We have a latest technology home automation for both existing & upcoming building can control for any existing electrical wiring.8 and 12 module automation board, latest home automation contron. It is approximate 800gram , available in 8 and 12 module
1. Packaging Detail: In 100% Original Cisco standard carton box 2. Delivery Detail: In 3 days after receipt of payment 3.100% original 4.one year warranty 5.favorable discount price 6.flexible payment method.
1.Packaging Detail: In 100% Original Cisco standard carton box 2.Delivery Detail: In 3 days after receipt of payment 3.100% original 4.one year warranty 5.favorable discount price 6. flexible payment method.
1.Packaging detail: in 100% original cisco standard carton box 2.Delivery detail:in 3 days after receipt of payment 3.100% original 4.One year warranty 5.Favorable discount price 6.Flexible payment method.
Diversified interfaces including SFP+ TO SFP+, SFP+ TO XFP, XFP TO XFP, Supports 3r (re-generation, re-timing, re-shaping) Fiber mode converter between fiber to fiber 10gbps equipment, or fiber repeater for long distance transmission 1310nm /1550nm/cwdm/dwdm optical wavelength conversion. Oeo for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Transmission rate:9.95gbps-11.35gbps Support hot plugging . Standard package
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console They can realize the integrated management to all chassis. Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port. Supporting remote and local management. With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters. Standard package
Built-in ip-based web interface. Supporting remote and local management. Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode Manual ip address setting/dhcp client for ip address assignment. Event trap and snmp trap support. Password setting, ip setting and devices description setting through planet smart discovery utility Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module. Standard package per customer
10gbps fiber to copper media converter for long distance transmission Network management function web snmp console Support dmi function for sfp+ fiber module Support itut prescribed dwdm/cwdm wavelength Media converter for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Sfp+ fiber module detection, utp cable length detection Support hot plugging Type: rj45 to/from sfp+. Standard package per customer
(1) type: european style, (2) power: 10a 250v, (3) material: abs, copper, ceramic. Each one in polybag, 10pcs in a box and 20 boxes in a size of 39*31*47 carton
Place of Origin Hong Kong Brand Name Suyog Model Number TC-1312E TOP. 1000pcs/Rohs plastic bag/inner box/outer carton, safety package.
Place of Origin Hong Kong Brand Name Suyog Model Number TC-1312 buckling pins 500pcs/Rohs Plastic bag/Inner box/Outer carton.safety package
Place of Origin Hong Kong Brand Name Suyog Model Number TC-1312B Application of TACT switch series Widely apply to: 1.Audio Products:MP3,MP4,DVD. Audio; 2.Digital Products:digital camera,digital video and so on; 3.Remote Control:the remote control of automobile domestic security products; 4.Communication Products:mobile phone,vehicle-mounted phone,telephone set,building equipment,PDA and so on; 5.Homehole appliances:TV set,microwave oven,electric rice cooker,electric fans and so on; 6.Security Products:visual interphone,monitor and so on; 7.Toys:electric toys and so on; 8.Computer Products:PC camera and so on; 9.Exercises Machines:treadmills,massage armchair and so on; 10.Medical Device:sphygmomanometer,thermometer,hospital call system and so on; 11.Others:Counterfeit Money Defector Pen,laser pen and so on; 4000pcs/reel/inner box/outer carton. Safety package.
Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install. Features: This Converter has many features that enable it to perform in a superior manner. Among those features you will find: 1. Converts Coaxial or Toslink digital audio signals to analog L/R audio 2. Supports sampling rate at 32, 44.1, 48 and 96 KHz. 3. 24-bit S/PDIF incoming bit stream on left and right channels 4. Provides electromagnetic-noise-free transmission. 5. Easy to install and simple to operate. SPECIFICATIONS: Signal Inputs/Output: Input Audio : Coaxial or Toslink digital audio Output Audio: L/R audio Connector: Input audio connector: Toslink. 1XRCA(Coaxial) Output audio connector: 2XRCA R/L£© Sampling rate: 32, 44.1, 48 and 96 KHz Mechanical: Size(L-W-H): 51X41X26MM Weight (Net): 78g Warranty: Limited Warranty: 1 Year Parts and Labor Environmental: Operating Temperature: 0 to +70 Operating Humidity: 10% to 85 % RH (no condensation) Storage Temperature: -10 to +80 Storage Humidity: 5% to 90 % RH (no condensation) Power Requirement: External Power Supply: 5V DC@2A Power Consumption: 0.5 watts (max) Regulatory Approvals: Converter Unit: FCC,CE,UL Power Supply: UL,CE,FCC Accessories Adapter: AC Power Adapter: US standard, UK standard and so on User Manual: English Version. Size(L-W-H): 51X41X26MM Weight (Net): 78g.
Introduction: Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor. Features: * Video and audio in full digital HDMI format, no transmission loss! * Supports all Wii display modes (NTSC 480i 480p, PAL 576i). * HDMI upscale to 720p or 1080p high definition output. * Provides advanced signal processing with great precision. Colors, resolutions! * High quality, state of the art motion adaptive de-interlacing for 480i ,576i input. * No power adaptor, no messy cords¡Xjust one HDMI cable. * Hassle Free! Plug and play as you go. Specification: Dimensions: 34 x 73 x 14 mm Weight: 15g Power Consumption: below 2W Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i) Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz Input Connector: Wii AV Multi Out Plug x 1 Output Connectors: HDMI Connector x 1 3.5mm Stereo Audio Jack x 1 Setups for Connecting to a TV/Monitor with HDMI Input: 1. Make sure that the Wii console is powered Off. Then insert the AV Multi Out Plug of the Wii2HDMI into the AV Multi Out Connector in the back of the Wii console. 2. Plug one end of the HDMI cable into the Wii2HDMI HDMI output, and plug the other end to the HDMI input on the TV/monitor. 3. Turn on the TV/monitor and switch the video input of the TV to match the HDMI input connector used by the Wii2HDMI. Then you should be able to see the Wii screen after you turn on the Wii console. Set the Wii Video Output to 480p Mode: Under 480p mode, the image data is double what it is under the 480i mode. Therefore, the 480p mode can provide you with much better display quality. In addition, as long as your TV/monitor has HDMI input, it is technically compelled to support the 480p mode; and even though most of the TVs/monitors support the 480i mode, it is not the usual standard. In conclusion, 480p is a better mode for higher display quality, as well as a better solution to avoid compatibility problems with TVs/monitors. Therefore, we strongly recommend that when you use the Wii2HDMI, you set the Wii video output to 480p mode. The detailed setups are as follows: 1. Make sure that the Wii console is powered off and that no disc is in the tray. 2. Power on the Wii console to reach the Wii Channel menu. Then, click on the "Wii" button on the lower lefthand side. 3. On the next screen, select the Wii Settings on the right-hand side. 4. From the Wii System Settings 1 screen, select the Screen button. 5. From the Screen screen, select the TV Resolution button. 6. From the TV Resolution screen, select the EDTV or HDTV (480p) button, and click the "Confirm" button on the lower righthand side. At this point, you should have successfully set your Wii video output to 480p mode. VERY SMALL NW: 0.06kg gw: 0.08kg 7.5cm*3.8cm*1.5cm.
Features: * It regenerates the incoming HDMI signal by decoding and re-encoding it to a new standard HDMI signal so it can extend the transimission range without degradation. * Extends 1080p/UXGA up to 40 meter transmission distance(lower resolution signal can be transimitted longer). * HDCP 1.1 compliant. * No Power, Plug and play, easy to install. Specifications: * HDMI is compliant with HDMI 1.3 * HDMI HDCP is compliant with HDCP 1.1 * Downward compatible with DVI 1.0 and HDCP 1.0 * Operation frequency up to 165MHz * HDMI data rate: 1.65G bps(Single link) * Input/Output resolution * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm. * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm.
Introduction: The HDMI Extender over ONE CAT5E/CAT6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT5E/CAT6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Extender and receiver, over ONE CAT5E/CAT6 extender is your substantial HDMI extender tool. Features: HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant. * Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality. * Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away. * When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is 50 meters. * Supports XVYCC Specification: Frequency Bandwidth : 2.25Gbps (single link) HDMI Transmitter Input/Output Ports: 2 x HDMI Female port/1 x CAT5E/CAT6 HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT5E/CAT6 Power Supply: 5V/1A DC ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge) Dimensions (mm): 65(W) X 100 (D) X 25 (H) Chassis Material: Aluminum Operating Temperature: 0C ~ 40C / 32F ~ 104F Storage Temperature: -20C ~ 60C / -4F ~ 140F Relative Humidity: 20~90% RH (non-condensing) Operation Controls and Functions: 1. HDMI Extender Transmitter Front Panel 1) HDMI1:HDMI1 Input port. 2) SW: Switch the HDMI1 and HDMI2 input port. 3) HDMI2:HDMI2 Input port. Rear Panel: 1) Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. 2) LED indicator: When the DC5V power on, the Indicator will be light. 3) CAT5E/CAT6 OUT: Connect the CAT5E/CAT6 output of the transmitter with the CAT5E/CAT6 input of the HDMI over single CAT5E/CAT6 receiver. 2. HDMI Extender Receiver Front Panel 1) HDMI Out: HDMI output port. 2) LED indicator: When the HDMI input signal is locked, the indicator will be light. Rear Panel: 1) Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. 2) LED indicator: When the DC5V power on, the indicator will be light. 3) CAT5E/CAT6 Input: Connect the CAT5E/CAT6 Input of the Receiver with the CAT5E/CAT6 output of the HDMI over single CAT5E/CAT6 Transmitter. Package: Product: SUM(PCS): Remark HDMI Extender Transmitter: 1 HDMI Extender Receiver: 1 5V DC Power Supply adaptor: 2 Operation Manual: 1: English. Dimensions (mm): 65(W) X 100 (D) X 25 (H) Chassis Material: Aluminum.
Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor. Features: * Video and audio in full digital HDMI format, no transmission loss! * Supports all Wii display modes (NTSC 480i 480p, PAL 576i). * HDMI upscale to 720p or 1080p high definition output. * Provides advanced signal processing with great precision. Colors, resolutions! * High quality, state of the art motion adaptive de-interlacing for 480i ,576i input. * No power adaptor, no messy cords¡Xjust one HDMI cable. * Hassle Free! Plug and play as you go. Specifications: Dimensions: 34 x 73 x 14 mm Weight: 15g Power Consumption: below 2W Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i) Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz Input Connector: Wii AV Multi Out Plug x 1 Output Connectors: HDMI Connector x 1 3.5mm Stereo Audio Jack x 1.
Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A Color packing : neutral packing.
Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A * Dimensions: 250 x 161 x 50.5mm * Weight: 1690g.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging
