What is ferrochrome? Ferrochromium is made using metallurgical grade chrome ore and can be divided into three categories, depending on the level of carbon in the alloy. The three types of ferrochrome alloys are: High-carbon (HC) ferrochrome (carbon content between 4% and 9%) Low- and medium-carbon (LC & MC) ferrochrome (carbon content less than 0.5% for LC and between 0.5% and 4% for MC) Ferrochrome-silico-chrome (FeSiCr) Ferrochrome applications: Production of steel, especially stainless steel with chromium content of 10 to 20%, is the largest consumer of high-carbon ferrochrome. Over 80% of the worldâ??s ferrochrome is used in the production of stainless steel. The vast majority of ferrochrome produced is� charge chrome, which has a lower chrome content ratio. Used most commonly in stainless steel. Low carbon� and� medium carbon� ferrochrome is used in the manufacture of special steels. Low carbon ferrochrome can be used to produce superalloys.
We are suppliers of Chrome Ore of South African and Zimbabwe origins. Please contact us if you have requirements for this product. Thank you
Chemically classified as follows: - High grade Cr2O3 > 46%. - Medium grade 32- 46% . - Low grade 25- 32% .
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3â?¥75% Fe2O3â?¤3% K2Oâ?¤1% TiO2â?¤4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850â?? 6.Thermal expansion Rate:0.13% 7.Size: 10-20meshã??20-30meshã??30-40meshã??40-70meshã??100-140meshã??170mesh with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850 6.Thermal expansion Rate:0.13% 7.Size: 10-20mesh 20-30mesh 30-40mesh 40-70mesh100-140mesh 170mesh
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3%
Ceramic Foundry Sand Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Cr 60%min, C0.06%max, Si1.5%max,P0.04%max,S0.03%max
Specifications Place of Origin: India Cr: 60% min Phosphorous: 0. 03 % max. Silicon: 1. 5 to 2 % Iron: 18 to 22% Purity: 100%
1) Chrome Ore Lumpy (10mm to 100mm Size) Qlty 40%+ 2) Chrome Ore Concentrate (powder ) 50%+
Chromite ore CR203 available above 50% price negotiable 1000 ton available FOB Karachi Port.
Chromite Sand - AFS 50 Cr2O3 Fe2O3 MgO Al2O3 SiO2 CaO Na2O K2O 46-48% 24-27% 9-11% 15-18% 0.5-1.0% Max 0.05% Max 0.01% Max 0.01% Chromite Sand - AFS 45 Cr2O3 Fe2O3 MgO Al2O3 SiO2 CaO Na2O K2O 45% 29% 9-11% 16% 1.0% Max 0.2% Max 0.01% Max 0.01% Contact person: Danny Tao
Chrome ore is one of the most usefull mineral due to its usage in production of metallic chromium, used as an alloying ingredient in stainless and tool steels. Chromite is also used as refectory material due to its high heat stability. Pakistan is rich with overwhelming deposits of high quality chromium ore. Pakistans chromium quality is considered to be amongst the best in the world due to ore size and its Cr:Fe ration.
We Supply Quality Tested by the accredited laboratory of China and CCIC accepted, and currently used by China and other Country, passing the required Assay Test and its Elements
we are well placed to supply/export chromite 40% to 55% of LOGAR AFGHANISTAN in big quantity available.which is Known as world best quality and it is in demand all over world .
Chromite is a mineral that is an iron chromium oxide. It has a chemical formula of FeCr2O4. It is an oxide mineral belonging to the spinel group. The element magnesium can substitute for iron in variable amounts as it forms a solid solution with magnesiochromite (MgCr2O4). Chromite today is mined particularly to make stainless steel through the production of ferrochrome (FeCr), which is an iron-chromium alloy. Chromite grains are commonly found in large mafic igneous intrusions such as the Bushveld in South Africa and Travancore in India. Chromite is iron-black in color with a metallic luster, a dark brown streak and hardness on the Mohs scale of 5.5.
