It is mainly used for exterior wall construction, decoration, cleaning and maintenance of high-rise buildings.
The safety lock automatically fasten the steel wire rope within 100mm, when the load cable is stuck or broken, out of hoist or the platform is inclined.
The platform can be made of steel or aluminum alloy according to your desire.
The specifications are as follows,
Model: Zlp 630 Zlp 800
Rated loading capacity: 630kg 800kg
Lifting speed: 9.6m/min 8m/min
Length of the platform: 1m-6m 1m-7.5m(according to the customers' desire)
Standard length: 2m*3 set 2.5m*3 set
Weight of the platform: 358kg 450kg
Power of the motor : 1.5kw*2set 2.2kw*2set
Model of the hoist : ltd6.3 Ltd8.0
1Its very rigid body frame is welded by shaped steel tube, no deform.
2It can perform horizontal, vertical directions and cubic 3 directions cut.
3Built-in converter is used for wide scope speed so is motion stable and a fit slow feed back.
410KVA malt lead special transformer is multi-lead for poly step voltage adjust, so is high production efficiency and long use life.
Specification and parameter
Type Unit XMC-2000 XMC-3000 XMC -4000 XMC-6000 XMC-8000
Items
Cutting block size MM 2000-1300
-680 3000-1300
-680 4000-1300
-1300 6000-1300
-1300 8000-1300
-1300
Over all dimension MM 4500-1640
-2700 5800x1950
x1850 6800x1950
x2450 8800x1950
x2450 10800x1950
x2450
Weight Kg 800 1000 1200 1600 2000
Power Kw 11.2KW 11.2KW 11.2KW 11.2KW 11.2KW
1.Size of Coil1220+¼-0.71.2+¼-L; aluminum,prepainted steel or GI steel coilYield strength G550Mpa
2.Working speed15m/min(not include cutting)
3.Roll station24stations
4: Material of roller: 45forge steel, polished and coated with chrome
5: Material of main shaft:45forge steel diameter roller90mm
6.Main power22Kw
7.Hydraulic station power5.5Kw
8.Hydraulic pressure12 Mpa
9.Control Panel: PLC, Simenz
10. Material of blade Cr12Mov
11.Thickness 0.81.2mm
12 Tolance3m+-1.5mm
13 Way of drive:one inch chain
14 380V 50HZ
15 Uncoiler: 10Ton Manual passive uncoiler
16 Three roller which can curve the final product according to the profiles
1.1 Main dimension: 11400 x 1600 x 1800mm
1.2 Total weight: 14000kg
1.3 Main motor: 18.5kW
1.4 Hydraulic motor: 5.5kW
1.5 Hydraulic pressure: 15-20MPa
1.6 Steps of rollers:
Feeding & guiding: two sets
Leveling: one set, seven rollers
Main forming: 17 steps
Rib making: one step
Rectifying: one step
1.7 Forming speed: 15 m/min maximum
1.8 Changing speed from one profile to another or from one size to another size: 3 minutes.
1.9 Purling specifications:
For C purling: 100-350mm
For Z purling: 100-350mm
1.10 Suitable material: 1.6-3.2mm, Q195~235 cold rolled steel, hot-zinc coil
1.11 Material of rollers: GCr15, 9CrSi, quenched
1.12 Material of rib roller: GCr15, 40Cr, quenched
1.13 Shape of rib: slash rib
1.14Dimension of punch adjustable:45-500mm
This machine is the latest model that is developed for minimizing the manpower.
On this machine, the system is working from roll to roll or roll to cut piece. The machine is formed of the following units;
Roll feeding unit with edge control
Side sealing unit
Reserve unit
Spout sealing unit -1 (bottom spout sealing)
Spout sealing unit -2 (top spout sealing)
Perforation unit
Bottom sealing unit
Roll re-winder unit (optional)
Length cutting (cold cut) unit
Description:-
This is the latest in grinding technoiogy for rernoving all types of coatings, stains, contamination and flooring inperfections.
High performance machine for concrete floor preparation.
Ideal machine for preparing ondustrial floors to take epoxy or other toppings.
Removes up to 4mm in one pass.
Handwheel for precise grinding depth.
Two speed forward and reverse transmission.
High performance octagonal carbide tipped cutters.
Vacuum attachment, lifting sling, safety switch.
7.5 KW, 440 w motor, Weight 350 Kg.
Working width 300mm.
Output : 50 m2/hr.
Specifications:-
Length of compaction shoe - 700mm
Width of compaction shoe - 500mm
over all length - 1500mm
over all width - 500mm
over all height - 1500mm
Travel speed - 10m/min
Depth of compaction - 30cm
Weight - 150kg
Double beam screed vibrator
Jamshedji double beam screed vibrator is self-traveling and only requires guiding along the formwork dragged by two operators and they do not need to work in concrete. It is light in weight, economical to maintain, durable high quality heavy-duty spring steel, portable stressing bars for leveling.
Beams of different sizes can be provided, if ordered.
Description --------------- Value
Working weight --------------- 180kg
Working width --------------- 560 mm
Actual load --------------- 2.9 kg/cm
Walking speed --------------- 1.6 km/hr
Frequency --------------- 4620/rpm
Centrifugal Force --------------- 10 km
Engine --------------- G X 160 5.5hp (Petrol)
The JKY modelíóJKB modelíóJKR model are advanced twin-stage vacuum Brick Presses which draw lessons from the developed domestic, abroad experiences and design to make .They are mainly made of high quality steel with features of reasonable structure, sturdy and durability. And they have strong applicability, high efficiency, easy maintenance but lower energy consumption. They are applicable for the production of high-rate hollow bricks with the materials of coal gangue, shale, high-volume fly-ash, urban construction waste, gangue waste, inferior soil.
Load the material for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings outward and presses closely upon the ring. The shovel carries the material to the space between the roller and ring. When the roller rolls, the material is thus ground.
After being ground, the material is to be routed to the sorter along the wind belt of the blower and the coarse powder will be put back to the mill for regrinding. The fine powder flows into the cyclone collector together with airflow and is expelled from the discharge pipe as final product.
In the grinding chamber, since the material may contain moisture to some extent, the heat generated during grinding makes the moisture evaporated; since the pipeline joints are not airtight, the external air is sucked in and the circulation air amount increases. In order to enable the mill to work under negative pressure, the increased airflow is guided to the deduster anew sequentially to the atmosphere after purification.
Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine.2 It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine.
To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, creat custom varnishes,make ceramic glaze, powder various chemicals, and make Black Powder.
The py series cone crusher has been developed to crush high or medium hardness material , such as iron ore , copper ore, limestone, quartz, granite, and sand stones, ect. And it is used in metallurgical, construction, road building, chemical, silicate industries.The cone crusher has the advantage of reliable construction, high prod activity , easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. Cone crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.
The main features of cone crusher:
1.The py series crushers crushes by the change of the gap in the crushing cavity .The gap is opened and closed by the gyration of main shaft, which is derived by motor through cone gears.
2.The py series cone crusher is of high reduction ratio, high performance, low power consumption, and uniform size products. It has been used in the secondary and tertiary crushing.
3.The cone crusher consists of body frame, transmission shaft, eccentric sleeve, cone bearing, breaking cone, supporting sleeve, adjusting sleeve, feeding part, spring, elastic coupling , lubrication part , electric part, ect.
