. Krishna International with its supporting manufacturers, supported by reputed consultants and experienced oil technologists, offer the state of art equipment and plants from concept to commissioning: Oil Seeds handling and Oil Mills Continuous De-gumming Continuous Neutralization Continuous and Batch Bleaching Continuous and Batch Deodorizing Physical refining Dry Fractionation of Palm Oil Hydrogenated Oil Plant De-waxing Soap Stock Acidulation Fat Splitting and Stearic Acid Solvent Extraction Plants Our Team has a vast experience in the physical refining of various kinds of vegetable oils, which includes palm oil, palm kernel, soyabean, groundnut oil, rice bran and cottonseed oil. We offer a proven technology that is the best, simple and user friendly to achieve maximum color and FFA reduction with optimum performance and quality parameters of finished products. Special Features Two chamber design - pre pressing & full pressing in single stage crushing for better oil recovery & profitable operation. Rigid main frame to withstand heavy operating load for crushing job. It can crush all kinds of oilseeds & special design system for Cotton seed, Sunflower seed, Shianut & Canola crushing. Also we can supply Fish Oil Mill.
Product feature 1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides and free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index including anti-oxides and acid- alkali water-solubility 2. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration 3. It can purify transformer oil on-line without cutting off the power Product description Series zyd-m oil purifier(oil filtration, oil purification, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, oil filter, oil purifier, waste oil disposal, oil reclaiming, waste oil management, energy saving) Application According to fieldwork requirement, this machine equips car wheels, which can be easily moved to any work point by traction. It is especially suitable for purifying transformer oil which locates in fields. This machine can seriously recover transformer oil. The treated transformer oil can reuse again in transformer 1800*1200*1600
Application Double stages transformer oil purifier is applied to treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110v, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features 1. High vacuum: high point-vacuumín5pa; working-vacuumín35pa 2. High absorption speed: absorption speed powerí²333l/sr. 3. Duplex 3d stereo-evaporation, eliminating the liquid water quickly 4. Uk g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5. Distinctive removing impurities system filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power 6.Carbon fiber infrared heating system that can make the oil contain zero sum of ethyne after the treatment. Advantages Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil bdv (breakdown voltage) of 70kv or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices. Oil purifier, oil filter, oil filtration, oil purification, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil separator, oil refinery
Application: Series zyd double-stage vacuum transformer oil purifier machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. Also it can inject the insulation oil into the transformers on line, regeneration the seriously deteriorated oil by removing the polarity materials. The machine is specially applied to vacuum filling oil and drying for power transmission equipments that are over 110kv. The oil technical data after treatment: 1. Gas content less than 0.1% 2. Impurity size less than 1ª8m without free carbon 3. Oil dielectric strength (breakdown voltage) more than 75kv 4. Acidity value less than 0.01 mgkoh/g 5. Dielectric loss factors at 90íµ less than 0.001 Feature: 1. Ph of treat oil í²5.5 2. Acid value ín0.03mgkoh/g 3. Flash point í²145íµ 4. Anti-pressureí²60kv 5. Dielectric loss: dielectric loss: tg ªS (90ípc)% ín0.001 6. High vacuum: high point-vacuum ín5pa; working-vacuum ín35pa 7. High absorption speed: absorption speed power í²333l/sr. 8. Duplex 3d stereo-evaporation, eliminating the liquid water quickly 9. Uk g technology, by which the trace water that is show chain, such as dissolved water, can be removed effectively 10. Instinctively removing impurities system filtering through the double fh trapezoidal network and absorbing by high polymer without mechanical power 11. Argon fiber infrared heating system that can make the oil contain zero sum of ethyne after the treatment. Wooden case
Product characteristic: 1.Matured ic card CNG dispenser 2.Original imported 3600 breakaway valve, keep producing safely. 3.Special filter on line, ice-block proof , clean the greasy dirt, prolong the productsf+ life. 4.Luxurious outer appearance, higher the station image. 5.Three connecting body solenoid valve, can be repaired and maintained on line 6.Repeat to display filling gas note. 7.After filling , type the receipt automatically(select function) 8.Three pipeline supply gas, reduce the compresser work frequently. 9.Can be adjustable and set the filling pressure into the car. 10.Can special produce according to the customers requirement. Main technical specification: Measuring accuracy: fa0.5% Repeated accuracy:50% of the measuring accuracy Measuring unit: filling gas volume:nm3, kg amount: yuan Unit price: yuan/ nm3 , yuan/kg Flow range:1-40nm3/min/nozzle Filling pressure :20mpa Working pressure:25mpa Single measure : 0-9999.99 nm3, kg Filling gas preset: 1-9999 nm3, kg Unit price preset:0.01-00.00yuan / nm3, kg Environmental temperature:-30f¦-50f¦ Power: ac 220vfa20%, 50fa1hz Rating power:250w Explosion proof class: exlbdme ii bt4 complete dispenser exp
Feature: 1. Adopting combination pump, smaller shape and convenient maintenance. 2. Adopting painting-side for common type and stainless steel side for luxurious type . 3. Leading-static and highly-hang oil pipe. 4. Features fueling as ration , resetting by computer and re-displaying when power cut 5. Big-size aluminum nozzle holder. 6. Submersible pump to be optional. 7. Flow meter features high precision and strong reliability. 8. Excellent electromagnetic compatibility and strongly anti-jamming. 9. Be capable of connecting with central computer in gas station. 10.Conveniently combining and extending function. 11.To update ic card fuel dispenser is optional. 12.Electronic calibration. 13.Stop fueling by integer sale. 14.Leaves the communication ports, so it can communicate with the gas station management system. 15.Voice and printer(optional). 16.Can set decimal point for the display, so can be used in many countries with different currency rate. Remark: size, color and design of fuel dispenser can be produced according to customersí» requirement. Technical specification: Ambient temperature: -40 ípc to +55 ípc Max flow: 50l/min or 90l/min Repeating error: ín0.15% Outlet pressure: ín0.3mpa Accuracy: ía0.3% Noise: ín70db(a class) Single volume range: 1-9999.99, 1-999999.99 Humidity: 30% -90% Inlet pressure: í²54kpa Power: ac220vía20% , ac380vía20%(50ía1)hz Unit price range:0-9999 , 0-999999(changeable) Accumulative volume range: 0-9999999999.99
With double-stage vacuum system, two vacuum separating chambers and molecule adsorption technology, this double-stage vacuum transformer oil purifier can increase the purification effectiveness more than three times and efficiently and completely dewater, degas, remove particles to get higher dielectric strength and optimize performance of the oils. Features : 1.Adopting double-stage vacuum system to highly improve working vacuum value. 2.Two vacuum separating chambers with efficient oil atomizing device to increase separating size and separating time and ensure the drying degree and improve dielectric strength which is higher than 70 kv. 3.A suitable purifier for on-line oil purification of substations over 110 kv. 4.Deeply purifying high-grade transformer oil and ultrahigh voltage transformer oil. 5.Independent function of vacuum oil filling and drying. 6. Duplex stereo flash evaporation technology 7.Multi-stage precision purification system; mesh filtration combined with molecule adsorption technology. 8.Efficient heating system to make heating uniformity and decrease power consumption. 9.Double-infrared liquid level controller 10.Interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, the purifier will be power off automatically.
This Series VFD is specially designed for the smart controlling of Electric Submersible Pump (ESP). Input and output structure: Low Voltage (VFD)-High Voltage (Output Transformer) Features: 1. This series provides higher converter efficiency with optimized PWM(Pulse-Width Modulation) technology. 2. Fluctuating voltage protection 3. Converting/Power Frequency switching device 4. The modularized Commutating Units and Inverter units are designed in compact structure 5. The specialized CPU provides comprehensive control over all operating period 6. Provides continual, comprehensive monitoring of malfunctions 7. Provides easy and extensive troubleshooting with alarming and protecting functions 8. Provides standard sinusoidal output waveform Service Conditions: 1. Altitude: Maximum 1000 meters 2. Ambient temperature: ¿C25íµ í½ +50íµ 3. Relative Humidity: 20%í½90% non-condensing 4. Enclosure:IP20ú¿or as userí»s requirementú¬ 5. No explosive and flammable material, no electric dust and gases which making metal corroded, destroying insulation and causing explosion in surrounding environment. Technical Parametersú¦ 1.Input voltage range: 380Ví½480V 2.Output voltage range: 0.8kVí½4.0kV 3.Power: 30kWí½400kW 4..Output frequency range: 0Hzí½60Hz 5. Dimension: 800mm (W)*600mm (D) *1800mm (H) 6. Wight: 355kg (90kW). Four. Parameters of Transformer: 1.Working voltage: Input voltage range: 380Ví½480V Output voltage range: 800Ví½2500V 2000Ví½4000V 2.Working frequency: 20Hzí½60Hz; 15Hzí½55Hz; 3.Capacity: 80kVAí½800kVA 4. Insulation Class: A 5. Cooling: Oil-immersed Self-Cooling
Digital Clamp Meter 1.Resistance measurement 200ª+/continuity check Accuracy:í+ú¿1.5%+5ú¬ 200ª+/200K Accuracy:í+ú¿1%+2ú¬ 2.ACA 600A Accuracy: í+ú¿1.9%+5ú¬ 3.Voltage 600VAC Accuracy: í+ú¿1.5%+5ú¬ 600VDC Accuracy: í+ú¿1%+3ú¬ Insulation Tester Voltage measurement: 0~600VAC Accuracy: í+3% Attenuator 1.Maximum working voltage:2.5kV 2.Accuracy:0.6kV~2.5kV í+0.8%
The most important advantage of the on-line style tester is that it can work when the ESP Unit is running. To put it differently, the insulation resistance of the system can be measured without power off and will keep the ESP system running through most common failures. Technical Parameters: The tested system voltage :< 2500VAC Insulation resistance range:0.5Mª+í½2000Mª+ Measures up to 2500VAC Battery powered ú¿12VDC 8 piecesú¬ Accuracy: 2í½1000 Mª+ í+5% Ambient temperature: ú¡25í½+50
Features: 1.Testing range: ESP (Electric Submersible Pump),Pumping Unit,PCP (Progressive Cavity Pump) 2.Parameters: Three-phase Current, Three-phase Voltage, Active Power, Reactive Power, Apparent Power, Power Factor, Power Consumption 3.Battery: rechargeable Li-ion Battery Continuous Working Time:8 Hours 4.Memory: Data for 70 oil wells 5.Data output mode:RS232 to Computer or Print by Mini-Printer Technical Parameters 1.Voltage range:380v~2000v Error¬é1% 2.Current range:1~75A 1~150A Error¬é1% 3.Power range:0.65kw ~325kw 0.65kw~650kw Error¬é2% 4.Data testing refurbish:400ms 5.Ambient temperature:-25íµ~+50íµ 6.Dimension:350mm(W)*270mm(D)*160mm(H) 7.Weight:6Kg
Specifications: Liquid Air Separator KDONAr--1000/2000/30 Gaseous Oxygen output/purity (oxygen):800Nm3/H/99.6% Liquid Oxygen output/purity (oxygen): 200Nm3/H /99.6% Gaseous Oxygen output/purity (oxygen):2000Nm3/H/10PPM O2 Gaseous nitrogen output/purity: 30Nm3/H /2PPM O2/3PPM N2 Liquid Air Separator KDONAr--1000/2000/30 1) Liquid oxygen output/purity(oxygen): 800Nm3/H /99.6% 2) Pressure of liquid oxygen from cold box: 15KPa.G 3) Liquid nitrogen output/purity: 220L/h
Zy oil purifier is high efficiency vacuum insulating oil purifier, mainly for the power station, industrial and mining enterprises purifying the unqualified transformer oil, mutual inductor oil, switch oil and so on. Series zy can remove water, trace water, gas, particles from oil quickly and effectively, improving oil dielectric strength. Also, this oil purifier can be used to power equipments to vacuum drying, and vacuum oiling. Features: 1.Duplex-stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 2. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 3. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 4. Double-infrared liquid level sensor, pressure protective system to ensure the machine operation easy and safely. 5. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 6. Working with bz insulating oil regeneration device to decolor (remove acid, oxide, free carbon) and lower dielectric loss, making the treated oil more limpidity.
Features: 1. Use of special metal materials which is compatible with fire-resistant oil, combined with technologies of vacuum dewatering, multi-stage filtration system and new adsorbent 2. Stainless steel machine body, pipes and filtering components, reliable, anti-corrosion, durable. 3. Duplex-stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively remove water, gas, particles and volatile matter 4. Advanced medium cooling system 5. High quality filtering components, large capacity for holding particles, anti-corrosion, good mechanical performance, long lifetime. 6. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
